Bodor Laser Welders

Which cooling system belongs in your welding bay — fan, refrigerant, or water? That's the real decision behind a Bodor handheld laser welder. All three models are continuous-wave fiber laser welding machines from Bodor, which has led global fiber laser cutting sales six years running. The air-cooled Air 1200 delivers 1,200 W and up to 4 mm of Bodor-reported penetration from a 530 × 380 mm base — production-grade welds from a compact station.

The Pro 1500 steps up to 1,500 W with refrigerant cooling rated from −20 to 60 °C and a 10 m fiber cable, so a hot shop floor won't cut your shift short. For thicker joints, the Aqu 3000 is Bodor's water-cooled laser welder, reaching up to 8 mm of penetration at 3,000 W. At The Maker's Chest, we help you compare Bodor laser welders for sale against your actual material, joint design, and facility power before you commit to a machine.

Which Bodor Handheld Laser Welder Fits Your Welding Bay?

Sort by

View as

This collection is empty

View all products

What's the difference between the Bodor Air 1200, Pro 1500, and Aqu 3000?

The three models differ in output, cooling, and reach. The Air 1200 runs 1,200 W with fan-assisted cooling, a 5 m fiber cable, and up to 4 mm of Bodor-reported penetration from a compact 530 × 380 mm base. The Pro 1500 steps up to 1,500 W with refrigerant cooling and a 10 m cable for working around larger fixtures. The Aqu 3000 delivers 3,000 W through a water chiller with up to 8 mm of penetration, making it the fit for thicker joints and dedicated welding stations.

Is an air-cooled, refrigerant-cooled, or water-cooled laser welder better?

Air cooling suits compact, mobile stations, refrigerant cooling suits shops that run hot, and water cooling suits the highest power and longest duty cycles. Air-cooled handheld welders generally top out around 1,500 W because of heat management. Bodor's refrigerant-cooled Pro 1500 is rated from −20 to 60 °C ambient, a higher upper limit than the Air 1200, while the water-cooled Aqu 3000 adds a chiller loop that needs distilled water, service access, and freeze protection in unheated buildings. Match the cooling to your shop's temperature and duty cycle, not just the wattage.

Can a 1200W handheld laser welder weld 4 mm steel?

Yes. In Bodor's own testing, the Air 1200 achieved single-pass full penetration on 4 mm carbon steel. Treat that as a screening figure rather than a guarantee, because fit-up, joint design, filler wire, and shielding gas all change the result on your parts. Stainless steel behaves similarly, but aluminum's reflectivity and heat conduction reduce usable depth at the same power. If 4 mm or thicker joints are a regular part of your work, the 3,000 W Aqu 3000 gives you headroom up to 8 mm.

Filters