Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content
OneLaser XRF 38W RF desktop CO2 laser compared with the Glowforge Pro 45W glass tube laser

OneLaser XRF vs Glowforge Pro: Which Desktop CO2 Laser Should You Buy?

Short answer: choose the OneLaser XRF ($4,499) if you want more capability for less money: an RF tube with a 0.07mm spot, a larger 600 x 300mm bed, 1,200 mm/s engraving, rotary support, offline LightBurn control and a 3-year warranty. Choose the Glowforge Pro ($5,999) if the simplest possible experience matters most: its browser-based app, camera-driven placement and 20-inch pass-through slot make it very approachable, at the cost of a smaller bed, a cloud-dependent workflow and no rotary. For most buyers comparing these two, the XRF is the stronger machine per dollar. Prices are as of publish time and subject to change.

Table of Contents

OneLaser XRF vs Glowforge Pro Specifications

Specification OneLaser XRF Glowforge Pro
Price $4,499 ($4,999 with Base Boost riser) $5,999 (Pro HD $6,999)
Laser source 38W RF metal tube 45W glass tube
Cooling Air-cooled Built-in closed-loop liquid cooling
Work area 600 x 300mm (23.6" x 11.8") About 19.5" x 11"
Pass-through With Base Boost riser 20" wide slot, unlimited length
Max material height Tall objects and rotaries (more with Base Boost) Up to 2"
Max speed 1,200 mm/s, 3G Not published in mm/s
Resolution / spot Up to 2,000 DPI; 0.07mm spot Up to 1,355 DPI
Camera / focus 5MP camera, XFocus autofocus, red dot Lid camera with app-based placement and autofocus
Software LightBurn and RDWorks, works offline; touchscreen and Wi-Fi Glowforge browser app, requires internet
Rotary Supported; PiBurn recommended No rotary option
Rated tube life Up to 30,000 hours Glass tube; check Glowforge's current terms
Machine warranty 3 years Check Glowforge's current terms

See the current OneLaser XRF and Glowforge Pro listings for live pricing and inclusions.

Laser Source: 38W RF vs 45W Glass

The headline wattage favors the Glowforge, but the tube type matters more. The XRF's RF metal tube produces a 0.07mm spot, roughly 3.5 times tighter than the ~0.25mm typical of a glass tube, and it switches on and off far faster. That shows up as crisper small text, cleaner photo engraving and the ability to hold detail at high speed. OneLaser rates the 38W RF as cutting roughly like a 55W to 60W glass tube, which puts it at least level with the Glowforge's 45W for typical 1/8" to 1/4" craft materials; treat that as a manufacturer guide and test your thickest stock.

The Glowforge Pro's 45W glass tube is a capable cutter for craft plywood, acrylic, leather and paper, and Glowforge's material presets make it easy to get consistent results on its own Proofgrade materials. For the full trade-off, see our RF vs glass CO2 laser tube guide.

Work Area, Height and Pass-Through

The XRF's 600 x 300mm bed is about 23.6" x 11.8", roughly 4 inches wider than the Glowforge Pro's ~19.5" x 11" usable area. That extra width helps when you nest batches of coasters, ornaments or keychains.

The Glowforge Pro's signature feature is its 20-inch pass-through slot, which lets you feed long boards and signs through the machine and engrave them in sections. Its 2" maximum material height is the main limit: thick items and anything cylindrical do not fit. The XRF handles taller objects and gains front-to-back pass-through and extra clearance with the Base Boost riser.

Software: LightBurn vs the Glowforge App

The Glowforge app

Glowforge runs entirely through a browser-based app. You drop a design onto a live camera view of the bed, pick a material preset and print. It is the easiest workflow in desktop lasers for a first-time user. The trade-off is that the machine needs an internet connection to run, advanced features sit behind a subscription, and you cannot use LightBurn.

LightBurn on the XRF

The XRF runs LightBurn and RDWorks locally, so jobs run with no internet dependency, and it has its own OneTouch+ touchscreen and Wi-Fi. LightBurn has a steeper learning curve than the Glowforge app but offers far more control over power, speed, layers, camera alignment, rotary jobs and batch production, and it is the standard across most of the laser industry.

Based on the calls our team fields every week, software is often the deciding factor in this comparison. If you want to open a lid and print with minimal learning, the Glowforge app is hard to beat. If you plan to grow into production or run more than one laser, LightBurn is the skill worth learning.

Tumblers and Rotary Work

This is the clearest functional gap. The Glowforge Pro has no rotary option, so tumblers, mugs, bottles and other cylinders are off the table. The XRF supports rotaries; pair it with a PiBurn rotary and the Base Boost riser for drinkware. If personalized tumblers are part of your business plan, that alone usually decides it. Our guide on how to laser engrave tumblers covers the setup.

Cooling, Warranty and Ownership

Neither machine needs an external chiller. The Glowforge cools its glass tube with a built-in closed-loop system, which works well in normal room temperatures but can pause jobs when the room gets hot. The XRF's RF tube is air-cooled, with no liquid to manage.

The XRF's RF tube is rated for up to 30,000 hours, while glass tubes lose power over time and are eventually replaced. The XRF carries a 3-year machine warranty; check Glowforge's current warranty terms for the Pro before comparing. Buying either through The Maker's Chest gives you our 75-day return window.

Price and Total Cost

At $4,499, the XRF costs $1,500 less than the Glowforge Pro ($5,999) and $2,500 less than the Pro HD ($6,999). Even adding the $500 Base Boost riser and a PiBurn rotary, an XRF drinkware-ready setup is typically in the same range as a Glowforge Pro without rotary capability. When comparing, include a LightBurn license on the XRF side and any Glowforge subscription on the other, plus extraction for both, as fumes still need venting or a fume extractor.

Based on our experience selling laser engravers to universities, schools and businesses of all sizes, we recommend comparing the complete setup you will actually run, including software, rotary and extraction, rather than the base machine price alone.

Choose the XRF if / Choose the Glowforge Pro if

Choose the OneLaser XRF if: you want finer engraving detail, a wider bed, faster engraving, rotary and tumbler capability, offline LightBurn control, a 3-year warranty and a lower price. It is the better fit for a growing personalization business.

Choose the Glowforge Pro if: the easiest possible software experience is your top priority, you regularly feed long boards through a 20-inch pass-through slot, and you do not need to engrave cylinders.

Weighing other options? See our Glowforge alternatives guide and our xTool vs Glowforge comparison.

Frequently Asked Questions

Is the OneLaser XRF better than the Glowforge Pro?

For most buyers, yes on capability per dollar: finer RF detail, a wider bed, rotary support, offline LightBurn and a longer warranty for $1,500 less. The Glowforge Pro is better if ease of use is your top priority.

Is 38W RF weaker than the Glowforge Pro's 45W?

Not in practice for most craft work. OneLaser rates its 38W RF as cutting roughly like a 55W to 60W glass tube, and RF engraves finer detail. Test your thickest material if heavy cutting matters.

Can the Glowforge Pro engrave tumblers?

No. The Glowforge Pro has no rotary option and a 2" height limit, so cylinders are not supported. The XRF works with a rotary.

Does the Glowforge Pro work with LightBurn?

No. Glowforge machines run only through Glowforge's own browser app. The XRF runs LightBurn and RDWorks.

Does the Glowforge need internet to work?

Yes. Its software runs in the cloud, so the machine needs an internet connection. The XRF runs locally.

Which has the bigger work area?

The XRF, at 600 x 300mm (23.6" x 11.8") versus about 19.5" x 11" on the Glowforge Pro. The Glowforge's 20" pass-through helps with long material.

Do either of these lasers need a water chiller?

No. The XRF is air-cooled, and the Glowforge Pro uses a built-in closed-loop cooling system.

Which is better for a beginner?

The Glowforge Pro is easier on day one. The XRF takes a little more learning but gives you more room to grow.

How much do the XRF and Glowforge Pro cost?

The XRF is $4,499, or $4,999 with the Base Boost riser. The Glowforge Pro is $5,999 and the Pro HD is $6,999.

Deciding between the XRF and a Glowforge? Call The Maker's Chest at 1-833-962-5377. We sell both and can help you choose based on what you make, or browse all OneLaser laser engravers.

Written By

Alina Oprea profile picture

Alina Oprea

Maker & Equipment Specialist

Alina Oprea is a hands-on maker, jeweler, and workshop specialist at The Maker’s Chest, with 25 years of silversmithing experience alongside a background in woodworking, renovations, construction, and commercial ductwork installation.

Her experience spans decorative woodwork, hand-carved doors, jewelry fabrication, homebuilding with Habitat, and real jobsite problem-solving — giving her a practical understanding of materials, tools, workflow, and what machines need to deliver beyond the spec sheet.

Previous article Do You Need a Chiller for a CO2 Laser? Sizing, Setup and Care
Next article RF vs Glass CO2 Laser Tubes: Which Is Worth It?
Skip the AI. Call an Expert. Skip the AI. Call an Expert.