Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content

Filters

Laser Paint Removal Machines

Need to strip paint without chemical strippers, sanding discs, or blast media? A laser paint remover vaporizes coatings with short bursts of fiber laser light, so you can take off a top coat and stop at the primer or go all the way to bare metal on the same machine. Pulsed laser paint strippers remove paint from car panels, wheels, aluminum, and even wood without warping, scorching, or roughening the surface.

At The Maker's Chest, we carry laser paint removal machines from 100W pulsed units for detail work to 6,000W continuous-wave systems for steel structures. A 1,500W continuous laser paint removal tool is rated at about 14 square meters per hour on 200-micron paint. Because there is no media, solvent, or sludge to dispose of, a laser paint stripper for sale here is a long-term upgrade for refinishing and restoration shops, backed by our team's help choosing pulse energy.

Find the Laser Paint Remover That Fits Your Coatings

Frequently Asked Questions

Can a laser remove paint without damaging the metal?

Yes, when the settings match the coating. Paint absorbs the laser energy and vaporizes, while bare steel and aluminum reflect much of it once they are exposed. A pulsed laser keeps heat out of the part, which is why it is the safer choice on thin panels, aluminum, and finished surfaces. Continuous-wave lasers strip paint faster on thick steel but can heat and warp thin sheet if the beam lingers.

Can a laser paint stripper remove car paint?

Yes. Pulsed laser paint strippers in the 200W to 500W range are widely used on car panels, wheels, and restoration parts because they remove paint and primer without warping thin body steel. You can stop at the primer or strip to bare metal by adjusting power and passes. For a full vehicle, laser stripping is slower than media blasting, so many shops use it for panels, edges, and detail areas where precision matters most.

How many watts do I need for laser paint removal?

For thin automotive or industrial paint on small parts, 200W to 300W pulsed is the usual starting point; 500W pulsed is roughly three times faster than 200W. For thick coatings on structural steel, a 1,500W to 3,000W continuous-wave machine strips paint far faster per dollar. Coating thickness matters as much as power: a 1,500W unit clears about 14 square meters per hour of 200-micron paint but only about 2 square meters per hour at 1,000 microns.

Will a laser paint remover work on powder coat and epoxy?

Yes. Fiber lasers remove powder coat, epoxy, and multi-layer industrial coatings, which are some of the hardest finishes to strip with chemicals. Thick, rubbery coatings take more passes than paint because they absorb heat before they ablate, so a higher-power or higher pulse-energy machine pays off if powder coat is your main job. Always test a sample part first to set speed and power.

Is laser paint stripping safe for lead paint?

A laser can remove lead paint, but it vaporizes the lead into fume, so it must be done with proper fume extraction and respiratory protection. Lead paint removal is regulated work in the U.S., and contractors working on pre-1978 homes need EPA RRP certification. For industrial lead coatings, pair the laser with a HEPA-filtered fume extractor and follow OSHA's lead standard.

Skip the AI. Call an Expert. Skip the AI. Call an Expert.