“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
More Penetration From the Same 1,500 W — a 60 µm Spot With Over 6X the Energy Density
The LightWELD 1500 XR welds steels up to 0.234", aluminum up to 0.229", titanium and nickel alloys up to 0.203" and copper up to 0.081", and laser-cleans up to 15 mm wide at 2,500 W peak.
Power is only half the story in laser welding. What decides penetration on thick sections, and whether copper or titanium welds reliably at all, is how tightly that power is focused. The IPG LightWELD 1500 XR (eXtended Range) keeps the 1,500 W platform but shrinks the spot to 60 µm, versus 150 µm on the 1500 and 1500 XC, giving more than 6X the energy density.
That makes thicker steel and aluminum easier and faster to penetrate, adds finesse on thin material, and opens a wider process window on difficult metals. The XR also includes full laser cleaning, so it is a weld, prep and finish system in one air-cooled, made-in-USA unit.
Weld Thicker Sections With a Smaller, Hotter Spot
Concentrating 1,500 W into a 60 µm spot drives a deeper keyhole than the same power spread over 150 µm. IPG rates the XR for single-sided welds in steels up to 0.234" (4 gauge), 3 and 5 series aluminum up to 0.229" (3 gauge) and 6 series aluminum up to 0.204" (4 gauge), well beyond the 4 mm limit of the 1500 and XC. The smaller spot also shrinks the heat-affected zone, so there is less distortion of the surrounding surface on both thick and thin parts.
Weld Copper, Titanium and Nickel Alloys
Copper reflects most laser light and pulls heat away fast; titanium and nickel alloys punish inconsistent heat input. The XR's higher energy density gives a wider process window on these materials. IPG rates it for titanium and nickel alloys up to 0.203" (6 gauge) and copper up to 0.081" (12 gauge). For shops doing busbars, heat exchangers, aerospace brackets or exhaust components, that capability is usually the reason to choose the XR over the 1500 XC.
Laser-Clean Before and After Every Weld
The XR includes dedicated cleaning with 2,500 W high-frequency peak power and a cleaning width up to 15 mm (0.600"). Pre-weld cleaning removes grease, oil, rust and excess oxide from the joint; post-weld cleaning removes soot, weld debris and discoloration from the seam. Switching between welding and cleaning is as simple as changing the nozzle, and three cleaning nozzles plus preset cleaning modes are included.
Weld Up to 4X Faster Than TIG With Wobble and Presets
IPG rates LightWELD at up to 4X faster than TIG. The XR's wobble welding adds up to 0.200" (5 mm) of weld width to bridge fit-up gaps and produce smooth cosmetic beads, and factory presets for welding and cleaning give new operators a validated starting point for each material and thickness. Advanced users can customize and save presets so results stay consistent across shifts.
Air-Cooled, 220 V, and Ready to Automate
The XR base unit is air-cooled, measures 641 × 316 × 534 mm (25.2 × 12.4 × 21 in) and weighs 53 kg (118 lb). It runs on 220 V single-phase with standard argon, nitrogen or argon/CO2 gas, and one 10 m (32 ft) cable carries laser, gas and gun control. When volume justifies it, the XR is compatible with the LightWELD Cobot System, which IPG says can be taught by hand-guiding in minutes with no coding.
IPG's Layered Safety System
The XR uses the same Class 4 safety architecture as the rest of the line: key switch, E-stop, fiber delivery interlock, 2-step trigger, a part-contact interlock so the laser only fires with the nozzle on the part, plume detection that cuts power if no weld forms, and a door interlock circuit. A laser welding helmet with IR shield and OD 6+ glasses are included.
Who the LightWELD 1500 XR Is Built For
Fabricators welding 3/16" to 1/4" steel and aluminum by hand
Electrical and thermal manufacturers welding copper
Aerospace, motorsport and exhaust shops working in titanium and nickel alloys
Shops that clean and weld at one station to cut finishing time
Operations planning cobot automation on the LightWELD platform
What's in the Box
IPG LightWELD 1500 XR air-cooled base unit
10 m (32 ft) IPG laser welding gun cable (laser, gas and gun control in one cable)
10 m (32 ft) workpiece clamp
(4) welding nozzle tips
(3) cleaning nozzle tips and weld head nozzle cleaning attachment
Pre-set cleaning mode software
(5) cover slides
Laser welding helmet with IR shield
Laser safety glasses, OD 6+
3 m (10 ft) CAT 6 Ethernet cable
Getting Started Guide
Specifications
Laser Power (Welding)
Up to 1,500 W
Peak Power (Cleaning)
Up to 2,500 W
Laser Type
Air-cooled ytterbium CW fiber laser, 1070 nm
Spot Size
60 µm
Steels
Up to 0.234" (4 gauge)
Aluminum 3 & 5 Series
Up to 0.229" (3 gauge)
Aluminum 6 Series
Up to 0.204" (4 gauge)
Nickel Alloy / Titanium
Up to 0.203" (6 gauge)
Copper
Up to 0.081" (12 gauge)
Wobble Welding Width
Up to 0.200" (5 mm)
Cleaning Width
Up to 0.600" (15 mm)
Wire Welding
Yes, with optional IPG wire feeder
Input Power
220 V single-phase, 50/60 Hz, <30 A
Cooling
Air-cooled (no chiller)
Process Gas
Argon, nitrogen, or argon + CO2 mix
Gun Cable
10 m (32 ft), laser, gas and gun control in one cable
Connectivity
Ethernet web interface for advanced parameter settings
The IPG LightWELD 1500 XR is made in the USA by IPG Photonics and ships with IPG's 1-year standard warranty. Purchases from The Maker's Chest include our 75-day return window.
The Maker's Chest Difference
🇺🇸 Bought directly from IPG Photonics: The Maker's Chest holds a direct IPG account, so your LightWELD ships new from IPG with IPG's factory warranty
🛠️ IPG's 1-year standard warranty, with The Maker's Chest coordinating warranty service with IPG's U.S. team in Massachusetts
↩️ 75-day return window on every LightWELD bought through The Maker's Chest
🔍 XR or 2000 XR? Tell us your thickest steel, aluminum and copper joints and we will tell you whether the 1500 XR covers them or whether the 2000 XR is worth the step up
🔬 Copper and titanium setup help: nozzle selection, gas choice and preset starting points for reflective and reactive metals
🧯 Laser-safe shop planning: we help you set up a controlled laser area, door interlocks, PPE and fume extraction before the machine arrives
💬 U.S.-based support from The Maker's Chest by phone and email on setup, presets, consumables and nozzle selection
Compare IPG LightWELD Models
Spec
LightWELD 1000
LightWELD 1500
LightWELD 1500 XC
LightWELD 1500 XR
LightWELD 2000 XR
Welding power
1,000 W
1,500 W
1,500 W
1,500 W
2,000 W
Peak power
1,250 W (cleaning option)
2,500 W
2,500 W
2,500 W
3,000 W
Dedicated laser cleaning
Optional
No
Yes, up to 15 mm
Yes, up to 15 mm
Yes, up to 15 mm
Steels (single side)
up to 0.156" (9 ga)
up to 4 mm (0.157")
up to 4 mm (0.157")
up to 0.234" (4 ga)
up to 0.313" (0 ga)
Aluminum 3 & 5 series
up to 0.129" (8 ga)
up to 4 mm (0.157")
up to 4 mm (0.157")
up to 0.229" (3 ga)
up to 0.325" (0 ga)
Copper
Not rated
Not rated
up to 1 mm (0.039")
up to 0.081" (12 ga)
up to 0.129" (8 ga)
Titanium / nickel alloy
Not rated
Not rated
Not rated
up to 0.203" (6 ga)
Ti 0.234" / Ni 0.281"
Choose the LightWELD 1500 XR if you weld thicker sections, copper, titanium or nickel alloys, where the XR's 60 µm spot and higher energy density widen the process window.
Choose the LightWELD 1500 XC if you want 1,500 W welding plus dedicated pre- and post-weld laser cleaning in one unit, on material up to 4 mm. Choose the LightWELD 2000 XR if you regularly weld 5/16" steel or aluminum, or want the fastest travel speeds and the widest material range in the LightWELD line.
Frequently Asked Questions about the IPG LightWELD 1500 XR
Q: What does XR mean on the LightWELD 1500 XR?
A: XR stands for eXtended Range. The XR uses a 60 µm spot instead of 150 µm, giving more than 6X the energy density at the same 1,500 W, which extends thickness and material capability.
Q: What materials and thicknesses can the LightWELD 1500 XR weld?
A: IPG rates it for steels up to 0.234", 3/5 series aluminum up to 0.229", 6 series aluminum up to 0.204", nickel alloys and titanium up to 0.203", and copper up to 0.081".
Q: What's the difference between the 1500 XR and the 2000 XR?
A: The 2000 XR adds 500 W (over 30% more power) and 3,000 W peak, extending steels to 0.313", aluminum to 0.325", titanium to 0.234", nickel alloys to 0.281" and copper to 0.129". IPG positions the 1500 XR for longer welds on typically thinner material and the 2000 XR for thicker, deeper work.
Q: Does the 1500 XR include laser cleaning?
A: Yes. It cleans up to 15 mm wide at 2,500 W peak, with three cleaning nozzles and preset cleaning modes included.
Q: Is the LightWELD 1500 XR faster than TIG?
A: IPG rates LightWELD at up to 4X faster than TIG; IPG's XR launch video cites 3X to 5X faster than traditional techniques.
Q: Can the LightWELD weld with filler wire?
A: Yes. All LightWELD models support wire welding with IPG's optional wire feeder, which takes 0.030"–0.063" (0.8–1.6 mm) wire at 15–230 ipm. Wire adds bead size and bridges gaps on parts with poor fit-up.
Q: What power and gas does a LightWELD need?
A: LightWELD systems run on 220 V single-phase power and standard shielding gas: argon, nitrogen or an argon + CO2 mix. Laser power, gas and gun control run through a single cable from the base unit, so setup is plugging in power and gas and attaching the work clamp.
Q: Is the LightWELD safe to use in a shop?
A: It is a Class 4 laser, so it must be used inside a controlled laser area with laser-rated PPE. IPG builds in a key switch, E-stop, a fiber delivery interlock, a 2-step trigger, a part-contact interlock that only lets the laser fire when the nozzle touches the part, plume detection that shuts the laser off if no weld is forming, and a door interlock circuit. A laser welding helmet with IR shield and OD 6+ laser safety glasses are included.
Q: Can the LightWELD 1500 XR be automated?
A: Yes. It is compatible with the LightWELD Cobot System, which IPG says can be taught by hand-guiding with no coding.
Q: Is the IPG warranty valid when I buy through The Maker's Chest?
A: Yes. The Maker's Chest buys LightWELD systems directly from IPG Photonics, and every new unit carries IPG's 1-year standard warranty. IPG also offers an optional LightSHIELD one-year warranty extension.
Q: What is the return policy on a LightWELD?
A: Purchases from The Maker's Chest include our 75-day return window. If the LightWELD is not the right fit for your shop, contact us within 75 days to arrange a return.
Q: Why buy a LightWELD from The Maker's Chest?
A: You get a new, factory-warranted LightWELD sourced directly from IPG with a 75-day return window, plus a U.S. team that helps you pick the right model for your materials and thicknesses before you buy, and then supports laser-area setup, PPE, presets, nozzle selection and warranty coordination with IPG afterward.
Specifications
IPG LightWELD 1500 XR Specifications:
Laser Power (Welding)
Up to 1,500 W
Peak Power (Cleaning)
Up to 2,500 W
Laser Type
Air-cooled ytterbium CW fiber laser, 1070 nm
Spot Size
60 µm
Steels
Up to 0.234" (4 gauge)
Aluminum 3 & 5 Series
Up to 0.229" (3 gauge)
Aluminum 6 Series
Up to 0.204" (4 gauge)
Nickel Alloy / Titanium
Up to 0.203" (6 gauge)
Copper
Up to 0.081" (12 gauge)
Wobble Welding Width
Up to 0.200" (5 mm)
Cleaning Width
Up to 0.600" (15 mm)
Wire Welding
Yes, with optional IPG wire feeder
Input Power
220 V single-phase, 50/60 Hz, <30 A
Cooling
Air-cooled (no chiller)
Process Gas
Argon, nitrogen, or argon + CO2 mix
Gun Cable
10 m (32 ft), laser, gas and gun control in one cable
Connectivity
Ethernet web interface for advanced parameter settings
IPG LightWELD 1500 XR comes with IPG Photonics' 1-year standard warranty.
75-day return window on purchases from The Maker's Chest.
IPG offers an optional LightSHIELD one-year warranty extension.
Dedicated, local US-based support from The Maker's Chest, with warranty service coordinated through IPG Photonics in Massachusetts.
Shipping
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
BOFA Fume Extractor and Replacement Filters
Carbide 3D CNC Routers
Crio DTF Printers
Filtrabox Fume Extractors and Replacement Filters
FumeDog Fume Extractors
GravoTech Laser Engravers
Maxce IndexX Laser Marking Production Table
OneLaser XRF, Hydra, Cobra Series
PiBurn Laser Rotary Accessories
Sunstone Welders and Accessories
THEO Laser Welders
HantenCNC Laser Cleaners
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
More Penetration From the Same 1,500 W — a 60 µm Spot With Over 6X the Energy Density
The LightWELD 1500 XR welds steels up to 0.234", aluminum up to 0.229", titanium and nickel alloys up to 0.203" and copper up to 0.081", and laser-cleans up to 15 mm wide at 2,500 W peak.
Power is only half the story in laser welding. What decides penetration on thick sections, and whether copper or titanium welds reliably at all, is how tightly that power is focused. The IPG LightWELD 1500 XR (eXtended Range) keeps the 1,500 W platform but shrinks the spot to 60 µm, versus 150 µm on the 1500 and 1500 XC, giving more than 6X the energy density.
That makes thicker steel and aluminum easier and faster to penetrate, adds finesse on thin material, and opens a wider process window on difficult metals. The XR also includes full laser cleaning, so it is a weld, prep and finish system in one air-cooled, made-in-USA unit.
Weld Thicker Sections With a Smaller, Hotter Spot
Concentrating 1,500 W into a 60 µm spot drives a deeper keyhole than the same power spread over 150 µm. IPG rates the XR for single-sided welds in steels up to 0.234" (4 gauge), 3 and 5 series aluminum up to 0.229" (3 gauge) and 6 series aluminum up to 0.204" (4 gauge), well beyond the 4 mm limit of the 1500 and XC. The smaller spot also shrinks the heat-affected zone, so there is less distortion of the surrounding surface on both thick and thin parts.
Weld Copper, Titanium and Nickel Alloys
Copper reflects most laser light and pulls heat away fast; titanium and nickel alloys punish inconsistent heat input. The XR's higher energy density gives a wider process window on these materials. IPG rates it for titanium and nickel alloys up to 0.203" (6 gauge) and copper up to 0.081" (12 gauge). For shops doing busbars, heat exchangers, aerospace brackets or exhaust components, that capability is usually the reason to choose the XR over the 1500 XC.
Laser-Clean Before and After Every Weld
The XR includes dedicated cleaning with 2,500 W high-frequency peak power and a cleaning width up to 15 mm (0.600"). Pre-weld cleaning removes grease, oil, rust and excess oxide from the joint; post-weld cleaning removes soot, weld debris and discoloration from the seam. Switching between welding and cleaning is as simple as changing the nozzle, and three cleaning nozzles plus preset cleaning modes are included.
Weld Up to 4X Faster Than TIG With Wobble and Presets
IPG rates LightWELD at up to 4X faster than TIG. The XR's wobble welding adds up to 0.200" (5 mm) of weld width to bridge fit-up gaps and produce smooth cosmetic beads, and factory presets for welding and cleaning give new operators a validated starting point for each material and thickness. Advanced users can customize and save presets so results stay consistent across shifts.
Air-Cooled, 220 V, and Ready to Automate
The XR base unit is air-cooled, measures 641 × 316 × 534 mm (25.2 × 12.4 × 21 in) and weighs 53 kg (118 lb). It runs on 220 V single-phase with standard argon, nitrogen or argon/CO2 gas, and one 10 m (32 ft) cable carries laser, gas and gun control. When volume justifies it, the XR is compatible with the LightWELD Cobot System, which IPG says can be taught by hand-guiding in minutes with no coding.
IPG's Layered Safety System
The XR uses the same Class 4 safety architecture as the rest of the line: key switch, E-stop, fiber delivery interlock, 2-step trigger, a part-contact interlock so the laser only fires with the nozzle on the part, plume detection that cuts power if no weld forms, and a door interlock circuit. A laser welding helmet with IR shield and OD 6+ glasses are included.
Who the LightWELD 1500 XR Is Built For
Fabricators welding 3/16" to 1/4" steel and aluminum by hand
Electrical and thermal manufacturers welding copper
Aerospace, motorsport and exhaust shops working in titanium and nickel alloys
Shops that clean and weld at one station to cut finishing time
Operations planning cobot automation on the LightWELD platform
What's in the Box
IPG LightWELD 1500 XR air-cooled base unit
10 m (32 ft) IPG laser welding gun cable (laser, gas and gun control in one cable)
10 m (32 ft) workpiece clamp
(4) welding nozzle tips
(3) cleaning nozzle tips and weld head nozzle cleaning attachment
Pre-set cleaning mode software
(5) cover slides
Laser welding helmet with IR shield
Laser safety glasses, OD 6+
3 m (10 ft) CAT 6 Ethernet cable
Getting Started Guide
Specifications
Laser Power (Welding)
Up to 1,500 W
Peak Power (Cleaning)
Up to 2,500 W
Laser Type
Air-cooled ytterbium CW fiber laser, 1070 nm
Spot Size
60 µm
Steels
Up to 0.234" (4 gauge)
Aluminum 3 & 5 Series
Up to 0.229" (3 gauge)
Aluminum 6 Series
Up to 0.204" (4 gauge)
Nickel Alloy / Titanium
Up to 0.203" (6 gauge)
Copper
Up to 0.081" (12 gauge)
Wobble Welding Width
Up to 0.200" (5 mm)
Cleaning Width
Up to 0.600" (15 mm)
Wire Welding
Yes, with optional IPG wire feeder
Input Power
220 V single-phase, 50/60 Hz, <30 A
Cooling
Air-cooled (no chiller)
Process Gas
Argon, nitrogen, or argon + CO2 mix
Gun Cable
10 m (32 ft), laser, gas and gun control in one cable
Connectivity
Ethernet web interface for advanced parameter settings
The IPG LightWELD 1500 XR is made in the USA by IPG Photonics and ships with IPG's 1-year standard warranty. Purchases from The Maker's Chest include our 75-day return window.
The Maker's Chest Difference
🇺🇸 Bought directly from IPG Photonics: The Maker's Chest holds a direct IPG account, so your LightWELD ships new from IPG with IPG's factory warranty
🛠️ IPG's 1-year standard warranty, with The Maker's Chest coordinating warranty service with IPG's U.S. team in Massachusetts
↩️ 75-day return window on every LightWELD bought through The Maker's Chest
🔍 XR or 2000 XR? Tell us your thickest steel, aluminum and copper joints and we will tell you whether the 1500 XR covers them or whether the 2000 XR is worth the step up
🔬 Copper and titanium setup help: nozzle selection, gas choice and preset starting points for reflective and reactive metals
🧯 Laser-safe shop planning: we help you set up a controlled laser area, door interlocks, PPE and fume extraction before the machine arrives
💬 U.S.-based support from The Maker's Chest by phone and email on setup, presets, consumables and nozzle selection
Compare IPG LightWELD Models
Spec
LightWELD 1000
LightWELD 1500
LightWELD 1500 XC
LightWELD 1500 XR
LightWELD 2000 XR
Welding power
1,000 W
1,500 W
1,500 W
1,500 W
2,000 W
Peak power
1,250 W (cleaning option)
2,500 W
2,500 W
2,500 W
3,000 W
Dedicated laser cleaning
Optional
No
Yes, up to 15 mm
Yes, up to 15 mm
Yes, up to 15 mm
Steels (single side)
up to 0.156" (9 ga)
up to 4 mm (0.157")
up to 4 mm (0.157")
up to 0.234" (4 ga)
up to 0.313" (0 ga)
Aluminum 3 & 5 series
up to 0.129" (8 ga)
up to 4 mm (0.157")
up to 4 mm (0.157")
up to 0.229" (3 ga)
up to 0.325" (0 ga)
Copper
Not rated
Not rated
up to 1 mm (0.039")
up to 0.081" (12 ga)
up to 0.129" (8 ga)
Titanium / nickel alloy
Not rated
Not rated
Not rated
up to 0.203" (6 ga)
Ti 0.234" / Ni 0.281"
Choose the LightWELD 1500 XR if you weld thicker sections, copper, titanium or nickel alloys, where the XR's 60 µm spot and higher energy density widen the process window.
Choose the LightWELD 1500 XC if you want 1,500 W welding plus dedicated pre- and post-weld laser cleaning in one unit, on material up to 4 mm. Choose the LightWELD 2000 XR if you regularly weld 5/16" steel or aluminum, or want the fastest travel speeds and the widest material range in the LightWELD line.
Frequently Asked Questions about the IPG LightWELD 1500 XR
Q: What does XR mean on the LightWELD 1500 XR?
A: XR stands for eXtended Range. The XR uses a 60 µm spot instead of 150 µm, giving more than 6X the energy density at the same 1,500 W, which extends thickness and material capability.
Q: What materials and thicknesses can the LightWELD 1500 XR weld?
A: IPG rates it for steels up to 0.234", 3/5 series aluminum up to 0.229", 6 series aluminum up to 0.204", nickel alloys and titanium up to 0.203", and copper up to 0.081".
Q: What's the difference between the 1500 XR and the 2000 XR?
A: The 2000 XR adds 500 W (over 30% more power) and 3,000 W peak, extending steels to 0.313", aluminum to 0.325", titanium to 0.234", nickel alloys to 0.281" and copper to 0.129". IPG positions the 1500 XR for longer welds on typically thinner material and the 2000 XR for thicker, deeper work.
Q: Does the 1500 XR include laser cleaning?
A: Yes. It cleans up to 15 mm wide at 2,500 W peak, with three cleaning nozzles and preset cleaning modes included.
Q: Is the LightWELD 1500 XR faster than TIG?
A: IPG rates LightWELD at up to 4X faster than TIG; IPG's XR launch video cites 3X to 5X faster than traditional techniques.
Q: Can the LightWELD weld with filler wire?
A: Yes. All LightWELD models support wire welding with IPG's optional wire feeder, which takes 0.030"–0.063" (0.8–1.6 mm) wire at 15–230 ipm. Wire adds bead size and bridges gaps on parts with poor fit-up.
Q: What power and gas does a LightWELD need?
A: LightWELD systems run on 220 V single-phase power and standard shielding gas: argon, nitrogen or an argon + CO2 mix. Laser power, gas and gun control run through a single cable from the base unit, so setup is plugging in power and gas and attaching the work clamp.
Q: Is the LightWELD safe to use in a shop?
A: It is a Class 4 laser, so it must be used inside a controlled laser area with laser-rated PPE. IPG builds in a key switch, E-stop, a fiber delivery interlock, a 2-step trigger, a part-contact interlock that only lets the laser fire when the nozzle touches the part, plume detection that shuts the laser off if no weld is forming, and a door interlock circuit. A laser welding helmet with IR shield and OD 6+ laser safety glasses are included.
Q: Can the LightWELD 1500 XR be automated?
A: Yes. It is compatible with the LightWELD Cobot System, which IPG says can be taught by hand-guiding with no coding.
Q: Is the IPG warranty valid when I buy through The Maker's Chest?
A: Yes. The Maker's Chest buys LightWELD systems directly from IPG Photonics, and every new unit carries IPG's 1-year standard warranty. IPG also offers an optional LightSHIELD one-year warranty extension.
Q: What is the return policy on a LightWELD?
A: Purchases from The Maker's Chest include our 75-day return window. If the LightWELD is not the right fit for your shop, contact us within 75 days to arrange a return.
Q: Why buy a LightWELD from The Maker's Chest?
A: You get a new, factory-warranted LightWELD sourced directly from IPG with a 75-day return window, plus a U.S. team that helps you pick the right model for your materials and thicknesses before you buy, and then supports laser-area setup, PPE, presets, nozzle selection and warranty coordination with IPG afterward.
Specifications
IPG LightWELD 1500 XR Specifications:
Laser Power (Welding)
Up to 1,500 W
Peak Power (Cleaning)
Up to 2,500 W
Laser Type
Air-cooled ytterbium CW fiber laser, 1070 nm
Spot Size
60 µm
Steels
Up to 0.234" (4 gauge)
Aluminum 3 & 5 Series
Up to 0.229" (3 gauge)
Aluminum 6 Series
Up to 0.204" (4 gauge)
Nickel Alloy / Titanium
Up to 0.203" (6 gauge)
Copper
Up to 0.081" (12 gauge)
Wobble Welding Width
Up to 0.200" (5 mm)
Cleaning Width
Up to 0.600" (15 mm)
Wire Welding
Yes, with optional IPG wire feeder
Input Power
220 V single-phase, 50/60 Hz, <30 A
Cooling
Air-cooled (no chiller)
Process Gas
Argon, nitrogen, or argon + CO2 mix
Gun Cable
10 m (32 ft), laser, gas and gun control in one cable
Connectivity
Ethernet web interface for advanced parameter settings
IPG LightWELD 1500 XR comes with IPG Photonics' 1-year standard warranty.
75-day return window on purchases from The Maker's Chest.
IPG offers an optional LightSHIELD one-year warranty extension.
Dedicated, local US-based support from The Maker's Chest, with warranty service coordinated through IPG Photonics in Massachusetts.
Shipping
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
BOFA Fume Extractor and Replacement Filters
Carbide 3D CNC Routers
Crio DTF Printers
Filtrabox Fume Extractors and Replacement Filters
FumeDog Fume Extractors
GravoTech Laser Engravers
Maxce IndexX Laser Marking Production Table
OneLaser XRF, Hydra, Cobra Series
PiBurn Laser Rotary Accessories
Sunstone Welders and Accessories
THEO Laser Welders
HantenCNC Laser Cleaners
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.