“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
“I have never experienced customer service at this level with ANY other company serving ANY other market. … Fellow business owners, buy from The Makers Chest with confidence.”
Jeff S. · Business owner · Haotian MOPA laserGoogle review →
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Weld 3/8" Stainless and Aluminum at Production Speed — Without a Water Chiller
The DenaliWeld Jet 3000 delivers 3,000W of air-cooled fiber laser power, welds at up to 41.3 in/min, and holds a 100% duty cycle on 480V three-phase power — the most capacity you can get before stepping up to a water-cooled machine.
Once a fabrication shop moves past sheet metal into structural brackets, frames and thicker aluminum, a 1.5kW or 2kW handheld laser starts running out of headroom: welds need more passes, travel speed drops, and thicker joints stop fusing to the root. The usual answer is a water-cooled 3kW machine, which brings a chiller, coolant maintenance and a much bigger footprint. The Jet 3000 takes a different route. It reaches 3,000W from an air-cooled source, is rated for welds up to 3/8" stainless steel and aluminum, and still rolls on its own cart.
For a shop with three-phase service, that means one machine that covers sheet, plate and repair work at production speed, with the low distortion and clean bead that make laser welding attractive over TIG. DenaliWeld assembles the Jet 3000 in Elgin, Illinois and covers it with a 3-year parts and labor warranty.
Weld Thicker Sections in Fewer Passes
Laser power sets how deep the keyhole reaches and how fast the beam can travel while still fusing the root. The step from 2,000W to 3,000W lifts the Jet's rated capacity from 1/4" to 3/8" stainless and aluminum, and raises maximum welding speed from 35.4 to 41.3 in/min. Aluminum benefits most: it reflects and conducts heat away quickly, so extra power is what keeps the weld pool stable on thicker sections. On the shop floor, a joint that took two passes on a lower-power machine can often be closed in one, and long seams on thinner material run noticeably faster, which shortens every job rather than just the heavy ones.
Keep Full Power On All Day Without a Chiller to Maintain
DenaliWeld's patented CUAL mosaic laser source is rated for a 100% duty cycle and stable operation from -10°C to 40°C (14°F to 104°F). Its 976nm pump diodes convert about 45% of input power into laser light, by DenaliWeld's rating, against under 20% for traditional 915nm pumps, so far less waste heat has to be removed. That efficiency is what allows 3kW of output without a water chiller. Owners skip coolant changes, freeze protection and chiller repairs, and the welder can sit in a shop that is not heated overnight.
Prep, Weld and Clean the Seam With One Gun
The 3-in-1 laser head switches between welding, seam cleaning and remote cleaning. Use the cleaning modes to remove oxide from aluminum joints before welding, which cuts porosity, and to clear heat tint from stainless afterward without pickling paste or abrasive pads. A conventional cell needs a grinder, wire wheel and chemicals for the same steps. The head weighs about 900 g (1.98 lb), has its own air-cooled channel for long runs, and offers an optional physical emergency stop on the handle.
Lay Consistent Filler Without Hand-Feeding Rod
Thicker material usually means wider gaps and bigger fillets, which autogenous laser welding cannot fill. The Jet 3000 ships with an automatic push-pull wire feeder that handles wire from 0.8 mm to 2.0 mm (0.030" to 5/64") and supports double-wire feeding for wide joints. Filler arrives at a constant rate set from the controller, so bead size stays consistent from one end of a seam to the other, which a TIG welder dabbing rod by hand works hard to achieve.
Put Any Operator on Production Settings in One Click
The monitor and PLC control system stores presets by metal and thickness, so new operators start from proven parameters while experienced welders tune power, wobble width and frequency, PWM and wire feed. The welding log records weld time, power and speed for quality records and job costing. For a shop running multiple shifts, that means the second-shift operator welds with the same settings the first shift qualified, and the owner can see what each job actually consumed.
Add a Cobot Later Without Replacing the Laser
With DenaliWeld's ROBOX™ interface, the Jet 3000 switches between handheld welding and a cobot or robot cell at the push of a button. A shop can weld by hand while volumes are mixed, then automate a repeat part on the same laser source once the order book justifies it. That keeps a $35,000 investment working as the business grows, instead of turning it into a trade-in.
Get a U.S.-Assembled Machine With Domestic Parts Support
DenaliWeld is employee-owned, designs its own laser sources and control systems, and assembles in Illinois. The Jet 3000 carries SGS, CE (MD, EMC) and WPQR certification, and DenaliWeld stocks parts and consumables at its U.S. facility. Its modular construction means a fault is usually fixed by replacing one module under the guidance of DenaliWeld's technicians, which keeps downtime to days rather than weeks.
What's in the Box
DenaliWeld Jet 3000 air-cooled laser welding machine with 3-in-1 laser head and 10 m fiber cable
Machine cart
Single automatic wire feeder
10 protective lenses
Laser-safe welding helmet
Welding torch stand
Remote cleaning kit
Nozzle kit
Gas regulator
Specifications
Laser Power
3,000W
Laser Source
DenaliWeld patented CUAL mosaic fiber laser source
The DenaliWeld Jet 3000 is assembled in Elgin, Illinois, certified to SGS, CE (MD, EMC) and WPQR, and covered by DenaliWeld's 3-year parts and labor warranty, with a 75-day return window through The Maker's Chest. Download the Jet Series 3-in-1 user manual (PDF).
The Maker's Chest Difference
🇺🇸 Authorized DenaliWeld distributor: DenaliWeld's warranty covers new machines sold through authorized dealers only, so your 3-year coverage starts clean
🛠️ 3-year parts and labor warranty on the whole machine, with The Maker's Chest helping you work through any claim with DenaliWeld's U.S. tech support
↩️ 75-day return window on every DenaliWeld machine bought through The Maker's Chest, a level of protection DenaliWeld does not offer on direct purchases
⚡ Three-phase readiness check: we confirm your shop has 480V three-phase service before you order, since the Jet 3000 will not run on single-phase power
📏 Straight answers on sizing: we will tell you whether your material really needs 3kW or whether the Jet 2000 saves you $10,000
📦 Complete kit in one price: cart, wire feeder, helmet, torch stand, remote cleaning kit, nozzle kit, 10 lenses and regulator included
💬 U.S.-based help from The Maker's Chest on setup, consumables and laser safety planning, alongside DenaliWeld's own technicians
Compare the DenaliWeld Laser Welder Lineup
Spec
Jet 2000
Jet 3000
CR 4000
Laser power
2,000W
3,000W
4,000W
Cooling
Air-cooled
Air-cooled
External water chiller
Rated weld capacity
Up to 1/4" stainless and aluminum
Up to 3/8" stainless and aluminum
Not published by DenaliWeld
Max welding speed
0–35.4 in/min
0–41.3 in/min
Not published by DenaliWeld
Input power
220V single-phase, 35A
480V three-phase, 14A
380V three-phase (transformer included)
Wire feeder included
Single
Single
Dual
Cart included
Yes
Yes
No
Machine weight
Approx. 163 lb
Approx. 181 lb
Not published by DenaliWeld
Price
$24,999
$34,999
$45,999
Choose the Jet 2000 if most of your work is sheet and plate up to 1/4" and your shop runs on single-phase 220V power.
Choose the Jet 3000 if you regularly weld up to 3/8" stainless or aluminum and have 480V three-phase service available.
Choose the CR 4000 if you want the highest output in the lineup, dual-wire filling for wide joints, and a water-cooled system built around long production shifts.
Frequently Asked Questions about the DenaliWeld Jet 3000
Q: What's the difference between the Jet 3000 and the Jet 2000?
A: Both share the same air-cooled design, 3-in-1 head, controller and 10 m cable. The Jet 3000 adds 1,000W of power, raising rated capacity from 1/4" to 3/8" stainless and aluminum and top speed from 35.4 to 41.3 in/min. It needs 480V three-phase power, while the Jet 2000 runs on 220V single-phase.
Q: What's the difference between the Jet 3000 and the CR 4000?
A: The CR 4000 is DenaliWeld's water-cooled machine with 4,000W of output, a dual wire feeder, an external chiller and a transformer, priced at $45,999. The Jet 3000 is air-cooled, rolls on an included cart, and avoids chiller maintenance entirely.
Q: What electrical service does the Jet 3000 need?
A: The Jet 3000 requires AC 480V three-phase power, draws about 14A, and consumes roughly 9.2 kW. DenaliWeld recommends a licensed electrician wire welding circuits following NEC Article 630.
Q: How thick can the Jet 3000 weld?
A: DenaliWeld rates the Jet 3000 for welds up to 3/8" stainless steel and aluminum. Actual results depend on joint design, fit-up and filler; thick joints with gaps should use the wire feeder.
Q: Do I need a water chiller for a 3000W laser welder?
A: Not with the Jet 3000. Its air-cooled source is rated for a 100% duty cycle between -10°C and 40°C, so no external chiller, coolant or freeze protection is needed.
Q: Is the Jet 3000 hard to learn for a TIG or MIG welder?
A: Most welders adapt quickly. The one-click presets load parameters by metal and thickness, and the wire feeder removes the hand-coordination of feeding rod. DenaliWeld intends its machines for trained professional users and offers laser safety training.
Q: What safety equipment do I need?
A: The Jet 3000 is a Class 4 laser. Operators need laser-rated eye protection (a laser-safe helmet is included), and the weld area should be controlled with barriers or laser safety curtains. The machine adds a security lock and safety button.
Q: Is the warranty valid when I buy through The Maker's Chest?
A: Yes. The Maker's Chest is an authorized DenaliWeld distributor, so the 3-year parts and labor warranty applies in full. Repairs are handled at DenaliWeld's U.S. facility; shipping to and from it is the owner's responsibility.
Q: What is the return policy on the Jet 3000?
A: Purchases from The Maker's Chest include our 75-day return window. If the Jet 3000 is not the right fit for your shop, contact us within 75 days of delivery to arrange a return.
Q: Why buy the Jet 3000 from The Maker's Chest instead of directly from DenaliWeld?
A: You pay the same price, and the machine carries the same 3-year DenaliWeld warranty, because The Maker's Chest is an authorized distributor. You also get a 75-day return window, plus a U.S. team that helps you size the machine to your material and electrical service before you order, and that stays in the loop on setup and warranty questions after delivery.
Specifications
DenaliWeld Jet 3000 Specifications:
Laser Power
3,000W
Laser Source
DenaliWeld patented CUAL mosaic fiber laser source
The DenaliWeld Jet 3000 is covered by DenaliWeld's 3-year parts and labor warranty, which applies to the EZ, Jet and CR series when purchased new from an authorized distributor such as The Maker's Chest. Warranty repairs are performed at DenaliWeld's designated U.S. repair facility; shipping to and from the facility is the owner's responsibility. Fiber cables and laser heads are covered against manufacturing defects, while consumables such as protective lenses and nozzles are covered only for defects present at delivery.
Purchases from The Maker's Chest include our 75-day return window.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
BOFA Fume Extractor and Replacement Filters
Carbide 3D CNC Routers
Crio DTF Printers
Filtrabox Fume Extractors and Replacement Filters
FumeDog Fume Extractors
GravoTech Laser Engravers
Maxce IndexX Laser Marking Production Table
OneLaser X Series
OneLaser Hydra Series
PiBurn Laser Rotary Accessories
Sunstone Welders and Accessories
THEO Laser Welders
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
Why Buy From Us
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at The Maker's Chest.
✅ You get valuable bonuses with every purchase of a laser engraving machine that will add value to your entire business.
✅ Customers get exclusive access to the Materials Intelligence Library™, offering 550+ laser presets to get you started engraving.
✅ We offer a Lowest Price Guarantee. What does that mean? It means you are getting the lowest prices! If you find a lower price, call us!
✅ We offer FREE shipping* to the 48 contiguous United States and we've got a 75-day No Stress Returns Policy. We know that sometimes we change our minds, so our policy takes the stress out of your purchase.
✅ We offer local, US-based support that is available to guide you through your purchasing decisions. And we don't forget about you after that either!
✅ We're a family owned, small business. Our business is a reflection of ourselves, driven by strong values and a desire to do good for others.
We provide round the clockcustomer support. Even if we're not manning the phones late at night, you can reach out to us via email or chat on the website. Our official business hours are Monday - Friday, 9am - 5pm, but outside of these hours we're still here, and we'll get back to you as soon as we can!
Remember, we're always here to help, so give us a call on +1 833-962-5377, email us at support@themakerschest.com, or chat with us using the chat bubble in the bottom right corner of your screen.
Trusted by Government, Corporations & Universities
Weld 3/8" Stainless and Aluminum at Production Speed — Without a Water Chiller
The DenaliWeld Jet 3000 delivers 3,000W of air-cooled fiber laser power, welds at up to 41.3 in/min, and holds a 100% duty cycle on 480V three-phase power — the most capacity you can get before stepping up to a water-cooled machine.
Once a fabrication shop moves past sheet metal into structural brackets, frames and thicker aluminum, a 1.5kW or 2kW handheld laser starts running out of headroom: welds need more passes, travel speed drops, and thicker joints stop fusing to the root. The usual answer is a water-cooled 3kW machine, which brings a chiller, coolant maintenance and a much bigger footprint. The Jet 3000 takes a different route. It reaches 3,000W from an air-cooled source, is rated for welds up to 3/8" stainless steel and aluminum, and still rolls on its own cart.
For a shop with three-phase service, that means one machine that covers sheet, plate and repair work at production speed, with the low distortion and clean bead that make laser welding attractive over TIG. DenaliWeld assembles the Jet 3000 in Elgin, Illinois and covers it with a 3-year parts and labor warranty.
Weld Thicker Sections in Fewer Passes
Laser power sets how deep the keyhole reaches and how fast the beam can travel while still fusing the root. The step from 2,000W to 3,000W lifts the Jet's rated capacity from 1/4" to 3/8" stainless and aluminum, and raises maximum welding speed from 35.4 to 41.3 in/min. Aluminum benefits most: it reflects and conducts heat away quickly, so extra power is what keeps the weld pool stable on thicker sections. On the shop floor, a joint that took two passes on a lower-power machine can often be closed in one, and long seams on thinner material run noticeably faster, which shortens every job rather than just the heavy ones.
Keep Full Power On All Day Without a Chiller to Maintain
DenaliWeld's patented CUAL mosaic laser source is rated for a 100% duty cycle and stable operation from -10°C to 40°C (14°F to 104°F). Its 976nm pump diodes convert about 45% of input power into laser light, by DenaliWeld's rating, against under 20% for traditional 915nm pumps, so far less waste heat has to be removed. That efficiency is what allows 3kW of output without a water chiller. Owners skip coolant changes, freeze protection and chiller repairs, and the welder can sit in a shop that is not heated overnight.
Prep, Weld and Clean the Seam With One Gun
The 3-in-1 laser head switches between welding, seam cleaning and remote cleaning. Use the cleaning modes to remove oxide from aluminum joints before welding, which cuts porosity, and to clear heat tint from stainless afterward without pickling paste or abrasive pads. A conventional cell needs a grinder, wire wheel and chemicals for the same steps. The head weighs about 900 g (1.98 lb), has its own air-cooled channel for long runs, and offers an optional physical emergency stop on the handle.
Lay Consistent Filler Without Hand-Feeding Rod
Thicker material usually means wider gaps and bigger fillets, which autogenous laser welding cannot fill. The Jet 3000 ships with an automatic push-pull wire feeder that handles wire from 0.8 mm to 2.0 mm (0.030" to 5/64") and supports double-wire feeding for wide joints. Filler arrives at a constant rate set from the controller, so bead size stays consistent from one end of a seam to the other, which a TIG welder dabbing rod by hand works hard to achieve.
Put Any Operator on Production Settings in One Click
The monitor and PLC control system stores presets by metal and thickness, so new operators start from proven parameters while experienced welders tune power, wobble width and frequency, PWM and wire feed. The welding log records weld time, power and speed for quality records and job costing. For a shop running multiple shifts, that means the second-shift operator welds with the same settings the first shift qualified, and the owner can see what each job actually consumed.
Add a Cobot Later Without Replacing the Laser
With DenaliWeld's ROBOX™ interface, the Jet 3000 switches between handheld welding and a cobot or robot cell at the push of a button. A shop can weld by hand while volumes are mixed, then automate a repeat part on the same laser source once the order book justifies it. That keeps a $35,000 investment working as the business grows, instead of turning it into a trade-in.
Get a U.S.-Assembled Machine With Domestic Parts Support
DenaliWeld is employee-owned, designs its own laser sources and control systems, and assembles in Illinois. The Jet 3000 carries SGS, CE (MD, EMC) and WPQR certification, and DenaliWeld stocks parts and consumables at its U.S. facility. Its modular construction means a fault is usually fixed by replacing one module under the guidance of DenaliWeld's technicians, which keeps downtime to days rather than weeks.
What's in the Box
DenaliWeld Jet 3000 air-cooled laser welding machine with 3-in-1 laser head and 10 m fiber cable
Machine cart
Single automatic wire feeder
10 protective lenses
Laser-safe welding helmet
Welding torch stand
Remote cleaning kit
Nozzle kit
Gas regulator
Specifications
Laser Power
3,000W
Laser Source
DenaliWeld patented CUAL mosaic fiber laser source
The DenaliWeld Jet 3000 is assembled in Elgin, Illinois, certified to SGS, CE (MD, EMC) and WPQR, and covered by DenaliWeld's 3-year parts and labor warranty, with a 75-day return window through The Maker's Chest. Download the Jet Series 3-in-1 user manual (PDF).
The Maker's Chest Difference
🇺🇸 Authorized DenaliWeld distributor: DenaliWeld's warranty covers new machines sold through authorized dealers only, so your 3-year coverage starts clean
🛠️ 3-year parts and labor warranty on the whole machine, with The Maker's Chest helping you work through any claim with DenaliWeld's U.S. tech support
↩️ 75-day return window on every DenaliWeld machine bought through The Maker's Chest, a level of protection DenaliWeld does not offer on direct purchases
⚡ Three-phase readiness check: we confirm your shop has 480V three-phase service before you order, since the Jet 3000 will not run on single-phase power
📏 Straight answers on sizing: we will tell you whether your material really needs 3kW or whether the Jet 2000 saves you $10,000
📦 Complete kit in one price: cart, wire feeder, helmet, torch stand, remote cleaning kit, nozzle kit, 10 lenses and regulator included
💬 U.S.-based help from The Maker's Chest on setup, consumables and laser safety planning, alongside DenaliWeld's own technicians
Compare the DenaliWeld Laser Welder Lineup
Spec
Jet 2000
Jet 3000
CR 4000
Laser power
2,000W
3,000W
4,000W
Cooling
Air-cooled
Air-cooled
External water chiller
Rated weld capacity
Up to 1/4" stainless and aluminum
Up to 3/8" stainless and aluminum
Not published by DenaliWeld
Max welding speed
0–35.4 in/min
0–41.3 in/min
Not published by DenaliWeld
Input power
220V single-phase, 35A
480V three-phase, 14A
380V three-phase (transformer included)
Wire feeder included
Single
Single
Dual
Cart included
Yes
Yes
No
Machine weight
Approx. 163 lb
Approx. 181 lb
Not published by DenaliWeld
Price
$24,999
$34,999
$45,999
Choose the Jet 2000 if most of your work is sheet and plate up to 1/4" and your shop runs on single-phase 220V power.
Choose the Jet 3000 if you regularly weld up to 3/8" stainless or aluminum and have 480V three-phase service available.
Choose the CR 4000 if you want the highest output in the lineup, dual-wire filling for wide joints, and a water-cooled system built around long production shifts.
Frequently Asked Questions about the DenaliWeld Jet 3000
Q: What's the difference between the Jet 3000 and the Jet 2000?
A: Both share the same air-cooled design, 3-in-1 head, controller and 10 m cable. The Jet 3000 adds 1,000W of power, raising rated capacity from 1/4" to 3/8" stainless and aluminum and top speed from 35.4 to 41.3 in/min. It needs 480V three-phase power, while the Jet 2000 runs on 220V single-phase.
Q: What's the difference between the Jet 3000 and the CR 4000?
A: The CR 4000 is DenaliWeld's water-cooled machine with 4,000W of output, a dual wire feeder, an external chiller and a transformer, priced at $45,999. The Jet 3000 is air-cooled, rolls on an included cart, and avoids chiller maintenance entirely.
Q: What electrical service does the Jet 3000 need?
A: The Jet 3000 requires AC 480V three-phase power, draws about 14A, and consumes roughly 9.2 kW. DenaliWeld recommends a licensed electrician wire welding circuits following NEC Article 630.
Q: How thick can the Jet 3000 weld?
A: DenaliWeld rates the Jet 3000 for welds up to 3/8" stainless steel and aluminum. Actual results depend on joint design, fit-up and filler; thick joints with gaps should use the wire feeder.
Q: Do I need a water chiller for a 3000W laser welder?
A: Not with the Jet 3000. Its air-cooled source is rated for a 100% duty cycle between -10°C and 40°C, so no external chiller, coolant or freeze protection is needed.
Q: Is the Jet 3000 hard to learn for a TIG or MIG welder?
A: Most welders adapt quickly. The one-click presets load parameters by metal and thickness, and the wire feeder removes the hand-coordination of feeding rod. DenaliWeld intends its machines for trained professional users and offers laser safety training.
Q: What safety equipment do I need?
A: The Jet 3000 is a Class 4 laser. Operators need laser-rated eye protection (a laser-safe helmet is included), and the weld area should be controlled with barriers or laser safety curtains. The machine adds a security lock and safety button.
Q: Is the warranty valid when I buy through The Maker's Chest?
A: Yes. The Maker's Chest is an authorized DenaliWeld distributor, so the 3-year parts and labor warranty applies in full. Repairs are handled at DenaliWeld's U.S. facility; shipping to and from it is the owner's responsibility.
Q: What is the return policy on the Jet 3000?
A: Purchases from The Maker's Chest include our 75-day return window. If the Jet 3000 is not the right fit for your shop, contact us within 75 days of delivery to arrange a return.
Q: Why buy the Jet 3000 from The Maker's Chest instead of directly from DenaliWeld?
A: You pay the same price, and the machine carries the same 3-year DenaliWeld warranty, because The Maker's Chest is an authorized distributor. You also get a 75-day return window, plus a U.S. team that helps you size the machine to your material and electrical service before you order, and that stays in the loop on setup and warranty questions after delivery.
Specifications
DenaliWeld Jet 3000 Specifications:
Laser Power
3,000W
Laser Source
DenaliWeld patented CUAL mosaic fiber laser source
The DenaliWeld Jet 3000 is covered by DenaliWeld's 3-year parts and labor warranty, which applies to the EZ, Jet and CR series when purchased new from an authorized distributor such as The Maker's Chest. Warranty repairs are performed at DenaliWeld's designated U.S. repair facility; shipping to and from the facility is the owner's responsibility. Fiber cables and laser heads are covered against manufacturing defects, while consumables such as protective lenses and nozzles are covered only for defects present at delivery.
Purchases from The Maker's Chest include our 75-day return window.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
BOFA Fume Extractor and Replacement Filters
Carbide 3D CNC Routers
Crio DTF Printers
Filtrabox Fume Extractors and Replacement Filters
FumeDog Fume Extractors
GravoTech Laser Engravers
Maxce IndexX Laser Marking Production Table
OneLaser X Series
OneLaser Hydra Series
PiBurn Laser Rotary Accessories
Sunstone Welders and Accessories
THEO Laser Welders
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
Why Buy From Us
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at The Maker's Chest.
✅ You get valuable bonuses with every purchase of a laser engraving machine that will add value to your entire business.
✅ Customers get exclusive access to the Materials Intelligence Library™, offering 550+ laser presets to get you started engraving.
✅ We offer a Lowest Price Guarantee. What does that mean? It means you are getting the lowest prices! If you find a lower price, call us!
✅ We offer FREE shipping* to the 48 contiguous United States and we've got a 75-day No Stress Returns Policy. We know that sometimes we change our minds, so our policy takes the stress out of your purchase.
✅ We offer local, US-based support that is available to guide you through your purchasing decisions. And we don't forget about you after that either!
✅ We're a family owned, small business. Our business is a reflection of ourselves, driven by strong values and a desire to do good for others.
We provide round the clockcustomer support. Even if we're not manning the phones late at night, you can reach out to us via email or chat on the website. Our official business hours are Monday - Friday, 9am - 5pm, but outside of these hours we're still here, and we'll get back to you as soon as we can!
Remember, we're always here to help, so give us a call on +1 833-962-5377, email us at support@themakerschest.com, or chat with us using the chat bubble in the bottom right corner of your screen.
