SFX APC-500 500W Air-Cooled Pulsed Laser Cleaning Machine
By SFX Laser
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
By SFX Laser
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Unlock Discount
A 300W pulsed cleaner is precise, but on a full set of kitchen cabinets, a stripped boat hull or a run of rusty equipment frames, precision alone does not pay the bills. What separates a profitable laser cleaning job from a slow one is how much surface you clear per hour without damaging the part underneath.
The SFX APC-500 is the high-output model in SFX Laser's APC series, the line SFX designed specifically for wood. It keeps the gentle, controllable slow-release pulse that lets the series clean wood without scorching, and adds roughly two-thirds more power and a wider 120 mm scan. The result is a single air-cooled machine that moves from furniture restoration to metal rust removal to mold cleaning, at a pace that suits contractors and production shops.
The APC-500 pairs 500W of pulsed power with a double-wobble head that scans up to 120 mm wide, compared with 300W and 100 mm on the APC-300. More average power means more energy reaches the surface every second, so heavier finishes and rust come off in fewer passes, and the wider sweep covers more area with each stroke. For a contractor billing by the job, that combination is what turns a two-day strip into a one-day strip while keeping the pulsed, low-heat behavior that protects the substrate.
Like the rest of the APC line, the APC-500 is a specialized laser wood cleaning machine. SFX describes its light source as soft, controllable and non-destructive, so it lifts paint, stain, water marks and graffiti from wood while leaving the grain intact. That makes it a credible alternative to sanding and chemical stripping for furniture restorers, heritage conservators and millwork shops, without dust clouds or solvent waste. Clear-only lacquer is the exception SFX calls out: it absorbs laser light poorly and cleans less effectively than pigmented coatings.

Six preset cleaning processes cover rust, oil, paint, coating, oxide and wood, and three custom slots store your own tuned settings for recurring jobs. A seven-pattern scanning menu shapes the beam into lines and areas for welds, edges or broad panels. Operators stop re-tuning between jobs, new staff get repeatable results faster, and the machine behaves the same way on Friday as it did on Monday.
The APC-500 accepts AC 110–220V ±10% and draws about 2 kW, so it does not force an electrical upgrade before the first job. Cooling is fully air-based, which removes the chiller, coolant and freeze risk that come with water-cooled units and keeps the cabinet to 630 × 425 × 630 mm. SFX reports testing the series at 40°C for 8 hours of continuous operation without power attenuation, so it holds output through long shifts in a hot shop.

As an IoT model, the APC-500 supports one-click smartphone control with real-time parameter adjustment, and SFX's technical team can connect for online diagnosis to resolve issues remotely. When a machine is part of your revenue, remote support that does not depend on a technician visit keeps downtime short.

SFX lists wooden furniture and cultural-relic restoration, precision mold cleaning, automobile repair, rubber molds, high-end machinery, rail transportation and maintenance as core applications. Pulsed delivery keeps heat out of tooling surfaces, so molds come back clean without the dimensional risk of abrasive blasting, and the same machine handles rust and coatings on vehicle parts and equipment.
The self-propelled automatic drive device (APC-500 IoT+ configuration) is not included with this model.
Warranty: 1 Year on the whole machine and 2 Years on the laser source (consumables such as protective lenses and nozzles are not covered), plus lifetime online technical support from SFX Laser and U.S. after-sales service centers in New York and California.
| Spec | SFX APC-300 | SFX APC-500 |
|---|---|---|
| Laser Power | 300W pulsed | 500W pulsed |
| Scanning Width | 0–100 mm | 0–120 mm |
| Input Power | 1.5 kW | 2 kW |
| Fiber Cable | 5 m | 5 m |
| Machine Size | 575 × 390 × 510 mm | 630 × 425 × 630 mm |
| Voltage | AC 110–220V | AC 110–220V |
| Best for | Wood restoration, molds, detailed work | Larger surfaces and faster coverage |
Choose the APC-300 if most of your work is restoration, molds or detailed parts and you want the smaller cabinet at a lower investment. Choose the APC-500 if you clean larger surfaces where wider coverage and more power per pass save labor hours.
Q: How much faster is the APC-500 than the APC-300?
A: SFX does not publish a fixed speed ratio, but the APC-500 has 500W instead of 300W and a 120 mm scanning width instead of 100 mm. In practice that means fewer passes on heavy finishes and rust and more area covered per stroke. Actual speed depends on the coating, its thickness and the substrate.
Q: Can the APC-500 clean wood?
A: Yes. The APC series is SFX's specialized laser wood cleaning line, designed to remove paint, stain and finishes without damaging the surface. Test on a hidden area first; pure clear lacquer cleans less effectively because it absorbs laser light poorly.
Q: Does the APC-500 run on 110V?
A: Yes. It accepts AC 110–220V ±10% and draws about 2 kW, so it can run from a North American outlet or a 220V circuit with no transformer.
Q: Is the APC-500 water-cooled?
A: No. It is fully air-cooled, so there is no chiller, coolant or freeze protection to manage. SFX tested the series for 8 hours of continuous operation at 40°C without power attenuation.
Q: What fiber cable length comes with this model?
A: This listing is the APC-500 with a 5 m fiber cable. SFX also builds a 10 m version; contact The Maker's Chest if you need the longer reach.
Q: What's the difference between a pulsed and a continuous-wave laser cleaner?
A: A pulsed cleaner fires short, high-peak bursts that remove contamination with minimal heat transfer, which suits wood, molds and thin parts. A continuous-wave cleaner, such as SFX's SLC series, strips heavy rust from steel quickly but puts more heat into the part and is not designed for wood.
Q: What applications is the APC-500 best for?
A: Furniture and cultural-relic restoration, precision mold and rubber mold cleaning, automobile repair, high-end machinery maintenance and rail transportation work, plus rust, paint, oil, coating and oxide removal on metal.
Q: What safety equipment do I need?
A: Laser safety eyewear rated for the 1070 nm wavelength, a controlled work area and fume extraction for the smoke and particulate produced by vaporized coatings.
Q: What warranty comes with the APC-500?
A: SFX Laser provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source (consumables excluded), with lifetime online support and U.S. service centers in New York and California.
Q: Why buy the APC-500 from The Maker's Chest?
A: Shipping is included in the price, you get a U.S.-based team to help size the machine to your work, and you can add fume extraction from the same retailer, from a team that supplies laser equipment to universities and businesses.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
Shipping Insurance ($89)
placeholder
A 300W pulsed cleaner is precise, but on a full set of kitchen cabinets, a stripped boat hull or a run of rusty equipment frames, precision alone does not pay the bills. What separates a profitable laser cleaning job from a slow one is how much surface you clear per hour without damaging the part underneath.
The SFX APC-500 is the high-output model in SFX Laser's APC series, the line SFX designed specifically for wood. It keeps the gentle, controllable slow-release pulse that lets the series clean wood without scorching, and adds roughly two-thirds more power and a wider 120 mm scan. The result is a single air-cooled machine that moves from furniture restoration to metal rust removal to mold cleaning, at a pace that suits contractors and production shops.
The APC-500 pairs 500W of pulsed power with a double-wobble head that scans up to 120 mm wide, compared with 300W and 100 mm on the APC-300. More average power means more energy reaches the surface every second, so heavier finishes and rust come off in fewer passes, and the wider sweep covers more area with each stroke. For a contractor billing by the job, that combination is what turns a two-day strip into a one-day strip while keeping the pulsed, low-heat behavior that protects the substrate.
Like the rest of the APC line, the APC-500 is a specialized laser wood cleaning machine. SFX describes its light source as soft, controllable and non-destructive, so it lifts paint, stain, water marks and graffiti from wood while leaving the grain intact. That makes it a credible alternative to sanding and chemical stripping for furniture restorers, heritage conservators and millwork shops, without dust clouds or solvent waste. Clear-only lacquer is the exception SFX calls out: it absorbs laser light poorly and cleans less effectively than pigmented coatings.

Six preset cleaning processes cover rust, oil, paint, coating, oxide and wood, and three custom slots store your own tuned settings for recurring jobs. A seven-pattern scanning menu shapes the beam into lines and areas for welds, edges or broad panels. Operators stop re-tuning between jobs, new staff get repeatable results faster, and the machine behaves the same way on Friday as it did on Monday.
The APC-500 accepts AC 110–220V ±10% and draws about 2 kW, so it does not force an electrical upgrade before the first job. Cooling is fully air-based, which removes the chiller, coolant and freeze risk that come with water-cooled units and keeps the cabinet to 630 × 425 × 630 mm. SFX reports testing the series at 40°C for 8 hours of continuous operation without power attenuation, so it holds output through long shifts in a hot shop.

As an IoT model, the APC-500 supports one-click smartphone control with real-time parameter adjustment, and SFX's technical team can connect for online diagnosis to resolve issues remotely. When a machine is part of your revenue, remote support that does not depend on a technician visit keeps downtime short.

SFX lists wooden furniture and cultural-relic restoration, precision mold cleaning, automobile repair, rubber molds, high-end machinery, rail transportation and maintenance as core applications. Pulsed delivery keeps heat out of tooling surfaces, so molds come back clean without the dimensional risk of abrasive blasting, and the same machine handles rust and coatings on vehicle parts and equipment.
The self-propelled automatic drive device (APC-500 IoT+ configuration) is not included with this model.
Warranty: 1 Year on the whole machine and 2 Years on the laser source (consumables such as protective lenses and nozzles are not covered), plus lifetime online technical support from SFX Laser and U.S. after-sales service centers in New York and California.
| Spec | SFX APC-300 | SFX APC-500 |
|---|---|---|
| Laser Power | 300W pulsed | 500W pulsed |
| Scanning Width | 0–100 mm | 0–120 mm |
| Input Power | 1.5 kW | 2 kW |
| Fiber Cable | 5 m | 5 m |
| Machine Size | 575 × 390 × 510 mm | 630 × 425 × 630 mm |
| Voltage | AC 110–220V | AC 110–220V |
| Best for | Wood restoration, molds, detailed work | Larger surfaces and faster coverage |
Choose the APC-300 if most of your work is restoration, molds or detailed parts and you want the smaller cabinet at a lower investment. Choose the APC-500 if you clean larger surfaces where wider coverage and more power per pass save labor hours.
Q: How much faster is the APC-500 than the APC-300?
A: SFX does not publish a fixed speed ratio, but the APC-500 has 500W instead of 300W and a 120 mm scanning width instead of 100 mm. In practice that means fewer passes on heavy finishes and rust and more area covered per stroke. Actual speed depends on the coating, its thickness and the substrate.
Q: Can the APC-500 clean wood?
A: Yes. The APC series is SFX's specialized laser wood cleaning line, designed to remove paint, stain and finishes without damaging the surface. Test on a hidden area first; pure clear lacquer cleans less effectively because it absorbs laser light poorly.
Q: Does the APC-500 run on 110V?
A: Yes. It accepts AC 110–220V ±10% and draws about 2 kW, so it can run from a North American outlet or a 220V circuit with no transformer.
Q: Is the APC-500 water-cooled?
A: No. It is fully air-cooled, so there is no chiller, coolant or freeze protection to manage. SFX tested the series for 8 hours of continuous operation at 40°C without power attenuation.
Q: What fiber cable length comes with this model?
A: This listing is the APC-500 with a 5 m fiber cable. SFX also builds a 10 m version; contact The Maker's Chest if you need the longer reach.
Q: What's the difference between a pulsed and a continuous-wave laser cleaner?
A: A pulsed cleaner fires short, high-peak bursts that remove contamination with minimal heat transfer, which suits wood, molds and thin parts. A continuous-wave cleaner, such as SFX's SLC series, strips heavy rust from steel quickly but puts more heat into the part and is not designed for wood.
Q: What applications is the APC-500 best for?
A: Furniture and cultural-relic restoration, precision mold and rubber mold cleaning, automobile repair, high-end machinery maintenance and rail transportation work, plus rust, paint, oil, coating and oxide removal on metal.
Q: What safety equipment do I need?
A: Laser safety eyewear rated for the 1070 nm wavelength, a controlled work area and fume extraction for the smoke and particulate produced by vaporized coatings.
Q: What warranty comes with the APC-500?
A: SFX Laser provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source (consumables excluded), with lifetime online support and U.S. service centers in New York and California.
Q: Why buy the APC-500 from The Maker's Chest?
A: Shipping is included in the price, you get a U.S.-based team to help size the machine to your work, and you can add fume extraction from the same retailer, from a team that supplies laser equipment to universities and businesses.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if: