The Lowest-Cost Way Into IPG Laser Welding — 1,000 W, Made in the USA, Built for Sheet Metal The LightWELD 1000 welds steels up to 0.156" (9 gauge...
View full details“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
A 1500W laser welder is the most widely sold configuration for a reason: it welds carbon and stainless steel up to about 4mm in a single pass at productive speeds, handles aluminum with more margin than 700W units, and reaches about 1mm on copper. For most fabrication shops, 1000W to 1500W is the sweet spot between capacity, cost and portability.
At The Maker's Chest, our 1000W to 1500W laser welders include the IPG LightWELD 1000 and 1500 series with built-in cleaning, THEO MA1-45 and MA1-65, Herolaser 1000W and 1500W air-cooled models, Gweike 1200W, xTool MetalFab 1200W and the water-cooled OMTech 1500W. If you're choosing a 1500W laser welder, compare duty cycle, cooling and warranty, not just wattage. Our power guide shows where 1500W tops out.
Save $-18,000.00
The Lowest-Cost Way Into IPG Laser Welding — 1,000 W, Made in the USA, Built for Sheet Metal The LightWELD 1000 welds steels up to 0.156" (9 gauge...
View full details
Save $-22,500.00
The Original IPG Handheld Laser Welder — 1,500 W of Air-Cooled Power for Steel and Aluminum Up to 4 mm The LightWELD 1500 delivers 1,500 W average...
View full details
Save $-33,000.00
More Penetration From the Same 1,500 W — a 60 µm Spot With Over 6X the Energy Density The LightWELD 1500 XR welds steels up to 0.234", aluminum up...
View full details
Save $-27,750.00
Weld and Laser-Clean With One 1,500 W System — Prep, Weld and Finish Without Abrasives or Chemicals The LightWELD 1500 XC pairs 1,500 W welding wi...
View full details
Sold out
Cut Faster, Weld Cleaner, and Work Anywhere with the Gweike Gweike 3-in-1 Handheld Laser Welder. The Gweike 3-in-1 Handheld Laser Welder redefines ...
View full details
Sale
Weld, Cut, Clean and Engrave Metal With One Machine, and Stop Outsourcing the Work A handheld fiber laser welder that docks into a CNC cutting bed....
View full details
Save $-16,980.00
More Power. More Depth. The Same Ease of Use That Makes the MA1 Series Remarkable. The THEO MA1-45 is a 1,200W handheld fiber laser welder that pu...
View full details
Save $-19,980.00
The Handheld Laser Welder That Goes Where Traditional Fabrication Stops. The THEO MA1-65 is a 1,500W handheld fiber laser welder capable of reachi...
View full details
Sold out
[Ships Oct 30th] One Machine for Welding, Cleaning, and Cutting — The Handheld Fiber Laser That Replaces Three Steps. The OMTech 1500W Handheld Fib...
View full details
Save $-5,899.00
1000W of Air-Cooled Fiber Power That Welds Steel, Stainless, and Galvanized Metal Without a Chiller The Herolaser 1000W Air-Cooled Handheld Laser W...
View full details
Save $-6,749.00
1500W of Air-Cooled Laser Power — No Chiller, No Gas Bottle, No TIG Stack-Up The Herolaser 1500W Air-Cooled Portable Laser Welder delivers 1500W of...
View full details
Save $1,479.80
The 1400W Handheld Laser Welder That Makes Its Own Shielding Gas, So There's No Cylinder to Rent, Refill or Haul The SFX ALW-1400 combines a 1400W ...
View full detailsA 1500W handheld fiber laser welds carbon steel and stainless steel up to about 4mm in a single pass on most machines, aluminum up to roughly 3mm to 4mm depending on the machine, galvanized steel, titanium and copper up to about 1mm. That range covers most enclosures, frames, brackets, railings and auto body work. Thicker joints are possible with double-sided welds or filler wire, but frequent 5mm+ work points to a 2000W machine.
Choose 1000W if most of your work is 3mm and under and you want lower cost or lighter weight, and 1500W if you weld 3mm to 4mm steel, frequent aluminum or any copper. The extra power mainly buys faster travel speed and more margin for imperfect fit-up, which reduces rework. The price gap within the same brand is often $1,000 to $5,000, so 1500W is usually the safer long-term choice for a fabrication shop.
Not always. Many current 1500W handheld welders are air-cooled, including the IPG LightWELD 1500, THEO MA1-65 and Herolaser 1500W, so they need no chiller. Others, like the OMTech 1500W, use water cooling, which supports long continuous welding at full power but adds a chiller to maintain. Air-cooled models suit mixed shop and field work; water-cooled machines suit production cells that weld all day.
Shipping Insurance ($89)
placeholder