Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content

Filters

100W+ Fiber Laser Engravers

Running deep engraving or production marking all day? A 100W fiber laser engraves metal two to three times faster than 50W machines on deep jobs, reaching 0.7mm to 1mm and more on brass, steel and aluminum in practical cycle times. At 120W to 200W, fiber lasers handle relief coins, mold texturing, embossing dies and thin metal cutting up to around 1mm, which is why they anchor industrial engraving lines.

At The Maker's Chest, our 100W fiber laser engravers include JPT MOPA machines from Haotian, OMTech, BWM, ComMarker, Monport, Gweike and Full Spectrum, plus metal engraving and industrial production bundles. If you're comparing a 100W fiber laser against 200W, choose 100W for most deep engraving businesses and 200W for maximum throughput on production parts. We'll help you match wattage, lens and cooling to your daily volume, backed by setup support.

Need a 100W Fiber Laser for Deep Engraving?

Frequently Asked Questions

What can a 100W fiber laser do?

A 100W fiber laser deep engraves metal, typically 0.7mm to 1mm and beyond, for coins, relief logos, firearm parts, molds and dies. It also cuts thin sheet metal around 1mm thick and marks at very high speed for production work. It is the most common choice for dedicated deep engraving businesses, balancing speed with price.

Is a 200W fiber laser worth it?

A 200W fiber laser is worth it for high-volume production, deep relief and mold work where run time drives profit. It removes material roughly twice as fast as 100W on deep jobs. For most small businesses, 100W is the better buy, because 200W machines cost more, need more cooling and power, and the gains matter mainly at production volumes.

Do 100W fiber lasers need water cooling?

Most 100W fiber laser engravers are air-cooled, with built-in fans that handle typical engraving duty cycles. Some 120W to 200W machines and long continuous production runs benefit from a chiller or extra cooling. Check the duty cycle rating if you plan to run all day, and keep the source in a clean, temperature-stable room to protect its lifespan.

Skip the AI. Call an Expert. Skip the AI. Call an Expert.