The Herolaser 200W Pulsed Laser Cleaner Doubles Down on Power Without Adding a Single Gram At 200W of pulsed fiber output, this backpack-style clea...
View full details“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
Steel, stainless, aluminum, cast iron, copper, and brass all respond well to fiber laser cleaning, because the 1064 nm wavelength is absorbed by rust, oxide, oil, and paint far more readily than by clean metal. A metal laser cleaner strips those layers without abrasives, so surface finish, tolerances, and base material stay as they were. That makes laser metal cleaning a fit for machined parts, molds, and restoration work.
At The Maker's Chest, we carry laser cleaning machines for metal from 100W pulsed to 6,000W continuous-wave. Pulsed units are the safer laser for cleaning metal that is thin, polished, or heat-sensitive, such as aluminum and stainless, while continuous-wave machines clear heavy scale on carbon steel fastest. Whether you need a laser metal cleaner for pre-weld prep or a metal cleaning laser for production parts, we will help you match the laser type to your alloy.
Save $-9,600.00
The Herolaser 200W Pulsed Laser Cleaner Doubles Down on Power Without Adding a Single Gram At 200W of pulsed fiber output, this backpack-style clea...
View full details
Save $-9,500.00
Strip Rust, Paint, and Oil at 2000W — The Highest-Power Handheld Cleaner in the Herolaser Lineup, No Media or Chemicals Required The Herolaser 2000...
View full details
Save $-6,799.00
Herolaser 1500W Continuous Laser Cleaning Machine: Industrial Rust and Coating Removal for $6,799 Strip rust, paint, oil, and coatings from steel a...
View full detailsYes, but use a pulsed laser cleaner rather than a continuous-wave one. Aluminum conducts heat quickly and has a low melting point, so short pulses remove oxide and paint without melting or dulling the surface. Pulsed cleaning is also the standard way to strip the oxide layer before welding aluminum, which reduces porosity in the finished weld.
Yes. Laser cleaning removes rust stains, oil, and the blue and gold heat tint that welding leaves on stainless steel. It does this without the acids in pickling paste, and a low-energy pulsed setting leaves the surface bright. For food-grade or pharmaceutical work, verify that the cleaned surface meets your passivation specification before it goes into service.
Yes. Oil, grease, cutting fluid, and release agents burn off under the laser, which makes laser cleaning a fast degreasing step before welding, bonding, or coating. No solvents are needed, so there is no residue left in the weld zone. Heavy, pooled grease should be wiped off first, because a thick layer just absorbs energy and smokes before the surface underneath is clean.
At correct settings, a pulsed laser leaves the metal's surface profile essentially unchanged, which is the main difference from sandblasting. Higher-power continuous-wave settings can lightly texture steel, and some shops use that texture as a paint-ready anchor profile. If you need a specific roughness for a coating spec, test a sample and measure it before production.
Shipping Insurance ($89)
placeholder