MCWlaser Laser Cleaners

Pulsed or continuous wave? With an MCWlaser laser cleaner, you choose the technology that fits the surface instead of forcing one machine onto every job. The MC-LG pulsed series (200–500 W) pairs JPT MOPA sources with a 30,000 mm/s dual-axis scan head for rust, oxide, and coating removal where the finish underneath has to survive. All three plug into 110–240 V power and roll on air-cooled trolley cases weighing 28–32 kg.

For heavy rust, mill scale, and paint on robust steel, MCWlaser's continuous-wave line runs Raycus sources from 1,500 W to 3,000 W. The air-cooled R1500A and R2000A fit that power into a 697 × 360 × 532 mm cabinet with no chiller to fill, service, or winterize, while the water-cooled B2000 and B3000 suit dedicated cleaning bays. At The Maker's Chest, every MCW laser cleaning machine for sale comes with expert guidance on matching laser rust removal power to your parts.

Which MCWlaser Laser Cleaner Is Right for Your Surfaces?

Sort by

View as

This collection is empty

View all products

Should I buy a pulsed or continuous wave laser cleaner?

Buy pulsed when the surface underneath matters, and continuous wave when speed on heavy contamination matters more. Pulsed systems like the MC-LG series deliver energy in short bursts, which limits heat spread on thin sheet, polished parts, molds, and anything you can't replace. CW machines like the R and B Series clean far faster on rust and scale across large steel surfaces, but they put more heat into the part. If damaging the substrate would cost you the part, choose pulsed.

What's the difference between the MCWlaser MC-LG200, MC-LG300, and MC-LG500?

The main differences are output power, controls, and frequency range. The MC-LG200 is the 200 W entry model in a 28 kg case, and the MC-LG300 adds 300 W and a separate smart screen for stored job recipes. The MC-LG500 delivers 500 W with the series' widest 1–4,000 kHz repetition range, compared with 1–3,000 kHz on the other two. All three use a 30,000 mm/s dual-axis head with nine scan patterns and up to 160 mm of width on the standard lens, extendable to 300 mm with optional lenses.

Do I need a water-cooled laser cleaner, or is air-cooled enough?

For most shops up to 2,000 W, air cooling is enough. The R2000A is the most power MCWlaser offers without a water loop, and like the R1500A it only needs clear airflow and an ambient temperature between 0 and 38 °C. The water-cooled B2000 and B3000 call for purified or distilled water, routine coolant service, and room around the cabinet. Choose the B Series when you want 3,000 W or a 20 m fiber cable for large assemblies and fixed equipment.

Filters