Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content

Filters

Laser Engravers for Coins

Making challenge coins, medallions or custom tokens? A laser engraver for coins needs real depth, which means a fiber laser in the 60W to 200W range. These machines engrave roughly 0.5mm to 1mm into brass, copper, silver and steel in practical run times, so relief designs and edge text feel minted rather than printed. MOPA sources add finer control for polished backgrounds.

At The Maker's Chest, our coin engraving machines include high-power MOPA fiber lasers from ComMarker, Haotian, OMTech, Gweike and BWM, plus coin and metal engraving bundles with rotary and safety gear. Whether you want a challenge coin laser engraver for a side business or a 2D and 3D deep engraver for production runs, we'll help you match wattage and lens to the depth your customers expect, with tested settings and support.

Looking for a Laser Engraver to Make Challenge Coins?

Frequently Asked Questions

Can you make challenge coins with a laser engraver?

Yes. A high-power fiber laser can engrave blank brass, copper, nickel-silver or steel coins with deep relief artwork, text and edge lettering, and can also cut thin coin blanks. Deep coin engraving needs at least 60W, and 100W or more is much faster. Lower-power lasers can mark coins, but the result looks printed rather than struck. Colored enamel fills can be added after engraving.

How many watts do I need for coin engraving?

For light marking on coins, 30W works. For true relief engraving of 0.5mm or more, choose 60W to 100W, and for production volumes 100W to 200W. Each step up in power cuts engraving time sharply on deep jobs, because more material is removed per pass. MOPA sources give finer control over pulse width, which helps with smooth, polished floors in the engraved area.

What metal is best for laser engraved coins?

Brass is the most popular choice for laser engraved challenge coins because it engraves cleanly, polishes well and is affordable. Copper and silver engrave well but are more reflective, so they need higher power or slower settings. Stainless steel gives the most durable coin and supports MOPA color marking, but engraves more slowly. Always test settings on your exact blank before a production run.

Skip the AI. Call an Expert. Skip the AI. Call an Expert.