Haotian HT-300 300W 5 mJ JPT Pulsed Laser Cleaner
By Haotian
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
By Haotian
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Unlock Discount
Wire wheels, sandblasters and chemical strippers all take something you wanted to keep. A wire wheel rounds crisp edges, blasting media erodes the surface and has to be contained and swept up, and strippers leave hazardous waste behind. On molds, tooling, restoration parts and finished components, that collateral damage often costs more than the cleaning itself.
The HT-300 removes contamination with non-contact pulsed laser ablation. Rust, paint and oxide absorb the 1,064 nm beam and vaporize, while clean metal underneath reflects most of the energy. There's no media, no chemicals and no consumables beyond protective lenses, and because it plugs into an ordinary 110 V circuit, it goes wherever the work is.
A pulsed source fires energy in bursts lasting 13 to 500 nanoseconds, each one carrying up to 5 mJ. That's enough peak power to break the bond between a contaminant and the substrate, but each pulse is too brief for heat to soak into the part. A continuous-wave cleaner works the other way: it pours steady heat onto the surface, which is fast on heavy structural steel but can heat-tint stainless, warp thin sheet or change a mold's texture. For aluminum castings, thin panels, polished tooling and parts with machined edges, pulsed cleaning is what lets you strip the surface back to bare metal and leave the geometry exactly as it was.
The MOPA (master oscillator power amplifier) design is what separates the HT-300 from basic Q-switched cleaners, which run at a fixed pulse width. Here you set pulse duration (13–500 ns), repetition rate (1–3,000 kHz) and power (10–100%) independently. Short pulses at high frequency give a fine, even finish on light oxide, weld discoloration and thin coatings. Longer, higher-energy pulses at lower frequency hit harder for paint and stubborn rust. One machine covers both, and once a setting works on a part, you can repeat it on the next batch.
The ZBTK controller drives a dual-axis galvo scan head through 12 scan patterns, from a single line to wide fills. A narrow line cleans a weld seam, a groove or the edge of a flange without overspraying onto the finished face beside it. A wide rectangle or fill clears a flat surface in fewer passes. Single-axis heads can only sweep a line back and forth, so matching the pattern to the feature means less overlap, fewer passes and less time per part.
The handheld head projects dual red aiming guides onto the part, outlining the scan area before the laser fires. The operator can line up on a seam, stay inside a masked boundary or work right up to a gasket face without guessing where the beam will land. That matters on assemblies where the area next to the rust has to stay untouched, and it shortens the learning curve for new operators, who can see the result of each positioning change instantly.

The HT-300 is fully air cooled. There's no water chiller to buy, fill with distilled water, service or protect from freezing in an unheated building or service truck. The 5 m fiber lead lets the operator walk around a fixture, vehicle or assembly while the cabinet stays parked, and at 800 g the cleaning head is light enough for long handheld sessions without fatigue affecting accuracy. Setup is unpacking, connecting air and power, and starting work.
Haotian builds the HT-300 in 110 V and 220–240 V single-phase versions, both drawing just 960 W: 9 A at 110 V or 4.5 A at 220 V. Most 1,500–3,000 W continuous-wave cleaners need a dedicated 220 V or three-phase supply, so this is a real installation saving. The 110 V build runs from an ordinary U.S. shop receptacle, ideally on a dedicated 15–20 A circuit, and can move between bays, buildings or customer job sites without calling an electrician.
Haotian specifies filtered, dry compressed air at the cleaning head and includes 3 m of air tubing. The air stream pushes ablated debris and fume away from the protective lens, which keeps beam quality consistent and extends lens life. Moist or oily shop air would coat the optics, so run it through a filter-dryer. The six spare D43 × 2 protective lenses in the box cover routine replacement for months of normal use.
| Specification | Value |
|---|---|
| Model | HT-300 |
| Laser output | 300 W |
| Source | JPT MOPA pulsed fiber |
| Maximum single-pulse energy | 5 mJ |
| Wavelength | 1,064 nm |
| Pulse duration | 13–500 ns |
| Pulse repetition rate range | 1–3,000 kHz |
| Power adjustment | 10–100% |
| Controller | ZBTK |
| Scan head | Dual-axis head with dual red aiming guides |
| Scan patterns | 12 |
| Cooling | Air cooled |
| Fiber cable | 5 m |
| Cleaning head weight | 800 g |
| Input options | 110 V or 220–240 V, single phase |
| Manufacturer-listed input current | 9 A at 110 V / 4.5 A at 220 V |
| Power consumption | 960 W |
| Air assist | Filtered, dry compressed air |
| Warranty | 3 Years |
The Haotian HT-300 is covered by a 3-year warranty when purchased through The Maker's Chest, three times the 1-year term common on imported laser cleaners, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your application before you order so the machine you receive is the right one.
| Configuration | 110 V | 220–240 V |
|---|---|---|
| Electrical service | 110 V single phase | 220–240 V single phase |
| Manufacturer-listed current | 9 A at 110 V | 4.5 A at 220 V |
| Power consumption | 960 W | 960 W |
| Cleaning performance | 300 W / 5 mJ | 300 W / 5 mJ |
| Best for | Standard shop outlets, mobile and on-site work | Bays already wired for 240 V equipment |
| Price | US$8,500 | US$8,500 |
Choose 110 V if you want to plug into a standard U.S. shop outlet or take the cleaner to job sites.
Choose 220–240 V if your workstation already has a 240 V single-phase circuit and you want the lowest current draw.
Q: What can the HT-300 remove?
A: It removes rust, oxides, paint, coatings, oil, grease and weld discoloration from steel, stainless steel, aluminum, copper, brass and other metals. It's strongest on precision and moderate-area work; multi-layer paint over very large areas is faster with a higher-power or continuous-wave cleaner.
Q: Will the laser damage the metal underneath?
A: Not with correct settings. Contaminants absorb far more 1,064 nm energy than clean metal, and the nanosecond pulses limit heat input, so the substrate isn't warped, pitted or heat-tinted. That's the core advantage over blasting, wire wheels and continuous-wave lasers on delicate parts.
Q: What's the difference between a pulsed and a continuous-wave laser cleaner?
A: A pulsed cleaner like the HT-300 fires short, high-peak-power bursts that remove contaminants with minimal heat, which suits thin, finished and precision parts. A continuous-wave cleaner delivers more raw wattage per dollar and is faster on heavy rust and structural steel, but it puts more heat into the workpiece.
Q: What do 300 W and 5 mJ mean?
A: 300 W is the average output power, which sets how much area the machine can clean per hour. 5 mJ is the maximum energy in a single pulse, which determines how hard each pulse hits. Together they make the HT-300 well suited to fine, controlled cleaning at a productive pace.
Q: Can the HT-300 run on a regular 110 V outlet?
A: Yes, if you order the 110 V build. It draws 960 W, about 9 A, so a standard shop receptacle works; a dedicated 15–20 A circuit keeps other tools from tripping the breaker. A 220–240 V build drawing 4.5 A is also available.
Q: Does it need a water chiller or compressed air?
A: No chiller. The HT-300 is fully air cooled, with no coolant, distilled water or freeze risk. It does need filtered, dry compressed air at the cleaning head to keep debris off the protective lens; 3 m of air tubing is included.
Q: What safety equipment do I need?
A: The HT-300 is a Class 4 laser. Everyone in the work area needs eyewear rated for 1,064 nm (one OD8+ pair is included), the area should be controlled with barriers or laser curtains, and you should run a fume extractor, because ablated paint and coatings can be hazardous to breathe.
Q: What does the price include?
A: The US$8,500 price includes the machine, scan head, spare lenses, eyewear and accessories listed above, with door-to-door delivered duty paid shipping.
Q: What warranty and support come with the HT-300?
A: Through The Maker's Chest, the HT-300 carries a 3-year warranty and USA-based technical support. Consumables such as protective lenses are replaced as part of normal maintenance.
Q: Can I return a Haotian machine?
A: No. Haotian machines are built to order, and The Maker's Chest does not accept returns on them. That's why we review your parts, contaminants and power supply with you before you order.
Q: Why buy the HT-300 from The Maker's Chest?
A: You get a 3-year warranty, USA-based technical support and an application review from a team that sells both pulsed and continuous-wave cleaners and will steer you to the right one. We also supply universities, schools and businesses and can handle purchase orders.
| Specification | Value |
|---|---|
| Model | HT-300 |
| Laser output | 300 W |
| Source | JPT MOPA pulsed fiber |
| Maximum single-pulse energy | 5 mJ |
| Wavelength | 1,064 nm |
| Pulse duration | 13–500 ns |
| Pulse repetition rate range | 1–3,000 kHz |
| Power adjustment | 10–100% |
| Controller | ZBTK |
| Scan head | Dual-axis head with dual red aiming guides |
| Scan patterns | 12 |
| Cooling | Air cooled |
| Fiber cable | 5 m |
| Cleaning head weight | 800 g |
| Input options | 110 V or 220–240 V, single phase |
| Manufacturer-listed input current | 9 A at 110 V / 4.5 A at 220 V |
| Power consumption | 960 W |
| Air assist | Filtered, dry compressed air |
| Warranty | 3 Years |
The Haotian HT-300 is covered by a 3-year warranty when purchased through The Maker's Chest, three times the 1-year term common on imported laser cleaners, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your application before you order so the machine you receive is the right one.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
Shipping Insurance ($89)
Wire wheels, sandblasters and chemical strippers all take something you wanted to keep. A wire wheel rounds crisp edges, blasting media erodes the surface and has to be contained and swept up, and strippers leave hazardous waste behind. On molds, tooling, restoration parts and finished components, that collateral damage often costs more than the cleaning itself.
The HT-300 removes contamination with non-contact pulsed laser ablation. Rust, paint and oxide absorb the 1,064 nm beam and vaporize, while clean metal underneath reflects most of the energy. There's no media, no chemicals and no consumables beyond protective lenses, and because it plugs into an ordinary 110 V circuit, it goes wherever the work is.
A pulsed source fires energy in bursts lasting 13 to 500 nanoseconds, each one carrying up to 5 mJ. That's enough peak power to break the bond between a contaminant and the substrate, but each pulse is too brief for heat to soak into the part. A continuous-wave cleaner works the other way: it pours steady heat onto the surface, which is fast on heavy structural steel but can heat-tint stainless, warp thin sheet or change a mold's texture. For aluminum castings, thin panels, polished tooling and parts with machined edges, pulsed cleaning is what lets you strip the surface back to bare metal and leave the geometry exactly as it was.
The MOPA (master oscillator power amplifier) design is what separates the HT-300 from basic Q-switched cleaners, which run at a fixed pulse width. Here you set pulse duration (13–500 ns), repetition rate (1–3,000 kHz) and power (10–100%) independently. Short pulses at high frequency give a fine, even finish on light oxide, weld discoloration and thin coatings. Longer, higher-energy pulses at lower frequency hit harder for paint and stubborn rust. One machine covers both, and once a setting works on a part, you can repeat it on the next batch.
The ZBTK controller drives a dual-axis galvo scan head through 12 scan patterns, from a single line to wide fills. A narrow line cleans a weld seam, a groove or the edge of a flange without overspraying onto the finished face beside it. A wide rectangle or fill clears a flat surface in fewer passes. Single-axis heads can only sweep a line back and forth, so matching the pattern to the feature means less overlap, fewer passes and less time per part.
The handheld head projects dual red aiming guides onto the part, outlining the scan area before the laser fires. The operator can line up on a seam, stay inside a masked boundary or work right up to a gasket face without guessing where the beam will land. That matters on assemblies where the area next to the rust has to stay untouched, and it shortens the learning curve for new operators, who can see the result of each positioning change instantly.

The HT-300 is fully air cooled. There's no water chiller to buy, fill with distilled water, service or protect from freezing in an unheated building or service truck. The 5 m fiber lead lets the operator walk around a fixture, vehicle or assembly while the cabinet stays parked, and at 800 g the cleaning head is light enough for long handheld sessions without fatigue affecting accuracy. Setup is unpacking, connecting air and power, and starting work.
Haotian builds the HT-300 in 110 V and 220–240 V single-phase versions, both drawing just 960 W: 9 A at 110 V or 4.5 A at 220 V. Most 1,500–3,000 W continuous-wave cleaners need a dedicated 220 V or three-phase supply, so this is a real installation saving. The 110 V build runs from an ordinary U.S. shop receptacle, ideally on a dedicated 15–20 A circuit, and can move between bays, buildings or customer job sites without calling an electrician.
Haotian specifies filtered, dry compressed air at the cleaning head and includes 3 m of air tubing. The air stream pushes ablated debris and fume away from the protective lens, which keeps beam quality consistent and extends lens life. Moist or oily shop air would coat the optics, so run it through a filter-dryer. The six spare D43 × 2 protective lenses in the box cover routine replacement for months of normal use.
| Specification | Value |
|---|---|
| Model | HT-300 |
| Laser output | 300 W |
| Source | JPT MOPA pulsed fiber |
| Maximum single-pulse energy | 5 mJ |
| Wavelength | 1,064 nm |
| Pulse duration | 13–500 ns |
| Pulse repetition rate range | 1–3,000 kHz |
| Power adjustment | 10–100% |
| Controller | ZBTK |
| Scan head | Dual-axis head with dual red aiming guides |
| Scan patterns | 12 |
| Cooling | Air cooled |
| Fiber cable | 5 m |
| Cleaning head weight | 800 g |
| Input options | 110 V or 220–240 V, single phase |
| Manufacturer-listed input current | 9 A at 110 V / 4.5 A at 220 V |
| Power consumption | 960 W |
| Air assist | Filtered, dry compressed air |
| Warranty | 3 Years |
The Haotian HT-300 is covered by a 3-year warranty when purchased through The Maker's Chest, three times the 1-year term common on imported laser cleaners, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your application before you order so the machine you receive is the right one.
| Configuration | 110 V | 220–240 V |
|---|---|---|
| Electrical service | 110 V single phase | 220–240 V single phase |
| Manufacturer-listed current | 9 A at 110 V | 4.5 A at 220 V |
| Power consumption | 960 W | 960 W |
| Cleaning performance | 300 W / 5 mJ | 300 W / 5 mJ |
| Best for | Standard shop outlets, mobile and on-site work | Bays already wired for 240 V equipment |
| Price | US$8,500 | US$8,500 |
Choose 110 V if you want to plug into a standard U.S. shop outlet or take the cleaner to job sites.
Choose 220–240 V if your workstation already has a 240 V single-phase circuit and you want the lowest current draw.
Q: What can the HT-300 remove?
A: It removes rust, oxides, paint, coatings, oil, grease and weld discoloration from steel, stainless steel, aluminum, copper, brass and other metals. It's strongest on precision and moderate-area work; multi-layer paint over very large areas is faster with a higher-power or continuous-wave cleaner.
Q: Will the laser damage the metal underneath?
A: Not with correct settings. Contaminants absorb far more 1,064 nm energy than clean metal, and the nanosecond pulses limit heat input, so the substrate isn't warped, pitted or heat-tinted. That's the core advantage over blasting, wire wheels and continuous-wave lasers on delicate parts.
Q: What's the difference between a pulsed and a continuous-wave laser cleaner?
A: A pulsed cleaner like the HT-300 fires short, high-peak-power bursts that remove contaminants with minimal heat, which suits thin, finished and precision parts. A continuous-wave cleaner delivers more raw wattage per dollar and is faster on heavy rust and structural steel, but it puts more heat into the workpiece.
Q: What do 300 W and 5 mJ mean?
A: 300 W is the average output power, which sets how much area the machine can clean per hour. 5 mJ is the maximum energy in a single pulse, which determines how hard each pulse hits. Together they make the HT-300 well suited to fine, controlled cleaning at a productive pace.
Q: Can the HT-300 run on a regular 110 V outlet?
A: Yes, if you order the 110 V build. It draws 960 W, about 9 A, so a standard shop receptacle works; a dedicated 15–20 A circuit keeps other tools from tripping the breaker. A 220–240 V build drawing 4.5 A is also available.
Q: Does it need a water chiller or compressed air?
A: No chiller. The HT-300 is fully air cooled, with no coolant, distilled water or freeze risk. It does need filtered, dry compressed air at the cleaning head to keep debris off the protective lens; 3 m of air tubing is included.
Q: What safety equipment do I need?
A: The HT-300 is a Class 4 laser. Everyone in the work area needs eyewear rated for 1,064 nm (one OD8+ pair is included), the area should be controlled with barriers or laser curtains, and you should run a fume extractor, because ablated paint and coatings can be hazardous to breathe.
Q: What does the price include?
A: The US$8,500 price includes the machine, scan head, spare lenses, eyewear and accessories listed above, with door-to-door delivered duty paid shipping.
Q: What warranty and support come with the HT-300?
A: Through The Maker's Chest, the HT-300 carries a 3-year warranty and USA-based technical support. Consumables such as protective lenses are replaced as part of normal maintenance.
Q: Can I return a Haotian machine?
A: No. Haotian machines are built to order, and The Maker's Chest does not accept returns on them. That's why we review your parts, contaminants and power supply with you before you order.
Q: Why buy the HT-300 from The Maker's Chest?
A: You get a 3-year warranty, USA-based technical support and an application review from a team that sells both pulsed and continuous-wave cleaners and will steer you to the right one. We also supply universities, schools and businesses and can handle purchase orders.
| Specification | Value |
|---|---|
| Model | HT-300 |
| Laser output | 300 W |
| Source | JPT MOPA pulsed fiber |
| Maximum single-pulse energy | 5 mJ |
| Wavelength | 1,064 nm |
| Pulse duration | 13–500 ns |
| Pulse repetition rate range | 1–3,000 kHz |
| Power adjustment | 10–100% |
| Controller | ZBTK |
| Scan head | Dual-axis head with dual red aiming guides |
| Scan patterns | 12 |
| Cooling | Air cooled |
| Fiber cable | 5 m |
| Cleaning head weight | 800 g |
| Input options | 110 V or 220–240 V, single phase |
| Manufacturer-listed input current | 9 A at 110 V / 4.5 A at 220 V |
| Power consumption | 960 W |
| Air assist | Filtered, dry compressed air |
| Warranty | 3 Years |
The Haotian HT-300 is covered by a 3-year warranty when purchased through The Maker's Chest, three times the 1-year term common on imported laser cleaners, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your application before you order so the machine you receive is the right one.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
placeholder