Genmitsu PROVerXL 4x4 CNC Router
By Genmitsu
“I have never experienced customer service at this level with ANY other company serving ANY other market. … Fellow business owners, buy from The Makers Chest with confidence.”
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
By Genmitsu
“I have never experienced customer service at this level with ANY other company serving ANY other market. … Fellow business owners, buy from The Makers Chest with confidence.”
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Unlock Discount
Furniture makers, sign shops and luthiers hit the same wall with smaller CNCs: anything bigger than the bed has to be tiled, re-registered and pieced together. The PROVerXL 4x4 removes that limit with a 4.27' × 4.27' bed, so tabletops, chair parts, door panels and 4' signs cut in a single setup.
It uses the same motion hardware as the PROVerXL 2X2 — HG20/HG15 linear guides, Φ20 mm ball screws and closed-loop steppers — scaled up for small production shops that need capacity without an industrial price.



At 1300 × 1300 × 118 mm, the 4x4 takes the work that makes a CNC pay for itself in a furniture or sign shop: tabletops, cabinet panels, large signs and full nests of parts. No more tiling a job and sanding out the seams.
The hybrid MDF and aluminum spoilboard gives you T-slot clamping across the full bed and a sacrificial surface you can resurface, so large sheets stay flat and fixed through long cuts.

The 4x4 supports an optional dual Z-axis that carries two spindles or trim routers on the same gantry. Run two identical parts side by side to double batch output, or load two different bits so roughing and finishing happen in one job.
In dual-Z mode the work area becomes 600 × 1300 mm per head, which still fits most production parts. For a shop selling repeat products, that second head is an inexpensive way to add capacity without a second machine.

A large machine runs long jobs, and long jobs are where open-loop steppers lose steps. The 4x4 drives XY with four NEMA 23 closed-loop motors rated at 3.5 N·m that monitor their position and correct it, so a 6-hour carve finishes where it should.
Rapids of 5,000 mm/min move the gantry across the 1.3 m bed quickly, which matters more on a large machine than on a small one: on big nests, travel time between parts is a large share of the job.
Width is the enemy of rigidity, which is why the 4x4 uses HG20 guides on Y, HG15 on X and Z, and Φ20 mm ball screws on X and Y. SainSmart rates the Y guides for an equivalent load of 108 kg and the X for 168 kg.
That stiffness is what lets a machine this size cut hardwood, MDF, acrylic and aluminum cleanly. Pair it with the recommended Genmitsu 710W router for general work, or a 1.5–2.2 kW water-cooled spindle for heavier cutting.
A Wi-Fi module comes in the box, so you can run jobs from the Genmitsu App on a phone or desktop as well as from Candle, UGS or Vectric over USB. The 32-bit GRBL 1.1h controller keeps motion smooth on complex toolpaths.
Inductive and hard limit switches on every axis back each other up to prevent overtravel, and an emergency stop is within reach. On a 150 kg machine, that protection keeps a setup mistake from becoming a repair bill.
The 4x4 ships without a spindle, so you can fit the one that suits your work. Its Φ65 mm holder takes the Genmitsu 710W router that SainSmart recommends, and the machine also supports 1.5–2.2 kW water-cooled spindles for production cutting.
If you are unsure which to choose, call us at 1-833-962-5377 before you order: the right spindle depends on whether you mostly V-carve signs, cut sheet goods or machine aluminum, and we can quote the machine and spindle together.

| Specification | Details |
|---|---|
| Model | Genmitsu PROVerXL 4x4 |
| Work Area | Single Z-axis: 1300 × 1300 × 118 mm (4.27' × 4.27' × 0.39'); dual Z-axis: 600 × 1300 × 118 mm |
| Overall Dimensions | 1893 × 1842 × 617 mm (6.21' × 6.04' × 2.02') |
| Net Weight | 150 kg (330.7 lb) |
| Frame | Metal frame with MDF and aluminum hybrid spoilboard |
| Linear Guides | Y: HG20; X: HG15; Z: HG15 |
| Ball Screws | Y: Φ20 mm; X: Φ20 mm; Z: Φ12 mm |
| Stepper Motors | NEMA 23 closed-loop, 3.5 N·m (four on the XY axes) |
| Max Speed | 5,000 mm/min |
| Spindle | Not included — accepts a Φ65 mm trim router or spindle (Genmitsu 710W recommended; 1.5–2.2 kW water-cooled optional) |
| Controller | GRBL 1.1h, 32-bit MCU |
| Wireless Control | Genmitsu App via included Wi-Fi module |
| Software | GRBL-based software such as Candle and UGS; Vectric VCarve compatible |
| Safety | XYZ inductive and hard limit switches, emergency stop |
| Power Supply | AC 110/230V switching power supply |
| Spindle Holder | Φ65 mm with dust shoe |
| Dual Z-Axis | Supported (optional add-on Z-axis) |
| Warranty | 1 Year (Genmitsu manufacturer warranty) |
Warranty and support: the Genmitsu PROVerXL 4x4 is covered by Genmitsu's 1-year manufacturer warranty, valid through The Maker's Chest, and every order includes our 75-day return window. Genmitsu is SainSmart's CNC brand.
| Attribute | PROVerXL 2x2 | PROVerXL 4x4 |
|---|---|---|
| Work Area | 679 × 679 × 113 mm (2.23 × 2.23 ft) | 1300 × 1300 × 118 mm (4.27 × 4.27 ft); 600 × 1300 mm with dual Z |
| Overall Footprint | 1161 × 1142 × 617 mm | 1893 × 1842 × 617 mm |
| Net Weight | 90 kg (198.4 lb) | 150 kg (330.7 lb) |
| Spindle | 710W, 30,000 RPM included | Not included — needs a Φ65 mm trim router or spindle |
| Motion System | HG20/HG15 rails, Φ20 mm ball screws, closed-loop NEMA 23 | Same |
| Dual Z-Axis Option | No | Yes |
| Price (machine only) | $2,399 | $3,599 |
Choose the 2x2 if your largest parts are around 26" square — signs, cabinet doors, guitar bodies — and you want a machine that arrives ready to cut with its spindle.
Choose the 4x4 if you cut half sheets, furniture panels or long batches, or want a dual Z-axis to run two tools on one job.
| Option | Price | What it adds |
|---|---|---|
| Machine Only | $3,599 | The CNC frame and electronics. Use your own CAM software. |
| With Vectric VCarve Desktop | $3,899 | Vectric VCarve Desktop license — 2D/2.5D design and toolpaths, jobs up to 24" × 24" |
| With Vectric VCarve Pro | $4,299 | Vectric VCarve Pro license — unlimited job size, nesting and production toolpaths |
Choose Machine Only if you already own CAM software.
Choose VCarve Desktop if most of your jobs are 24" × 24" or smaller and you want Vectric's sign workflow.
Choose VCarve Pro if you want to use the full 4' × 4' bed — VCarve Desktop cannot toolpath a single job larger than 24" × 24".
Q: Is a spindle included with the PROVerXL 4x4?
A: No. The 4x4 ships without a spindle and accepts a Φ65 mm trim router or spindle. SainSmart recommends the Genmitsu 710W router, and the machine also supports 1.5–2.2 kW water-cooled spindles.
Q: What is the work area?
A: With a single Z-axis the work area is 1300 × 1300 × 118 mm (4.27' × 4.27'). With the optional dual Z-axis, each head covers 600 × 1300 mm.
Q: How much space does it need?
A: The machine footprint is 1893 × 1842 × 617 mm and it weighs 150 kg (330.7 lb), so plan for a sturdy table or stand and room to load sheets from the front.
Q: What is the dual Z-axis?
A: An optional second Z-axis that carries another spindle or router on the gantry, so you can cut two parts at once or run two different tools in one job.
Q: What is the difference between the 4x4 and the 2X2?
A: They share the same rails, ball screws and closed-loop motors. The 4x4 has nearly four times the cutting area and supports dual Z; the 2X2 is smaller, lighter and includes a 710W spindle.
Q: Do I need VCarve Pro?
A: If you want to cut single jobs larger than 24" × 24", yes. VCarve Desktop is limited to 24" × 24" jobs, while VCarve Pro has no job-size limit.
Q: Can I control it from my phone?
A: Yes. A Wi-Fi module is included for the Genmitsu App, and it also runs from a computer with Candle, UGS or Vectric.
Q: Is the warranty valid when I buy the Genmitsu PROVerXL 4x4 from The Maker's Chest?
A: Yes. The Genmitsu PROVerXL 4x4 carries Genmitsu's 1-year manufacturer warranty on the machine when purchased from The Maker's Chest, and we handle the claim with you rather than sending you to start from scratch with the factory.
Q: Can I return the Genmitsu PROVerXL 4x4?
A: Yes. Every Genmitsu PROVerXL 4x4 from The Maker's Chest includes our 75-day return window for machines returned complete and in like-new condition.
Q: Why buy the Genmitsu PROVerXL 4x4 from The Maker's Chest instead of direct?
A: You get the same Genmitsu machine and warranty, plus a 75-day return window, a US-based team you can call, and advice from people who sell several sizes of Genmitsu CNC and can tell you honestly which one fits your work.
| Specification | Details |
|---|---|
| Model | Genmitsu PROVerXL 4x4 |
| Work Area | Single Z-axis: 1300 × 1300 × 118 mm (4.27' × 4.27' × 0.39'); dual Z-axis: 600 × 1300 × 118 mm |
| Overall Dimensions | 1893 × 1842 × 617 mm (6.21' × 6.04' × 2.02') |
| Net Weight | 150 kg (330.7 lb) |
| Frame | Metal frame with MDF and aluminum hybrid spoilboard |
| Linear Guides | Y: HG20; X: HG15; Z: HG15 |
| Ball Screws | Y: Φ20 mm; X: Φ20 mm; Z: Φ12 mm |
| Stepper Motors | NEMA 23 closed-loop, 3.5 N·m (four on the XY axes) |
| Max Speed | 5,000 mm/min |
| Spindle | Not included — accepts a Φ65 mm trim router or spindle (Genmitsu 710W recommended; 1.5–2.2 kW water-cooled optional) |
| Controller | GRBL 1.1h, 32-bit MCU |
| Wireless Control | Genmitsu App via included Wi-Fi module |
| Software | GRBL-based software such as Candle and UGS; Vectric VCarve compatible |
| Safety | XYZ inductive and hard limit switches, emergency stop |
| Power Supply | AC 110/230V switching power supply |
| Spindle Holder | Φ65 mm with dust shoe |
| Dual Z-Axis | Supported (optional add-on Z-axis) |
| Warranty | 1 Year (Genmitsu manufacturer warranty) |
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
Shipping Insurance ($89)
Furniture makers, sign shops and luthiers hit the same wall with smaller CNCs: anything bigger than the bed has to be tiled, re-registered and pieced together. The PROVerXL 4x4 removes that limit with a 4.27' × 4.27' bed, so tabletops, chair parts, door panels and 4' signs cut in a single setup.
It uses the same motion hardware as the PROVerXL 2X2 — HG20/HG15 linear guides, Φ20 mm ball screws and closed-loop steppers — scaled up for small production shops that need capacity without an industrial price.



At 1300 × 1300 × 118 mm, the 4x4 takes the work that makes a CNC pay for itself in a furniture or sign shop: tabletops, cabinet panels, large signs and full nests of parts. No more tiling a job and sanding out the seams.
The hybrid MDF and aluminum spoilboard gives you T-slot clamping across the full bed and a sacrificial surface you can resurface, so large sheets stay flat and fixed through long cuts.

The 4x4 supports an optional dual Z-axis that carries two spindles or trim routers on the same gantry. Run two identical parts side by side to double batch output, or load two different bits so roughing and finishing happen in one job.
In dual-Z mode the work area becomes 600 × 1300 mm per head, which still fits most production parts. For a shop selling repeat products, that second head is an inexpensive way to add capacity without a second machine.

A large machine runs long jobs, and long jobs are where open-loop steppers lose steps. The 4x4 drives XY with four NEMA 23 closed-loop motors rated at 3.5 N·m that monitor their position and correct it, so a 6-hour carve finishes where it should.
Rapids of 5,000 mm/min move the gantry across the 1.3 m bed quickly, which matters more on a large machine than on a small one: on big nests, travel time between parts is a large share of the job.
Width is the enemy of rigidity, which is why the 4x4 uses HG20 guides on Y, HG15 on X and Z, and Φ20 mm ball screws on X and Y. SainSmart rates the Y guides for an equivalent load of 108 kg and the X for 168 kg.
That stiffness is what lets a machine this size cut hardwood, MDF, acrylic and aluminum cleanly. Pair it with the recommended Genmitsu 710W router for general work, or a 1.5–2.2 kW water-cooled spindle for heavier cutting.
A Wi-Fi module comes in the box, so you can run jobs from the Genmitsu App on a phone or desktop as well as from Candle, UGS or Vectric over USB. The 32-bit GRBL 1.1h controller keeps motion smooth on complex toolpaths.
Inductive and hard limit switches on every axis back each other up to prevent overtravel, and an emergency stop is within reach. On a 150 kg machine, that protection keeps a setup mistake from becoming a repair bill.
The 4x4 ships without a spindle, so you can fit the one that suits your work. Its Φ65 mm holder takes the Genmitsu 710W router that SainSmart recommends, and the machine also supports 1.5–2.2 kW water-cooled spindles for production cutting.
If you are unsure which to choose, call us at 1-833-962-5377 before you order: the right spindle depends on whether you mostly V-carve signs, cut sheet goods or machine aluminum, and we can quote the machine and spindle together.

| Specification | Details |
|---|---|
| Model | Genmitsu PROVerXL 4x4 |
| Work Area | Single Z-axis: 1300 × 1300 × 118 mm (4.27' × 4.27' × 0.39'); dual Z-axis: 600 × 1300 × 118 mm |
| Overall Dimensions | 1893 × 1842 × 617 mm (6.21' × 6.04' × 2.02') |
| Net Weight | 150 kg (330.7 lb) |
| Frame | Metal frame with MDF and aluminum hybrid spoilboard |
| Linear Guides | Y: HG20; X: HG15; Z: HG15 |
| Ball Screws | Y: Φ20 mm; X: Φ20 mm; Z: Φ12 mm |
| Stepper Motors | NEMA 23 closed-loop, 3.5 N·m (four on the XY axes) |
| Max Speed | 5,000 mm/min |
| Spindle | Not included — accepts a Φ65 mm trim router or spindle (Genmitsu 710W recommended; 1.5–2.2 kW water-cooled optional) |
| Controller | GRBL 1.1h, 32-bit MCU |
| Wireless Control | Genmitsu App via included Wi-Fi module |
| Software | GRBL-based software such as Candle and UGS; Vectric VCarve compatible |
| Safety | XYZ inductive and hard limit switches, emergency stop |
| Power Supply | AC 110/230V switching power supply |
| Spindle Holder | Φ65 mm with dust shoe |
| Dual Z-Axis | Supported (optional add-on Z-axis) |
| Warranty | 1 Year (Genmitsu manufacturer warranty) |
Warranty and support: the Genmitsu PROVerXL 4x4 is covered by Genmitsu's 1-year manufacturer warranty, valid through The Maker's Chest, and every order includes our 75-day return window. Genmitsu is SainSmart's CNC brand.
| Attribute | PROVerXL 2x2 | PROVerXL 4x4 |
|---|---|---|
| Work Area | 679 × 679 × 113 mm (2.23 × 2.23 ft) | 1300 × 1300 × 118 mm (4.27 × 4.27 ft); 600 × 1300 mm with dual Z |
| Overall Footprint | 1161 × 1142 × 617 mm | 1893 × 1842 × 617 mm |
| Net Weight | 90 kg (198.4 lb) | 150 kg (330.7 lb) |
| Spindle | 710W, 30,000 RPM included | Not included — needs a Φ65 mm trim router or spindle |
| Motion System | HG20/HG15 rails, Φ20 mm ball screws, closed-loop NEMA 23 | Same |
| Dual Z-Axis Option | No | Yes |
| Price (machine only) | $2,399 | $3,599 |
Choose the 2x2 if your largest parts are around 26" square — signs, cabinet doors, guitar bodies — and you want a machine that arrives ready to cut with its spindle.
Choose the 4x4 if you cut half sheets, furniture panels or long batches, or want a dual Z-axis to run two tools on one job.
| Option | Price | What it adds |
|---|---|---|
| Machine Only | $3,599 | The CNC frame and electronics. Use your own CAM software. |
| With Vectric VCarve Desktop | $3,899 | Vectric VCarve Desktop license — 2D/2.5D design and toolpaths, jobs up to 24" × 24" |
| With Vectric VCarve Pro | $4,299 | Vectric VCarve Pro license — unlimited job size, nesting and production toolpaths |
Choose Machine Only if you already own CAM software.
Choose VCarve Desktop if most of your jobs are 24" × 24" or smaller and you want Vectric's sign workflow.
Choose VCarve Pro if you want to use the full 4' × 4' bed — VCarve Desktop cannot toolpath a single job larger than 24" × 24".
Q: Is a spindle included with the PROVerXL 4x4?
A: No. The 4x4 ships without a spindle and accepts a Φ65 mm trim router or spindle. SainSmart recommends the Genmitsu 710W router, and the machine also supports 1.5–2.2 kW water-cooled spindles.
Q: What is the work area?
A: With a single Z-axis the work area is 1300 × 1300 × 118 mm (4.27' × 4.27'). With the optional dual Z-axis, each head covers 600 × 1300 mm.
Q: How much space does it need?
A: The machine footprint is 1893 × 1842 × 617 mm and it weighs 150 kg (330.7 lb), so plan for a sturdy table or stand and room to load sheets from the front.
Q: What is the dual Z-axis?
A: An optional second Z-axis that carries another spindle or router on the gantry, so you can cut two parts at once or run two different tools in one job.
Q: What is the difference between the 4x4 and the 2X2?
A: They share the same rails, ball screws and closed-loop motors. The 4x4 has nearly four times the cutting area and supports dual Z; the 2X2 is smaller, lighter and includes a 710W spindle.
Q: Do I need VCarve Pro?
A: If you want to cut single jobs larger than 24" × 24", yes. VCarve Desktop is limited to 24" × 24" jobs, while VCarve Pro has no job-size limit.
Q: Can I control it from my phone?
A: Yes. A Wi-Fi module is included for the Genmitsu App, and it also runs from a computer with Candle, UGS or Vectric.
Q: Is the warranty valid when I buy the Genmitsu PROVerXL 4x4 from The Maker's Chest?
A: Yes. The Genmitsu PROVerXL 4x4 carries Genmitsu's 1-year manufacturer warranty on the machine when purchased from The Maker's Chest, and we handle the claim with you rather than sending you to start from scratch with the factory.
Q: Can I return the Genmitsu PROVerXL 4x4?
A: Yes. Every Genmitsu PROVerXL 4x4 from The Maker's Chest includes our 75-day return window for machines returned complete and in like-new condition.
Q: Why buy the Genmitsu PROVerXL 4x4 from The Maker's Chest instead of direct?
A: You get the same Genmitsu machine and warranty, plus a 75-day return window, a US-based team you can call, and advice from people who sell several sizes of Genmitsu CNC and can tell you honestly which one fits your work.
| Specification | Details |
|---|---|
| Model | Genmitsu PROVerXL 4x4 |
| Work Area | Single Z-axis: 1300 × 1300 × 118 mm (4.27' × 4.27' × 0.39'); dual Z-axis: 600 × 1300 × 118 mm |
| Overall Dimensions | 1893 × 1842 × 617 mm (6.21' × 6.04' × 2.02') |
| Net Weight | 150 kg (330.7 lb) |
| Frame | Metal frame with MDF and aluminum hybrid spoilboard |
| Linear Guides | Y: HG20; X: HG15; Z: HG15 |
| Ball Screws | Y: Φ20 mm; X: Φ20 mm; Z: Φ12 mm |
| Stepper Motors | NEMA 23 closed-loop, 3.5 N·m (four on the XY axes) |
| Max Speed | 5,000 mm/min |
| Spindle | Not included — accepts a Φ65 mm trim router or spindle (Genmitsu 710W recommended; 1.5–2.2 kW water-cooled optional) |
| Controller | GRBL 1.1h, 32-bit MCU |
| Wireless Control | Genmitsu App via included Wi-Fi module |
| Software | GRBL-based software such as Candle and UGS; Vectric VCarve compatible |
| Safety | XYZ inductive and hard limit switches, emergency stop |
| Power Supply | AC 110/230V switching power supply |
| Spindle Holder | Φ65 mm with dust shoe |
| Dual Z-Axis | Supported (optional add-on Z-axis) |
| Warranty | 1 Year (Genmitsu manufacturer warranty) |
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
placeholder