Experience the pinnacle of fiber laser marking with the Monport GA Integrated MOPA Fiber Laser Engraver & Marking Machine.
Introducing the Monport GA Integrated MOPA Fiber Laser Engraver & Marking Machine - the ultimate all-in-one solution for high-performance, cost-effective laser marking!
Compatible Materials:
|
Metal
|
Plastics
|
Stone
|
Leather
|
Rubber
|
![]()
![]()
The Monport GA Integrated MOPA Fiber Laser Engraver & Marking Machine brings professional-grade fiber laser marking into a true all-in-one body. Built around a 60W or 100W JPT MOPA laser source, the GA combines one-click autofocus, a 90° rotating marking arm, and advanced MOPA pulse control in a compact aluminum enclosure — no external controller, no complex cable runs, no wasted bench space.
-
60W or 100W JPT MOPA fiber laser for vibrant color marking on metals
-
Marking speed up to 10,000 mm/s for high-throughput production
-
One-click autofocus with less than ±1 mm precision — no manual focal adjustments needed
-
Color marking on stainless steel, black marking on anodized aluminum, 3D relief engraving, and thin metal cutting — all from one machine
-
90° rotating laser head expands engraving area from 175 × 175 mm to 300 × 300 mm
-
Built-in foot pedal function for hands-free triggering
-
One-minute setup — unfold, tighten two screws, engrave
-
3D relief engraving for intricate dimensional designs with precise depth and texture control
Whether you're a professional engraver, a maker creating custom projects, or an industrial manufacturer seeking to boost productivity, the Monport GA is your gateway to a new level of laser marking excellence. Experience the future of precision marking today.
All-in-One Integrated Design
The GA is a true all-in-one marking machine — laser source, controller, optics, and autofocus system all housed in a single compact aluminum body. No separate control cabinet, no external components to manage. The streamlined build means less desk space, less cable clutter, and faster deployment in any workspace. Whether you're running a small custom shop or a production line, the GA is ready to work right out of the box.
One-Click Autofocus & Micron-Level Precision
Monport's proprietary one-touch autofocus brings the laser to optimal focus in a single click, with an error margin of less than ±1 mm. For users who prefer manual control, a three-point red light alignment system makes manual focus straightforward. Either way, the GA delivers engraving accuracy down to 0.01 mm and positioning accuracy of ±0.1 µm — consistent, repeatable results on every job.
Color Marking, 3D Relief, Deep Engraving & Thin Metal Cutting
The MOPA architecture gives the GA a wide range of adjustable pulse parameters — frequency from 1–3,000 kHz and pulse width from 2–500 ns — enabling capabilities that standard fiber lasers can't match:
-
Color marking on stainless steel — vivid, durable color engravings by adjusting pulse frequency and width
-
Black marking on anodized aluminum — high-contrast surface marking without material removal
-
3D relief engraving — precise depth control for textured, dimensional designs with exceptional detail
-
Deep engraving — up to 0.004 in (0.10 mm) single-pass on the 60W; up to 0.006 in (0.15 mm) on the 100W
-
Thin metal cutting — capable of cutting sheets typically under 3 mm, including stainless steel, aluminum, and brass
Compatible materials include: stainless steel, carbon steel, aluminum, brass, copper, gold, silver, titanium, tungsten, carbide, hard plastics, marble, and granite.
90° Rotating Arm for Maximum Versatility
The GA's vertical marking arm rotates within a ±90° range, letting you mark at virtually any angle without fully dismounting the head. A quick loosen-and-adjust mechanism makes repositioning fast. Rotating the head 90° also expands the effective engraving area from 175 × 175 mm to 300 × 300 mm — significantly increasing the range of workpieces you can mark without repositioning.
One-Minute Setup, Ready to Run
The GA's foldable vertical arm design means setup takes about a minute — straighten the arm, tighten two screws, connect power, and you're ready to engrave. The built-in foot pedal function enables hands-free triggering for high-volume or production workflows. Fully compatible with LightBurn and BslAppSimple on both Windows and macOS via USB.
Specifications and Features
- Laser Power: 60W/100W
- Laser Type: 60W/100W MOPA Fiber
- Machine Dimension: 37.5cm x 50cm x 65cm
- Color Marking: YES
- Working Area: 6.9"x 6.9"
- Marking Speed: 10000mm/s （Up to 15000mm/s）
- Expected Service Life (MTTF): 100,000 hr.
What's Included With GA Integrated MOPA Fiber Laser?
- Fiber marking machine*1
- Marking test cards*8
- USB data cable*1
- U disk*1
- Wrench*1
- Steel ruler*1
- Positioning bar*2
- Screw*4
- Power line*1
- Protective glasses*1
- Instruction Manual*1
Frequently Asked Questions About Monport GA Integrated MOPA Fiber Laser Engraver & Marking Machine
What materials can the Monport GA engrave and mark?
The GA works on a wide range of metals and hard materials, including stainless steel, carbon steel, aluminum, brass, copper, gold, silver, titanium, tungsten, carbide, hard plastics, marble, and granite. Its MOPA architecture also enables color marking on stainless steel and black marking on anodized aluminum — capabilities not available on standard fiber lasers.
What's the difference between the 60W and 100W versions?
Both share the same form factor, feature set, and specs. The key difference is max single-pass marking depth: the 60W reaches 0.004 in (0.10 mm) and the 100W reaches 0.006 in (0.15 mm). The 100W also weighs slightly more (75 lb net vs. 70.5 lb). For heavy industrial deep engraving or cutting thicker metals, the 100W is the stronger choice.
Can it do color marking?
Yes. The MOPA laser allows adjustment of pulse width and frequency to produce color markings on stainless steel and black markings on anodized aluminum. Results vary by material, surface preparation, and settings.
Can it cut metal?
Yes. The GA is capable of cutting thin metal sheets typically under 3 mm, including stainless steel, aluminum, and brass. Results depend on material, thickness, and settings.
How does the autofocus work?
Press the autofocus button and the machine calculates and sets optimal focal distance automatically, with an error margin of less than ±1 mm. Manual focus via three-point red light alignment is also available.
What software is compatible?
The GA works with LightBurn and BslAppSimple on both Windows and macOS, connected via USB.
How long does setup take?
About one minute. Unfold the vertical arm, tighten two screws, connect power, and it's ready to use.
What is the expected laser lifespan?
The JPT MOPA fiber laser source has an expected lifespan of 100,000 hours (MTTF). The machine carries a 2-year warranty with a 1-year warranty on the laser source.
