Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content

Filters

2000W+ Laser Welders

When most of your joints are 4mm and up, or you weld aluminum and copper every day, a 2000W laser welder pays for itself in travel speed. At 2000W, handheld fiber lasers reach about 5mm in a single pass on carbon and stainless steel, and 3000W to 4000W systems push further while welding thin material noticeably faster than 1500W machines.

At The Maker's Chest, our 2000W+ laser welders include the IPG LightWELD 2000 XR, THEO MA1 Ultra, Herolaser 2000W air-cooled, and DenaliWeld Jet 2000, Jet 3000 and the water-cooled CR 4000. If you're comparing a 2000W against a 3000W laser welder, choose 2000W for mixed fabrication and 3000W+ for thick sections and production. We'll help you size power, cooling and electrical service to your daily volume.

Need a 2000W or 3000W Laser Welder for Thick Metal?

Frequently Asked Questions

How thick can a 2000W laser welder weld?

A 2000W handheld fiber laser welds carbon steel and stainless steel up to about 5mm in a single pass, and thicker sections with double-sided welds or filler wire. On aluminum, it gives more consistent penetration at 3mm to 5mm than 1500W machines. A 3000W welder extends single-pass capacity further and runs faster on thin material, which matters most in production where every second of travel speed adds up.

Do I need 3000W or 4000W for production welding?

Only if your parts are thick or your volume is high. A 3000W to 4000W welder makes sense when you regularly weld 5mm+ steel or aluminum, need deeper penetration on structural joints, or want maximum travel speed on long production seams. For mixed fabrication under 5mm, 2000W covers most work at lower cost. Higher-power systems also need more electrical service and often water cooling, so factor in installation.

What power supply does a 2000W+ laser welder need?

Most 2000W handheld laser welders run on 220V to 240V single-phase or three-phase power, while 3000W and 4000W systems usually require three-phase service. Air-cooled 2000W models like the Herolaser 2000W and DenaliWeld Jet 2000 avoid a chiller, but check the amperage and phase on each product page before ordering. Many shops add a dedicated circuit or phase converter, which is cheaper to plan before delivery than after.

Skip the AI. Call an Expert. Skip the AI. Call an Expert.