The Herolaser 200W Pulsed Laser Cleaner Doubles Down on Power Without Adding a Single Gram At 200W of pulsed fiber output, this backpack-style clea...
View full details“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
Tired of grinding, sandblasting, or soaking parts in acid to get rust off? A laser rust removal machine uses a fiber laser beam to vaporize iron oxide layer by layer, so the steel underneath stays intact and there is no media to sweep up. Pulsed laser rust removers handle oxide layers up to roughly 200 microns, while continuous-wave units clear heavy corrosion fastest, bringing pitted parts back to bare, weld-ready metal.
At The Maker's Chest, we carry handheld laser rust removal machines from 100W to 6,000W, so you can match the laser rust remover to the job instead of overbuying. A 2,000W continuous laser rust cleaner is rated at 35 to 40 square meters per hour on light rust, with no blast media, chemicals, or water to dispose of. Shopping for a laser rust removal tool for sale? Our team will help you size the power to your rust thickness and daily workload.
Save $-9,600.00
The Herolaser 200W Pulsed Laser Cleaner Doubles Down on Power Without Adding a Single Gram At 200W of pulsed fiber output, this backpack-style clea...
View full details
Save $-9,500.00
Strip Rust, Paint, and Oil at 2000W — The Highest-Power Handheld Cleaner in the Herolaser Lineup, No Media or Chemicals Required The Herolaser 2000...
View full details
Save $-6,799.00
Herolaser 1500W Continuous Laser Cleaning Machine: Industrial Rust and Coating Removal for $6,799 Strip rust, paint, oil, and coatings from steel a...
View full detailsYes. A fiber laser removes rust because iron oxide absorbs the laser energy and vaporizes at a lower threshold than the steel underneath. The base metal is left intact rather than ground away, which is why restorers and fabricators use it on parts that cannot lose material. Results depend on matching power to rust thickness: light surface rust clears in a single pass, while deep pitting may take several passes or a higher-power continuous-wave machine.
It depends on the power tier. Pulsed laser rust removers in the 200W to 300W range typically handle oxide layers up to about 200 to 500 microns, while continuous-wave machines from 1,500W up move through heavy, flaking corrosion fastest. Rust measured in millimeters, such as long-neglected structural steel, is usually knocked down mechanically first and then finished with the laser for a clean, weld-ready surface.
Buy pulsed if the part is thin, finished, or valuable, and continuous-wave if it is thick steel where speed matters most. Pulsed lasers fire short, high-peak bursts that keep the part cool, so they will not warp sheet metal or discolor stainless. Continuous-wave lasers deliver steady power at a much lower cost per watt, which makes a 1,500W or 2,000W unit the faster and cheaper choice for frames, trailers, and heavy equipment.
For most rust jobs on steel, yes, because a laser removes only the rust and leaves the substrate and its profile alone. Sandblasting also removes some base metal, needs containment, and leaves spent media to clean up and dispose of. A laser needs no consumables beyond electricity and a protective lens. Sandblasting still wins on very large areas of thick coating where cost per square foot is the only priority.
Many can. Air-cooled pulsed units and several 1,500W to 2,000W continuous-wave cleaners run on standard 110V or 220V single-phase shop power, and most portable models plug into a 220V outlet like a welder. Water-cooled 3,000W and 6,000W systems are different: they typically need 380V three-phase industrial power, so confirm your electrical service before you order one.
You need laser safety glasses rated for the 1064 nm wavelength, plus fume extraction or good ventilation. Handheld laser cleaners are Class 4 lasers, so everyone in the work area needs wavelength-rated eye protection, not just the operator. Vaporized rust and coatings produce fine particulate, so a fume extractor or respirator is recommended, especially when removing old paint that may contain lead.
Shipping Insurance ($89)
placeholder