MCWlaser B Series B2000 2000W Water-Cooled CW Laser Cleaner
By MCWlaser
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
By MCWlaser
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Unlock Discount
Large steel parts can tie up a preparation bay when rust and old coatings have to come off repeatedly. The B2000 gives that bay a continuous-wave Raycus source and a water-cooled cabinet for evaluating repeat work on broader surfaces.
If you are comparing the B2000 with the air-cooled R2000A, both are rated at 2,000 W. Compare coolant service, cabinet placement, and receiving requirements before deciding which fits your bay.

The B2000 uses a 2,000 W Raycus continuous-wave source for non-contact cleaning of robust metal surfaces. It fits a shop evaluating recurring rust or coating removal on steel frames, brackets, and similar parts. Time a representative job from loading through inspection and compare it with your current preparation process before sizing the station.

MCWlaser lists 10–300 mm scan width and 50–200 Hz scan frequency for the B2000. Those controls give a shop a way to account for both wide faces and constrained features on the same assembly. The acceptable production rate depends on the layer being removed and the finish required, so assess both on representative pieces.
The water-cooled cabinet moves heat away from the source through a coolant loop that uses purified or distilled water per MCWlaser. Compared with the air-cooled R2000A, this adds coolant service and access around the cabinet. A dedicated bay makes it easier to reserve room for those checks alongside extraction and workholding.
The 10 m standard fiber lead gives an operator room to work across a fixture while the water-cooled cabinet stays parked. The usable distance depends on the route around barriers, the cabinet, and the part. Mark the actual path in the bay and account for turns around large workpieces before finalizing fixture placement.

MCWlaser lists 220 V single-phase input for the B2000. The larger B3000 has a different published supply requirement, so check power before using one machine as a drop-in alternative for the other. Have a qualified electrician confirm the ordered unit’s nameplate, phase, and connection, along with the loads for auxiliary equipment.
The listed 210 kg machine weight makes receiving the B2000 a different job from moving a trolley-case pulsed cleaner. The cabinet casters help with positioning once it is on the shop floor. Check unloading equipment, doorway and turning clearances, and service access before the unit ships.

| Specification | Value |
|---|---|
| Model | B2000 |
| Nominal output | 2,000 W |
| Laser source | Raycus continuous-wave fiber |
| Cooling | Water cooled |
| Input voltage | 220 V AC, single phase |
| Fiber cable | 10 m standard |
| Laser wavelength | 1,080 nm |
| Machine weight | 210 kg |
| Scan width | 10–300 mm |
| Scan frequency | 50–200 Hz |
| Output adjustment | 10–100% |
| Operating temperature | 5–45 °C |
| Coolant | Purified or distilled water |
MCWlaser’s published warranty lists 2 Years for the fiber laser source and 1 Year for other covered accessories. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.
| Attribute | B2000 | B3000 |
|---|---|---|
| Nominal output | 2,000 W | 3,000 W |
| Input voltage | 220 V AC, single phase | 380 V AC ±10% per manufacturer |
| Fiber cable | 10 m standard | 10 m or 20 m |
Choose the B2000 if a 2,000 W water-cooled machine and the listed 220 V single-phase supply fit your bay.
Q: What is this cleaner designed to remove?
A: Use it to evaluate removal of rust and coatings on steel parts. Qualify the process on a representative sample before treating production parts.
Q: How does pulsed cleaning compare with continuous-wave cleaning?
A: A pulsed source delivers energy in bursts, which gives the operator another way to manage heat input. Continuous-wave output is commonly considered for bigger, repeat surface preparation jobs. Compare the two on the workpiece and finish you need.
Q: What electrical service does it need?
A: The manufacturer lists 220 V single phase. Check the exact configuration and delivered nameplate with MCWlaser and a qualified electrician.
Q: Does the B2000 need a chiller?
A: The cabinet is water cooled and the supplier lists purified or distilled water. Plan cooling service and clearance at the station.
Q: How long is the fiber lead?
A: MCWlaser lists 10 m standard. Plan the lead path and working reach inside your controlled cleaning area.
Q: Can I clean thin or finished parts?
A: Establish the result on your actual substrate and finish. Even within one material family, contamination and acceptable change to the surface can differ.
Q: What safety setup does a handheld laser require?
A: Plan a laser-controlled work area with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify wavelength-rated protection for everyone in the area.
Q: What does MCWlaser’s warranty cover?
A: MCWlaser’s published warranty lists 2 Years for the fiber laser source and 1 Year for other covered accessories. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.
Q: How should I plan freight for this machine?
A: Confirm a freight quote and receiving requirements for your destination before ordering. Where available, compare air and sea freight for the delivery schedule and total delivered cost.
Q: Why buy this cleaner from The Maker’s Chest?
A: We can help compare air-cooled and water-cooled options and review your workpiece, facility and intended use before you order.
| Specification | Value |
|---|---|
| Model | B2000 |
| Nominal output | 2,000 W |
| Laser source | Raycus continuous-wave fiber |
| Cooling | Water cooled |
| Input voltage | 220 V AC, single phase |
| Fiber cable | 10 m standard |
| Laser wavelength | 1,080 nm |
| Machine weight | 210 kg |
| Scan width | 10–300 mm |
| Scan frequency | 50–200 Hz |
| Output adjustment | 10–100% |
| Operating temperature | 5–45 °C |
| Coolant | Purified or distilled water |
MCWlaser’s published warranty lists 2 Years for the fiber laser source and 1 Year for other covered accessories. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
Shipping Insurance ($89)
placeholder
Large steel parts can tie up a preparation bay when rust and old coatings have to come off repeatedly. The B2000 gives that bay a continuous-wave Raycus source and a water-cooled cabinet for evaluating repeat work on broader surfaces.
If you are comparing the B2000 with the air-cooled R2000A, both are rated at 2,000 W. Compare coolant service, cabinet placement, and receiving requirements before deciding which fits your bay.

The B2000 uses a 2,000 W Raycus continuous-wave source for non-contact cleaning of robust metal surfaces. It fits a shop evaluating recurring rust or coating removal on steel frames, brackets, and similar parts. Time a representative job from loading through inspection and compare it with your current preparation process before sizing the station.

MCWlaser lists 10–300 mm scan width and 50–200 Hz scan frequency for the B2000. Those controls give a shop a way to account for both wide faces and constrained features on the same assembly. The acceptable production rate depends on the layer being removed and the finish required, so assess both on representative pieces.
The water-cooled cabinet moves heat away from the source through a coolant loop that uses purified or distilled water per MCWlaser. Compared with the air-cooled R2000A, this adds coolant service and access around the cabinet. A dedicated bay makes it easier to reserve room for those checks alongside extraction and workholding.
The 10 m standard fiber lead gives an operator room to work across a fixture while the water-cooled cabinet stays parked. The usable distance depends on the route around barriers, the cabinet, and the part. Mark the actual path in the bay and account for turns around large workpieces before finalizing fixture placement.

MCWlaser lists 220 V single-phase input for the B2000. The larger B3000 has a different published supply requirement, so check power before using one machine as a drop-in alternative for the other. Have a qualified electrician confirm the ordered unit’s nameplate, phase, and connection, along with the loads for auxiliary equipment.
The listed 210 kg machine weight makes receiving the B2000 a different job from moving a trolley-case pulsed cleaner. The cabinet casters help with positioning once it is on the shop floor. Check unloading equipment, doorway and turning clearances, and service access before the unit ships.

| Specification | Value |
|---|---|
| Model | B2000 |
| Nominal output | 2,000 W |
| Laser source | Raycus continuous-wave fiber |
| Cooling | Water cooled |
| Input voltage | 220 V AC, single phase |
| Fiber cable | 10 m standard |
| Laser wavelength | 1,080 nm |
| Machine weight | 210 kg |
| Scan width | 10–300 mm |
| Scan frequency | 50–200 Hz |
| Output adjustment | 10–100% |
| Operating temperature | 5–45 °C |
| Coolant | Purified or distilled water |
MCWlaser’s published warranty lists 2 Years for the fiber laser source and 1 Year for other covered accessories. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.
| Attribute | B2000 | B3000 |
|---|---|---|
| Nominal output | 2,000 W | 3,000 W |
| Input voltage | 220 V AC, single phase | 380 V AC ±10% per manufacturer |
| Fiber cable | 10 m standard | 10 m or 20 m |
Choose the B2000 if a 2,000 W water-cooled machine and the listed 220 V single-phase supply fit your bay.
Q: What is this cleaner designed to remove?
A: Use it to evaluate removal of rust and coatings on steel parts. Qualify the process on a representative sample before treating production parts.
Q: How does pulsed cleaning compare with continuous-wave cleaning?
A: A pulsed source delivers energy in bursts, which gives the operator another way to manage heat input. Continuous-wave output is commonly considered for bigger, repeat surface preparation jobs. Compare the two on the workpiece and finish you need.
Q: What electrical service does it need?
A: The manufacturer lists 220 V single phase. Check the exact configuration and delivered nameplate with MCWlaser and a qualified electrician.
Q: Does the B2000 need a chiller?
A: The cabinet is water cooled and the supplier lists purified or distilled water. Plan cooling service and clearance at the station.
Q: How long is the fiber lead?
A: MCWlaser lists 10 m standard. Plan the lead path and working reach inside your controlled cleaning area.
Q: Can I clean thin or finished parts?
A: Establish the result on your actual substrate and finish. Even within one material family, contamination and acceptable change to the surface can differ.
Q: What safety setup does a handheld laser require?
A: Plan a laser-controlled work area with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify wavelength-rated protection for everyone in the area.
Q: What does MCWlaser’s warranty cover?
A: MCWlaser’s published warranty lists 2 Years for the fiber laser source and 1 Year for other covered accessories. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.
Q: How should I plan freight for this machine?
A: Confirm a freight quote and receiving requirements for your destination before ordering. Where available, compare air and sea freight for the delivery schedule and total delivered cost.
Q: Why buy this cleaner from The Maker’s Chest?
A: We can help compare air-cooled and water-cooled options and review your workpiece, facility and intended use before you order.
| Specification | Value |
|---|---|
| Model | B2000 |
| Nominal output | 2,000 W |
| Laser source | Raycus continuous-wave fiber |
| Cooling | Water cooled |
| Input voltage | 220 V AC, single phase |
| Fiber cable | 10 m standard |
| Laser wavelength | 1,080 nm |
| Machine weight | 210 kg |
| Scan width | 10–300 mm |
| Scan frequency | 50–200 Hz |
| Output adjustment | 10–100% |
| Operating temperature | 5–45 °C |
| Coolant | Purified or distilled water |
MCWlaser’s published warranty lists 2 Years for the fiber laser source and 1 Year for other covered accessories. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if: