Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content

Filters

Jewelry & Benchtop Laser Welders

Need to retip prongs, size rings or repair a chain without heat-staining the stones beside it? A jewelry laser welder fires short, focused Nd:YAG pulses under a microscope, so the heat stays within a fraction of a millimeter of the joint. Benchtop laser welders let jewelers, dental labs and watchmakers weld next to stones, solder joints and enamel that a torch would damage.

At The Maker's Chest, our benchtop laser welders come from Sunstone: the DADO, an affordable entry-level Nd:YAG welder, the Orion LZR Eco in 35J and 165J versions, and the 200J DL200 for mold and die repair. We also carry Sunstone's Orion pulse arc welders, an alternative that produces similar micro welds on gold, silver and platinum. Our pulse arc vs laser welder guide explains which fits your bench.

Which Jewelry or Benchtop Laser Welder Is Right for Your Bench?

Frequently Asked Questions

How much does a jewelry laser welder cost?

Benchtop jewelry laser welders start at about $5,500 for the Sunstone DADO and run to $10,000 to $12,900 for the Orion LZR Eco. Professional production systems from other brands often exceed $15,000. Pulse arc welders like the Orion 150x, at about $6,400, handle many of the same repairs and cost less than mid-range benchtop lasers. For most repair shops, the right choice depends on weekly repair volume and how often you weld next to stones or soldered joints.

Is a pulse arc welder or a laser welder better for jewelry?

Both produce micro welds that are hard to tell apart, but they work differently. A pulse arc welder uses a tungsten electrode and argon, costs less and handles conductive metals like silver well. A laser welder is contactless, faster for repeated welds and reaches tight spots an electrode can't, such as prong tips and inside settings. Many busy shops own both: pulse arc for routine sizing and chain work, laser for detail and stone-adjacent repairs.

Can a handheld fiber laser welder be used for jewelry?

Not for most jewelry work. Handheld fiber laser welders run at 700W to 3000W of continuous power, designed for sheet metal and fabrication, and their spot is far too large and hot for fine chains, prongs and settings. Jewelry needs short, low-energy pulses under magnification, which is what benchtop Nd:YAG welders like the DADO and Orion LZR deliver. A handheld suits jewelry only for larger work such as metal displays, fixtures or sculpture.

What can you weld with a benchtop laser welder?

A benchtop laser welder joins gold, silver, platinum, palladium, titanium, stainless steel and dental alloys in spots as small as a few tenths of a millimeter. Common jobs include retipping prongs, closing jump rings, sizing rings and repairing porosity in castings. Dental labs use them for frameworks and orthodontic wires, and toolrooms use higher-energy units like the 165J Orion LZR Eco and 200J DL200 to repair molds, dies and small machine parts.

Skip the AI. Call an Expert. Skip the AI. Call an Expert.