All the RF Precision of the Pro Quantum — With the Extra Power That Serious Cutting Demands.
The OMTech Pro Quantum 80W RF is an 80W RF CO2 laser engraver and cutter — the higher-power variant of the Quantum 40 platform, delivering the same 0.07mm spot, 4200 mm/s speed, 8G acceleration, 48MP fisheye camera, built-in dual-pressure air compressor, and autofocus as the 60W, with the additional laser power that makes a measurable difference in cutting thickness, cutting speed on dense material, and sustained throughput in the most demanding production workloads.
For shops where the Pro Quantum 60W is the right machine but cutting capacity is the constraint — the 80W is the configuration that removes it.
Compatible Materials:
Wood
MDF / Plywood
Leather
Plastics
Fabric
Stone
Coated Metals
Glass
Why 80W Over 60W — The Honest Production Difference
Both the 60W and 80W Pro Quantum use the same RF tube technology, the same 0.07mm spot, the same 4200 mm/s maximum engraving speed, the same 8G acceleration, the same 48MP camera, the same built-in compressor, and the same platform. Buying the 80W instead of the 60W does not make the machine faster on engraving passes — the speed ceiling is identical.
What 80W adds is cutting power — specifically at the thicker end of the material range that this machine's built-in compressor is designed to support.
At 60W: The machine handles wood and acrylic cutting across most commercial production ranges cleanly. For shops where typical cutting stock is 6–12mm, the 60W provides good throughput and clean edge quality at the stated performance levels.
At 80W: The additional laser power delivers more cutting energy per unit time — which translates to faster single-pass cutting on 15–22mm wood and 18–24mm acrylic, cleaner cut faces at equivalent speeds on dense material, and more comfortable operating headroom during sustained high-power cutting sessions where the 60W tube might need multiple passes or reduced speed.
The product page states cutting performance of up to 22mm wood and 24mm acrylic — and at 80W, reaching those upper limits is more achievable and more consistent in production conditions than at 60W.
For a shop whose primary work is engraving at high speed with occasional light cutting — the 60W is the practical starting point. For a shop where thick-material cutting is a significant daily production activity and throughput on that cutting directly affects revenue — the 80W is the correct specification.
The RF Advantage — Every Specification That Doesn't Change Between 60W and 80W
The fundamental RF technology advantages that define what a Pro Quantum is — and that remain identical whether you choose 60W or 80W:
0.07mm laser spot. Where a standard glass CO2 tube produces a 0.25mm spot, the RF tube's spot is 3.5× finer. This is directly visible in fine-text legibility, logo edge sharpness, photorealistic portrait detail, and QR code cell definition. For a production shop where mark quality defines product value, the RF spot is the specification that most immediately differentiates output from what glass-tube machines produce.
4200 mm/s + 8G acceleration. Not just fast in a straight line — fast through direction changes. The 8G acceleration is what allows the machine to maintain meaningful speed across complex artwork, tight geometric fills, and detailed text patterns where lower-G machines decelerate significantly. OMTech states engraving throughput is 2× faster versus traditional glass CO2 systems. At 80W, that speed advantage applies to both engraving passes and cutting efficiency.
Built-in air cooling. No water required. RF tubes use integrated air cooling — no external water circuit, no chiller, no coolant management. For a production shop where infrastructure simplicity matters, eliminating water cooling from the equipment requirements is a real operational advantage over glass-tube alternatives.
Built-In Dual-Pressure Air Compressor — Production-Ready Cutting Without a Separate Pump
The Pro Quantum's integrated 30-liter dual-pressure air compressor automatically adjusts air pressure based on operation mode — lower pressure during engraving for clean marks with minimal material disruption, higher pressure during cutting for effective smoke clearance and clean kerf quality.
At 80W cutting thick wood and acrylic, the air assist is what makes the difference between a clean cut face and a charred edge. The compressor's automatic adjustment means the machine optimizes air flow for each operation type without manual intervention.
No external pump to purchase. No separate connections. No manual pressure adjustment between jobs. The 80W Pro Quantum ships production-ready on both cutting and engraving dimensions.
48MP Fisheye Camera + Autofocus — See Everything, Set Up Once
The 48MP ultra-HD fisheye camera renders the entire 39.4" × 23.6" working area in a single wide-angle view within RDWorks or LightBurn. At 48MP, the resolution is sufficient to position designs on small features and confirm alignment on irregular blanks before the laser fires.
For a production shop running batch layouts — 15 leather wallets, 20 wooden signs, 8 acrylic plaques — the camera positions and confirms every piece in the layout without individual measurement or test burns. This is where the camera's impact on daily throughput is most direct: less time on setup, more time on production.
Autofocus handles focal height automatically when material is placed. The combination of camera positioning and autofocus reduces the per-job setup routine to a sequence of confirmations rather than manual calibrations.
39.4" × 23.6" — Production-Scale Field at RF Quality
The 39.4" × 23.6" (1000 × 600mm) working area is significantly larger than the Polar 2's 28" × 14" bed, accommodating larger individual projects and more pieces per batch layout. At 80W and 4200 mm/s, this field processes at a rate that glass-tube machines in the same class cannot match.
Integrated 660 m3/h (390 CFM) exhaust fan — built-in smoke and fume extraction that keeps the working environment clean during sustained production. Connect the exhaust pipe to an external duct or inline filter.
Rotary axis compatible — three rotary axis options are available for cups, bottles, tumblers, tubes, and other cylindrical objects. The 80W Pro Quantum's production capability extends beyond flat material to a full cylindrical product range.
Monitoring, Optics, and Connectivity — Built for Professional Use
LED real-time display: Shows device status and operational information on the machine exterior — at-a-glance monitoring without navigating software.
Isolated optical path reflection: Maintains laser beam stability and reduces sensitivity to external vibration and environmental factors during high-speed operation — important for maintaining consistent mark quality across an 8-hour production shift.
Real-time mirror temperature monitoring: Tracks optical component temperature during sustained high-speed engraving and cutting — alerting operators before thermal damage to optics can occur.
Software: RDWorks bundled. LightBurn and CorelLaser compatible — LightBurn requires a separate license from Lightburn and is the preferred production interface for most users on Windows and macOS.
Connectivity: USB cable, Ethernet cable, and WiFi — Ethernet for stable high-throughput job transfer, WiFi for flexible placement.
FDA certified. 2-year machine warranty.
The Maker's Chest Difference
The OMTech Pro Quantum 80W RF is available from OMTech directly and from other resellers. Here's what changes when you order through The Maker's Chest:
🛡️ 75-day returns — significantly longer than OMTech's direct return window. Enough time to receive and set up the machine, run your actual production cutting and engraving loads, confirm the 80W output delivers what your business requires, and make a fully informed decision before you're locked in
🇺🇸 Expert USA-based technical support — our team can help with LightBurn and RDWorks setup, camera alignment workflow, rotary axis configuration, exhaust setup, and any production issues that arise during ramp-up
📞 Dual lines of support — phone and email, so when production is running and something needs attention, you have a direct path to a real person
🔧 Straight configuration guidance — 60W RF or 80W RF Pro Quantum? Not sure whether the extra cutting power justifies the step up for your specific daily job types? Tell us what you cut most often, at what thicknesses, and we'll give you a direct recommendation
Frequently Asked Questions About OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter
Q: What is the specific production difference between the 60W and 80W Pro Quantum? A: The engraving speed (4200 mm/s), acceleration (8G), spot size (0.07mm), camera (48MP), autofocus, compressor, and field size are identical. The difference is entirely in laser tube output power — which translates to cutting performance. At 80W, single-pass cutting on 15–22mm wood and 18–24mm acrylic is more consistent and faster than at 60W. For engraving-focused workflows where cutting is lighter, the 60W is the practical choice. For production shops where regular thick-material cutting is a core daily activity, the 80W removes the ceiling.
Q: Does the 80W need a water chiller? A: No. The RF tube uses built-in air cooling — no water chiller, no coolant, no plumbing. This is one of the most important operational simplicity advantages of RF tube technology over glass-tube alternatives at comparable or higher power levels.
Q: What is the maximum cutting thickness? A: The product page states cutting performance up to 22mm wood and 24mm acrylic. At 80W with the built-in dual-pressure air compressor operating, these upper limits are achievable in production conditions. Actual results vary by material species, density, and settings.
Q: Is the 80W Pro Quantum faster at engraving than the 60W? A: No — both are rated at 4200 mm/s maximum engraving speed with 8G acceleration. The speed and acceleration specifications are determined by the motion system, not the laser power. The 80W's advantage is cutting power and cutting throughput on thick material — not engraving cycle time.
Q: Is it compatible with macOS? A: Yes via LightBurn, which runs natively on macOS. RDWorks requires Windows. LightBurn is the preferred production interface for macOS users and is compatible with the Pro Quantum's controller. A separate LightBurn license is required from Lightburn.
Q: Can it engrave cylindrical objects like tumblers? A: Yes — three rotary axis options are available for cups, bottles, tumblers, tubes, jars, and other cylindrical objects. Available as optional add-ons at checkout.
Q: What does the 48MP fisheye camera do? A: It renders the full 39.4" × 23.6" working area in a single wide-angle view inside RDWorks or LightBurn — allowing you to position designs visually over actual materials before the laser fires. For batch production layouts where alignment on each piece matters, the camera preview eliminates the per-piece test burn and repositioning cycle that costs time and material on non-camera machines.
Q: How does the built-in compressor differ from an external air assist pump? A: The integrated 30-liter dual-pressure compressor is built into the machine — no external pump purchase, no additional connections, no manual pressure adjustment. It automatically selects lower pressure for engraving (clean marks, minimal disturbance) and higher pressure for cutting (effective smoke clearance, cleaner kerf). At 80W cutting thick stock, proper high-pressure air assist is what enables clean cut faces rather than charred edges.
Q: Why buy from The Maker's Chest instead of directly from OMTech? A: Our 75-day return window gives you real production evaluation time — significantly more than OMTech's direct policy — enough to run the 80W through your actual cutting and engraving production loads, confirm it delivers before you're locked in. Our USA-based expert support team is reachable by phone and email for LightBurn and RDWorks setup, camera workflow, rotary configuration, and production troubleshooting throughout your ownership. If you're choosing between 60W and 80W, we'll give you a straight recommendation based on your actual job types.
Specifications
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Specifications:
Product page displays 2-Year Warranty and two free virtual technical support sessions with purchase.
Warranty & Manuals
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Details:
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter comes with a 2-year warranty on the laser machines.
100% money back guarantee (minus shipping and handling costs) if you return your unit in like-new condition within 75 days of the ship date.
Dedicated, local US-based support for quick answers to questions.
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Product Manuals:
Click the links below to download product manuals for OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Product Manual Downloads:
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Product Manual Download
Shipping
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
OneLaser X Series Laser Engravers
OneLaser Hydra Series Laser Engravers
PiBurn Laser Rotary Accessories
Filtrabox Fume Extractors and Replacement Filters
BOFA Fume Extractors and Replacement Filters
Maxce IndexX Laser Marking Production Table
Theo Laser Welders
Crio DTF Printers
Sunstone Welders
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
Why Buy From Us
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at The Maker's Chest.
✅ You get valuable bonuses with every purchase of a laser engraving machine that will add value to your entire business.
✅ Customers get exclusive access to the Materials Intelligence Library™, offering 550+ laser presets to get you started engraving.
✅ We offer a Lowest Price Guarantee. What does that mean? It means you are getting the lowest prices! If you find a lower price, call us!
✅ We offer FREE shipping* to the 48 contiguous United States and we've got a 75-day No Stress Returns Policy. We know that sometimes we change our minds, so our policy takes the stress out of your purchase.
✅ We offer local, US-based support that is available to guide you through your purchasing decisions. And we don't forget about you after that either!
✅ We're a family owned, small business. Our business is a reflection of ourselves, driven by strong values and a desire to do good for others.
We provide round the clockcustomer support. Even if we're not manning the phones late at night, you can reach out to us via email or chat on the website. Our official business hours are Monday - Friday, 9am - 5pm, but outside of these hours we're still here, and we'll get back to you as soon as we can!
Remember, we're always here to help, so give us a call on +1 833-962-5377, email us at support@themakerschest.com, or chat with us using the chat bubble in the bottom right corner of your screen.
All the RF Precision of the Pro Quantum — With the Extra Power That Serious Cutting Demands.
The OMTech Pro Quantum 80W RF is an 80W RF CO2 laser engraver and cutter — the higher-power variant of the Quantum 40 platform, delivering the same 0.07mm spot, 4200 mm/s speed, 8G acceleration, 48MP fisheye camera, built-in dual-pressure air compressor, and autofocus as the 60W, with the additional laser power that makes a measurable difference in cutting thickness, cutting speed on dense material, and sustained throughput in the most demanding production workloads.
For shops where the Pro Quantum 60W is the right machine but cutting capacity is the constraint — the 80W is the configuration that removes it.
Compatible Materials:
Wood
MDF / Plywood
Leather
Plastics
Fabric
Stone
Coated Metals
Glass
Why 80W Over 60W — The Honest Production Difference
Both the 60W and 80W Pro Quantum use the same RF tube technology, the same 0.07mm spot, the same 4200 mm/s maximum engraving speed, the same 8G acceleration, the same 48MP camera, the same built-in compressor, and the same platform. Buying the 80W instead of the 60W does not make the machine faster on engraving passes — the speed ceiling is identical.
What 80W adds is cutting power — specifically at the thicker end of the material range that this machine's built-in compressor is designed to support.
At 60W: The machine handles wood and acrylic cutting across most commercial production ranges cleanly. For shops where typical cutting stock is 6–12mm, the 60W provides good throughput and clean edge quality at the stated performance levels.
At 80W: The additional laser power delivers more cutting energy per unit time — which translates to faster single-pass cutting on 15–22mm wood and 18–24mm acrylic, cleaner cut faces at equivalent speeds on dense material, and more comfortable operating headroom during sustained high-power cutting sessions where the 60W tube might need multiple passes or reduced speed.
The product page states cutting performance of up to 22mm wood and 24mm acrylic — and at 80W, reaching those upper limits is more achievable and more consistent in production conditions than at 60W.
For a shop whose primary work is engraving at high speed with occasional light cutting — the 60W is the practical starting point. For a shop where thick-material cutting is a significant daily production activity and throughput on that cutting directly affects revenue — the 80W is the correct specification.
The RF Advantage — Every Specification That Doesn't Change Between 60W and 80W
The fundamental RF technology advantages that define what a Pro Quantum is — and that remain identical whether you choose 60W or 80W:
0.07mm laser spot. Where a standard glass CO2 tube produces a 0.25mm spot, the RF tube's spot is 3.5× finer. This is directly visible in fine-text legibility, logo edge sharpness, photorealistic portrait detail, and QR code cell definition. For a production shop where mark quality defines product value, the RF spot is the specification that most immediately differentiates output from what glass-tube machines produce.
4200 mm/s + 8G acceleration. Not just fast in a straight line — fast through direction changes. The 8G acceleration is what allows the machine to maintain meaningful speed across complex artwork, tight geometric fills, and detailed text patterns where lower-G machines decelerate significantly. OMTech states engraving throughput is 2× faster versus traditional glass CO2 systems. At 80W, that speed advantage applies to both engraving passes and cutting efficiency.
Built-in air cooling. No water required. RF tubes use integrated air cooling — no external water circuit, no chiller, no coolant management. For a production shop where infrastructure simplicity matters, eliminating water cooling from the equipment requirements is a real operational advantage over glass-tube alternatives.
Built-In Dual-Pressure Air Compressor — Production-Ready Cutting Without a Separate Pump
The Pro Quantum's integrated 30-liter dual-pressure air compressor automatically adjusts air pressure based on operation mode — lower pressure during engraving for clean marks with minimal material disruption, higher pressure during cutting for effective smoke clearance and clean kerf quality.
At 80W cutting thick wood and acrylic, the air assist is what makes the difference between a clean cut face and a charred edge. The compressor's automatic adjustment means the machine optimizes air flow for each operation type without manual intervention.
No external pump to purchase. No separate connections. No manual pressure adjustment between jobs. The 80W Pro Quantum ships production-ready on both cutting and engraving dimensions.
48MP Fisheye Camera + Autofocus — See Everything, Set Up Once
The 48MP ultra-HD fisheye camera renders the entire 39.4" × 23.6" working area in a single wide-angle view within RDWorks or LightBurn. At 48MP, the resolution is sufficient to position designs on small features and confirm alignment on irregular blanks before the laser fires.
For a production shop running batch layouts — 15 leather wallets, 20 wooden signs, 8 acrylic plaques — the camera positions and confirms every piece in the layout without individual measurement or test burns. This is where the camera's impact on daily throughput is most direct: less time on setup, more time on production.
Autofocus handles focal height automatically when material is placed. The combination of camera positioning and autofocus reduces the per-job setup routine to a sequence of confirmations rather than manual calibrations.
39.4" × 23.6" — Production-Scale Field at RF Quality
The 39.4" × 23.6" (1000 × 600mm) working area is significantly larger than the Polar 2's 28" × 14" bed, accommodating larger individual projects and more pieces per batch layout. At 80W and 4200 mm/s, this field processes at a rate that glass-tube machines in the same class cannot match.
Integrated 660 m3/h (390 CFM) exhaust fan — built-in smoke and fume extraction that keeps the working environment clean during sustained production. Connect the exhaust pipe to an external duct or inline filter.
Rotary axis compatible — three rotary axis options are available for cups, bottles, tumblers, tubes, and other cylindrical objects. The 80W Pro Quantum's production capability extends beyond flat material to a full cylindrical product range.
Monitoring, Optics, and Connectivity — Built for Professional Use
LED real-time display: Shows device status and operational information on the machine exterior — at-a-glance monitoring without navigating software.
Isolated optical path reflection: Maintains laser beam stability and reduces sensitivity to external vibration and environmental factors during high-speed operation — important for maintaining consistent mark quality across an 8-hour production shift.
Real-time mirror temperature monitoring: Tracks optical component temperature during sustained high-speed engraving and cutting — alerting operators before thermal damage to optics can occur.
Software: RDWorks bundled. LightBurn and CorelLaser compatible — LightBurn requires a separate license from Lightburn and is the preferred production interface for most users on Windows and macOS.
Connectivity: USB cable, Ethernet cable, and WiFi — Ethernet for stable high-throughput job transfer, WiFi for flexible placement.
FDA certified. 2-year machine warranty.
The Maker's Chest Difference
The OMTech Pro Quantum 80W RF is available from OMTech directly and from other resellers. Here's what changes when you order through The Maker's Chest:
🛡️ 75-day returns — significantly longer than OMTech's direct return window. Enough time to receive and set up the machine, run your actual production cutting and engraving loads, confirm the 80W output delivers what your business requires, and make a fully informed decision before you're locked in
🇺🇸 Expert USA-based technical support — our team can help with LightBurn and RDWorks setup, camera alignment workflow, rotary axis configuration, exhaust setup, and any production issues that arise during ramp-up
📞 Dual lines of support — phone and email, so when production is running and something needs attention, you have a direct path to a real person
🔧 Straight configuration guidance — 60W RF or 80W RF Pro Quantum? Not sure whether the extra cutting power justifies the step up for your specific daily job types? Tell us what you cut most often, at what thicknesses, and we'll give you a direct recommendation
Frequently Asked Questions About OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter
Q: What is the specific production difference between the 60W and 80W Pro Quantum? A: The engraving speed (4200 mm/s), acceleration (8G), spot size (0.07mm), camera (48MP), autofocus, compressor, and field size are identical. The difference is entirely in laser tube output power — which translates to cutting performance. At 80W, single-pass cutting on 15–22mm wood and 18–24mm acrylic is more consistent and faster than at 60W. For engraving-focused workflows where cutting is lighter, the 60W is the practical choice. For production shops where regular thick-material cutting is a core daily activity, the 80W removes the ceiling.
Q: Does the 80W need a water chiller? A: No. The RF tube uses built-in air cooling — no water chiller, no coolant, no plumbing. This is one of the most important operational simplicity advantages of RF tube technology over glass-tube alternatives at comparable or higher power levels.
Q: What is the maximum cutting thickness? A: The product page states cutting performance up to 22mm wood and 24mm acrylic. At 80W with the built-in dual-pressure air compressor operating, these upper limits are achievable in production conditions. Actual results vary by material species, density, and settings.
Q: Is the 80W Pro Quantum faster at engraving than the 60W? A: No — both are rated at 4200 mm/s maximum engraving speed with 8G acceleration. The speed and acceleration specifications are determined by the motion system, not the laser power. The 80W's advantage is cutting power and cutting throughput on thick material — not engraving cycle time.
Q: Is it compatible with macOS? A: Yes via LightBurn, which runs natively on macOS. RDWorks requires Windows. LightBurn is the preferred production interface for macOS users and is compatible with the Pro Quantum's controller. A separate LightBurn license is required from Lightburn.
Q: Can it engrave cylindrical objects like tumblers? A: Yes — three rotary axis options are available for cups, bottles, tumblers, tubes, jars, and other cylindrical objects. Available as optional add-ons at checkout.
Q: What does the 48MP fisheye camera do? A: It renders the full 39.4" × 23.6" working area in a single wide-angle view inside RDWorks or LightBurn — allowing you to position designs visually over actual materials before the laser fires. For batch production layouts where alignment on each piece matters, the camera preview eliminates the per-piece test burn and repositioning cycle that costs time and material on non-camera machines.
Q: How does the built-in compressor differ from an external air assist pump? A: The integrated 30-liter dual-pressure compressor is built into the machine — no external pump purchase, no additional connections, no manual pressure adjustment. It automatically selects lower pressure for engraving (clean marks, minimal disturbance) and higher pressure for cutting (effective smoke clearance, cleaner kerf). At 80W cutting thick stock, proper high-pressure air assist is what enables clean cut faces rather than charred edges.
Q: Why buy from The Maker's Chest instead of directly from OMTech? A: Our 75-day return window gives you real production evaluation time — significantly more than OMTech's direct policy — enough to run the 80W through your actual cutting and engraving production loads, confirm it delivers before you're locked in. Our USA-based expert support team is reachable by phone and email for LightBurn and RDWorks setup, camera workflow, rotary configuration, and production troubleshooting throughout your ownership. If you're choosing between 60W and 80W, we'll give you a straight recommendation based on your actual job types.
Specifications
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Specifications:
Product page displays 2-Year Warranty and two free virtual technical support sessions with purchase.
Warranty & Manuals
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Details:
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter comes with a 2-year warranty on the laser machines.
100% money back guarantee (minus shipping and handling costs) if you return your unit in like-new condition within 75 days of the ship date.
Dedicated, local US-based support for quick answers to questions.
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Product Manuals:
Click the links below to download product manuals for OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Product Manual Downloads:
OMTech Pro Quantum 80W RF CO2 Laser Engraver and Cutter Product Manual Download
Shipping
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
OneLaser X Series Laser Engravers
OneLaser Hydra Series Laser Engravers
PiBurn Laser Rotary Accessories
Filtrabox Fume Extractors and Replacement Filters
BOFA Fume Extractors and Replacement Filters
Maxce IndexX Laser Marking Production Table
Theo Laser Welders
Crio DTF Printers
Sunstone Welders
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
Why Buy From Us
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at The Maker's Chest.
✅ You get valuable bonuses with every purchase of a laser engraving machine that will add value to your entire business.
✅ Customers get exclusive access to the Materials Intelligence Library™, offering 550+ laser presets to get you started engraving.
✅ We offer a Lowest Price Guarantee. What does that mean? It means you are getting the lowest prices! If you find a lower price, call us!
✅ We offer FREE shipping* to the 48 contiguous United States and we've got a 75-day No Stress Returns Policy. We know that sometimes we change our minds, so our policy takes the stress out of your purchase.
✅ We offer local, US-based support that is available to guide you through your purchasing decisions. And we don't forget about you after that either!
✅ We're a family owned, small business. Our business is a reflection of ourselves, driven by strong values and a desire to do good for others.
We provide round the clockcustomer support. Even if we're not manning the phones late at night, you can reach out to us via email or chat on the website. Our official business hours are Monday - Friday, 9am - 5pm, but outside of these hours we're still here, and we'll get back to you as soon as we can!
Remember, we're always here to help, so give us a call on +1 833-962-5377, email us at support@themakerschest.com, or chat with us using the chat bubble in the bottom right corner of your screen.
