xTool MetalFab Laser Welder

Weld, Cut, Clean and Engrave Metal With One Machine, and Stop Outsourcing the Work

A handheld fiber laser welder that docks into a CNC cutting bed. Available in 800W and 1200W, built for fab shops, makers and small manufacturers who want industrial results without an industrial footprint.

Most metal shops need a MIG or TIG welder, a separate plasma or laser cutter, and a grinder for cleanup, plus the floor space to house all of it. The xTool MetalFab laser welder and CNC cutter replaces that stack with one compact, camera-guided system. Whether you run a small fabrication business, build custom automotive parts or prototype new products, it delivers professional-grade welds and cuts at a fraction of the cost of industrial equipment.

Pricing starts at $4,499 for the 800W welder, and you can add the CNC cutter and a SafetyPro air purifier when your shop is ready. Every unit is sold by an authorized reseller with 75-day returns and US-based support from The Maker's Chest.

Bring Welding, Cutting, Cleaning and Engraving In-House, With One System

The fiber laser head detaches from the CNC cutting bed in seconds and becomes a handheld welding and cleaning gun. One machine gives you four capabilities:

CNC Laser Cutting: up to 10mm carbon steel burr-free (1200W) with ±0.1mm precision at speeds up to 400mm/s

Laser Welding: clean, deep welds from 0.2mm sheet up to 5mm stainless and carbon steel (1200W)

Rust and Paint Removal: up to 45mm cleaning width with the MaxClean accessory, about 3x wider than typical handheld laser cleaners

Laser Engraving: detailed surface marking on stainless steel, carbon steel and anodized aluminum

When you finish cutting, the same head becomes your welder. When you finish welding, it cleans the seam. One workflow, raw stock to finished part.

Get Strong, Clean Welds With Less Distortion and Less Rework

The MetalFab uses industrial-grade Coherent fiber laser chips, the class of component found in much more expensive machines. The result is consistent, deep-penetration welds with a minimal heat-affected zone, so thin sheet and aluminum stay flat instead of warping.

Maximum single-side weld depth (1200W): stainless steel 5mm, carbon steel 5mm, galvanized sheet 5mm, titanium 5mm, aluminum 4mm, brass 4mm, and ultra-thin metal from 0.2mm. The 800W reaches 4mm on stainless, carbon and galvanized steel and 3mm on aluminum and brass.

Laser lifespan is rated at 10,000+ hours, with thermal management built for continuous 24/7 operation.

Zero Learning Curve: First Weld in Hours, Not Months

Forget unstable arcs and the steep learning curve of TIG. The 8-inch smart touchscreen ships with 108+ one-click material presets. Pick your material and thickness and the machine sets the rest.

Automatic wire feeding keeps a steady feed rate while you guide the torch

Ultra-lightweight welding torch (about 550g) with integrated wire-feed control and grip sensing

Quick-release head swap between welding, cutting and cleaning tips

Dual smart cameras handle material recognition and cutting layout automatically

Cut Faster and Spend Less on Gas

VibeFreeCut™ suppresses vibration for smooth, burr-free edges with no secondary grinding.

FlexiTrack™ keeps the laser aligned even on warped or uneven stock.

SaveGas™ cuts shielding-gas use by up to 50% versus conventional setups, with burr-free 4mm stainless cuts at just 87 PSI.

The dual camera system (16MP panoramic plus close-range) drives AI nesting for up to 98.7% material utilization, so you get more parts per sheet and less scrap.

Clean Rust and Finish Welds Without Switching Tools

The optional MaxClean accessory covers up to 45mm per pass, so rust removal, paint stripping and oxide cleaning go much faster. After welding, switch to post-weld cleaning mode (up to 10mm width) for bright, clean seams without grinding or wire brushing, all on the same laser head.

Add the CNC Cutter and Let Parts Cut Themselves

The MetalFab laser welder stands on its own as a handheld system. When volume grows, the MetalFab CNC Cutter (610 x 610mm bed, unlimited pass-through length) connects to the same fiber laser head and adds:

Automated precision cutting at ±0.1mm accuracy and up to 400mm/s

Up to 10mm carbon steel burr-free with the 1200W welder (8mm with the 800W)

Camera-based smart nesting for maximum material yield

Pass-through loading for workpieces longer than the bed

Note that the cutter requires a MetalFab welder to operate, since it shares the welder's laser head. If you already own a welder, choose the Cutter (Welder Needed) option.

Run It All Day With Shop-Safe Protection Built In

10,000+ hour laser life with industrial thermal management for continuous operation

Operates from -10°C to 40°C, so cold garages and hot shops are fine

10 layered safety features including contact-activated emission prevention to stop accidental firing

SafetyPro AP2 Max air purifier available as part of the SafetyPro Bundle to capture weld and cut fumes at the source

How MetalFab Compares

The MetalFab competes with industrial machines that cost 3 to 5 times as much, and wins on versatility, ease of use and total cost of ownership.

Pick the Power That Matches Your Metal Thickness

Choose the 800W if you mainly work with sheet and light fabrication up to 4mm and want a lower entry price and a lighter machine. Choose the 1200W if you routinely weld 5mm material, cut 10mm carbon steel or run higher-volume production.

What's Included in Each Package

Welder: the MetalFab laser welder in your chosen power (800W or 1200W).

Welder + Cutter: the welder plus the MetalFab CNC Cutter (610 x 610mm bed).

SafetyPro Bundle: the welder, the CNC cutter and the SafetyPro AP2 Max air purifier.

Cutter (Welder Needed): the CNC cutter alone, for owners who already have a MetalFab welder.

Refer to the bundle image on each option for the exact accessories shipped with that package.

The Maker's Chest Difference

You can buy the MetalFab from several sellers, including xTool directly. Here is why buyers choose The Maker's Chest:

75-day returns. Test the MetalFab on your own material and production, with real time to decide.

Two lines of support. Our US-based team and xTool's own support network are both behind your machine.

Real experts, not a script. Ask about cut parameters, gas pressure or a specific alloy and talk to someone who knows these machines.

Honest pre-sale guidance. We will tell you if 800W is enough or if you need the 1200W, and whether your shop's power and ventilation are ready.

Authorized reseller. Your machine carries xTool's 1-year manufacturer warranty, and we help you through any claim.

Frequently Asked Questions

What metals can the xTool MetalFab weld and cut?

It works with stainless steel, aluminum alloys, carbon steel, titanium, brass, galvanized sheet and other common fabrication metals. Exact thickness limits depend on whether you choose the 800W or 1200W. On the 1200W, single-side weld depth reaches 5mm on stainless, carbon steel, galvanized sheet and titanium, and 4mm on aluminum and brass. The 800W reaches 4mm on stainless, carbon and galvanized steel, and 3mm on aluminum and brass. Both weld thin sheet from 0.2mm. See the comparison table above for cutting limits.

Do I need welding experience?

No. The 108+ one-click presets, 8-inch touchscreen and automatic wire feeder mean most beginners produce clean, strong welds within their first sessions. You pick the material and thickness and the machine sets the parameters, and the torch weighs about 550g, so it is easy to hold steady. Joint fit-up and clean material still matter, as with any welding, and we are happy to talk through your first parts with you.

What power does the MetalFab require?

The 1200W needs a 200 to 240V circuit rated 21A or higher (max 4200W draw). The 800W needs 200 to 240V at 15A or higher (max 3000W). Standard 120V outlets are not sufficient, so have a licensed electrician confirm a dedicated 220V circuit before it arrives. The CNC cutter has its own 250W supply (100 to 240V, max 2.5A), which is a much lighter load. Tell us your shop's electrical setup and we will say whether it is ready.

What is the difference between the 800W and 1200W models?

The 1200W welds up to 5mm stainless and carbon steel, cuts up to 10mm carbon steel burr-free and can cut up to 12mm with burrs. The 800W handles up to 4mm welds and 8mm carbon steel burr-free. The 1200W is also a little heavier (38.2 kg against 35 kg) and draws more current. For most small shops working with sheet and light fabrication, the 800W is plenty. Choose the 1200W if you routinely weld 5mm material, cut thicker steel or run heavier production.

Is the CNC cutter included with the welder?

Only in the Welder + Cutter and SafetyPro Bundle options. The cutter shares the welder's laser head, so it cannot run without a MetalFab welder. The cutter bed is 610 x 610mm with unlimited pass-through length, so longer pieces can feed through. If you already own the welder and want to add cutting later, choose the Cutter (Welder Needed) option.

What shielding gas do I need, and what does it cost to run?

Use 99.99% nitrogen or argon. The SaveGas™ system reduces consumption by up to 50% versus conventional setups, and burr-free 4mm stainless cuts run at just 87 PSI. Actual running cost depends on your gas supplier, cylinder size and how much you cut and weld, so ask a local gas supplier for pricing on your volume.

Does the MetalFab need ventilation?

Yes. Laser welding and cutting produce metal fumes and particulates. Duct fumes outdoors or use a certified fume extraction system. The SafetyPro Bundle includes the SafetyPro AP2 Max air purifier for this purpose, which captures weld and cut fumes at the source. Do not run the machine in a closed room without extraction.

Can it cut wood, acrylic or other non-metals?

No. The MetalFab is designed for metals. It is not recommended for highly reflective metals such as copper or silver in engraving mode, and it is not meant for wood or acrylic. For wood, acrylic, leather and similar materials, a CO2 or diode laser is the right tool, and we can recommend one.

Is it safe to use in a shop?

It is a Class 4 laser with 10 layered safety features, including contact-activated emission prevention, which stops the laser firing unless the torch is in contact with the workpiece. Laser safety eyewear rated for 1080nm is required during operation for the operator and anyone nearby, and you should follow xTool's ventilation and operating guidance. If the machine will be used in a shared or commercial space, talk to us about the safety procedures you should document.

How big and heavy is it, and what space do I need?

The welder measures 632 x 304 x 472 mm and weighs 35 kg (800W), or 728 x 327 x 512 mm and 38.2 kg (1200W). The CNC cutter is much larger at 1175 x 1157 x 1230 mm and 158 kg, so plan the floor space and the delivery before it arrives. The welder runs from -10°C to 40°C, so an unheated garage or a hot shop are both fine.

What is The Maker's Chest return policy on the MetalFab?

We offer 75-day returns on xTool products. Return the machine in like-new condition within 75 days of the ship date for a full refund, less shipping and handling. That gives you time to test it on your own materials and production before you commit. Contact our support team to start a return.

What support do I get after buying from The Maker's Chest?

Dual-line support: our US-based team plus xTool's own support network, covering setup, parameter tuning, material questions and troubleshooting. Ask us about a specific alloy, thickness or joint and you will talk to someone who knows these machines, not a script.

What warranty does the MetalFab carry?

xTool provides a 1-year manufacturer warranty on the laser welder and CNC cutter, and buying from The Maker's Chest as an authorized reseller keeps it identical to buying direct. Consumables and shipping are excluded. We help you through any claim. See the Warranty tab for details.

xTool MetalFab Technical Specifications

xTool MetalFab Warranty Details:

• 1-year manufacturer warranty provided by xTool on the laser welder and CNC cutter
• 75-day money-back guarantee from The Maker's Chest
• Dual-line US support from The Maker's Chest and xTool