Portable multi-process laser systems
Best when one compact, air-cooled machine needs to handle welding, weld cleaning, and light cutting.
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
A handheld laser welder is the single biggest upgrade available to any metal fabricator, restoration shop, or serious hobbyist working with thin-to-medium gauge metal. Unlike traditional MIG or TIG welding, a handheld fiber laser welding machine delivers a focused 1080nm beam that produces clean, spatter-free welds with minimal heat distortion — often requiring zero post-weld grinding or polishing. The learning curve is measured in hours, not years, and most users are producing professional-quality welds on stainless steel, aluminum, carbon steel, and galvanized sheet metal within their first session. With air-cooled and water-cooled options available from 700W to 2000W+, there is a machine for every application and production volume.
At The Maker's Chest, every handheld laser welder we carry has been evaluated for real-world weld quality, build reliability, ease of setup, and North American support availability. Whether you are buying your first laser welder or adding a dedicated machine to an established fab shop, our team offers free pre-purchase consultations to match you with the right machine for your materials, thickness range, and budget. Browse our full lineup of portable fiber laser welders below — and call or book a consultation before you buy.
Choose by process, material thickness, power, and expected production volume.
Best when one compact, air-cooled machine needs to handle welding, weld cleaning, and light cutting.
A practical starting point for thinner stainless and carbon steel, repair work, and portable fabrication.
Choose this range for a balance of portability, penetration, and production speed across common fabrication work.
Best for thicker material, faster travel speeds, and shops moving into higher-throughput fabrication.
The strongest fit for demanding welds, maximum throughput, and sustained professional production.
Save $1,479.80
The 1400W Handheld Laser Welder That Makes Its Own Shielding Gas, So There's No Cylinder to Rent, Refill or Haul The SFX ALW-1400 combines a 1400W ...
View full details
Save $1,639.80
2000W of Handheld Laser Welding That Runs 3–8× Faster Than TIG, Then Cleans the Seam With the Same Head The SFX SLW-2000 pairs a 2000W MAX fiber la...
View full detailsHandheld laser welders have moved from novelty into mainstream fabrication, and for shops running thin-to-medium stainless steel or aluminum, the machines pay for themselves through speed gains and reduced post-weld grinding time. Traditional TIG welding on stainless often requires 20-40 minutes of grinding and polishing per part to achieve a presentable finish, while laser welds come out smooth enough that most of that cleanup step disappears entirely. That reduction in finishing labor is where the real savings show up, not just in the weld itself. For low-volume hobbyist use the payback period is longer, but shops processing multiple parts daily typically recover the machine's cost within a year or two.
Manufacturers report handheld laser welding running up to 4x faster than TIG on compatible material, primarily because the process eliminates most post-weld grinding and polishing. TIG welding requires slow, controlled torch movement and filler feeding to avoid burn-through and warping, while a laser welder's concentrated heat input creates a narrower heat-affected zone, which both speeds up the weld pass and produces a cleaner bead that needs little to no follow-up finishing. The time saved on finishing often outweighs the time saved on the weld pass itself, especially on visible or cosmetic parts. Thicker material or awkward joint angles narrow that speed advantage since TIG's manual control still has an edge there.
The wobble function oscillates the laser beam side-to-side as it travels along the joint instead of delivering a single fixed point, which widens the effective weld zone and helps bridge small gaps in joint fit-up. Most machines let the operator adjust both the wobble frequency and amplitude, so the weld width can be tuned to the joint — a tighter wobble for precise seams, a wider one for gappy or poorly fitted material. This adjustability is what makes laser welding forgiving of imperfect fit-up, a common issue with hand-cut or slightly warped sheet metal. Without wobble, a laser weld would be a very narrow line with little tolerance for gaps or misalignment.
A handheld laser welder can replace TIG for most thin-to-medium sheet metal work, though TIG still gives more manual control on odd angles and thick plate, so many shops keep both. Laser welders excel on stainless steel and aluminum sheet up to roughly 1/4 inch thick where speed and clean finish matter most, but TIG remains the better tool for thick structural plate, tight interior corners, or repair work where a welder needs to see and adjust the puddle in real time. Keeping both machines covers the full range of fabrication work rather than forcing every job through one process. Shops that specialize heavily in thin sheet work are the ones most likely to go laser-only.
Entry-level handheld laser welders start around $2,000 to $3,600 for hobbyist-grade units, while shop-ready 1500-2000W machines typically run $3,600 to $7,800 depending on power and features. Price scales mostly with laser power and included features like wire feed, wobble control, and cooling system quality — a higher-wattage machine welds thicker material faster but costs proportionally more. Power output is the single biggest cost driver across the lineup, more so than brand name. Buyers doing occasional thin-gauge repairs can get by with a lower-wattage unit, while shops running daily production should budget toward the higher end of that range.
Shipping Insurance ($89)
placeholder