Carbide 3D Nomad 4 Desktop CNC Mill
By Carbide 3D
โThe Makerโs Chest took the time to actually call me to check inโฆ Iโve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.โ
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
By Carbide 3D
โThe Makerโs Chest took the time to actually call me to check inโฆ Iโve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.โ
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Unlock Discount
Desktop CNC mills have always forced a trade-off: a machine small and clean enough for an office, lab or classroom usually stalls the moment you ask it to clear aluminum quickly. The Nomad 4 is Carbide 3D's answer, a ground-up redesign of the enclosed Nomad platform built around a full-size spindle and a motion system stiff enough to use it.
It is not a replacement for the Nomad 3. Carbide 3D describes it as the extreme version of a compact desktop mill, sharing the spindle of the Shapeoko 5 and the 36 V electronics of the HDM, while still fitting comfortably on a 2 x 2 foot bench. Every machine is assembled and tested in Carbide 3D's California shop.
The Nomad 4 replaces the Nomad 3's 130 W motor with a 1.2 kW VFD spindle, nearly ten times the power, running from 8,000 to 24,000 RPM. That headroom is what lets you run adaptive toolpaths in aluminum, brass and copper at productive feeds instead of creeping along to avoid a stall. The ER-16 collet system ships with 1/8", 1/4" and 3/8" collets, so you can step up to larger, stiffer endmills that remove more material per pass and leave a better finish than the small cutters a 130 W spindle limits you to.

Power only helps if the machine doesn't flex under it. Every axis runs on 16 mm ballscrews (10 mm pitch on X and Y, 5 mm on Z) instead of leadscrews, rated to +/- 0.002" per foot, and rides on back-mounted HG-15 linear rails on all three axes, where the Nomad 3 used round rods on X and Y. Back-mounting the rails presents a smooth face to the work area that keeps chips out of the bearings. Upgraded NEMA 23 motors on a 36 V system give the motion system the torque to keep pace with the spindle, and the frame uses billet aluminum components with no extrusions. With step lengths of 0.00025" on X/Y and 0.00012" on Z, the result is less deflection, tighter tolerances and repeatable parts on long runs.

The cutting envelope grows to 10" (X) x 8" (Y) x 3.5" (Z), about 45% more work volume than the Nomad 3's 8" x 8" x 3", with 3.75" of Z travel and 4" of clearance under the spindle. The table comes with a threaded 25 x 25 mm hole pattern built in, so you can bolt down a vise, clamps or your own fixtures on day one without buying a separate workholding plate. Larger windows let you watch the cut, and a redesigned door opens easily even when the machine sits under a shelf.
The controller and VFD live in an external electronics unit you can place away from the machine, which keeps them out of the chips and heat of the cutting area and makes servicing simpler. A Power Pendant on a 2-meter tether stops the machine instantly from anywhere on your bench. Built-in LED lighting illuminates the work, and a removable bottom cover lets you sweep debris straight through into a chip bin. For dust control, an optional attachment routes a 65 mm Sweepy V2 hose out of the enclosure with no modifications.

The Nomad 4 ships with a complete software suite, so there's nothing extra to license before your first cut. Carbide Create handles 2D CAD/CAM, Carbide Motion runs the machine with no license or internet connection, and MeshCAM V8 turns STL files into 3D toolpaths for the Nomad. You also get a redeemable Alibre Workshop license for 3D CAD (Windows only) and Carbide Copper for PCB milling. If you already work in Fusion 360 or Vectric, both are used with the Nomad, and Fusion 360 includes a Carbide 3D post processor. The BitZero V2 probe in the box finds your workpiece origin automatically.
You provide: a Windows or Mac computer and, ideally, a shop vacuum. The Nomad 4 ships by freight on a pallet.
| Specification | Carbide 3D Nomad 4 |
|---|---|
| Cutting Area (X x Y x Z) | 10" x 8" x 3.5" |
| Total Z Travel | 3.75" |
| Clearance Under Z-Axis | 4" |
| Spindle | 1.2 kW (1,200 W) VFD |
| Spindle Speed | 8,000 - 24,000 RPM |
| Collet System | ER-16 (1/8", 1/4" and 3/8" collets included) |
| Ballscrews X / Y | 16 mm diameter, 10 mm pitch |
| Ballscrew Z | 16 mm diameter, 5 mm pitch |
| Ballscrew Accuracy | +/- 0.002" per foot |
| Step Length X / Y | 0.00025" |
| Step Length Z | 0.00012" |
| Linear Rails | HG-15, back-mounted, all axes |
| Motors | NEMA 23, 36 V system |
| Homing | Inductive sensors |
| Workholding | Threaded table, 25 x 25 mm hole pattern |
| Materials | All woods; plastics including ABS, acrylic, polycarbonate, Delrin, HDPE, PEEK and PVC; aluminum, brass and copper |
| Footprint (X x Y x Z) | 18" x 18.1" x 20.5" |
| Weight | 120 lb (approx.) |
| Shipping | Freight, 30" x 30" pallet, 160 lb (approx.) |
| Input Power | 110 V, 50/60 Hz, non-GFCI circuit, 12 A max |
| Power Cord | IEC C13 to NEMA 5-15P (standard US plug) |
| Computer Requirements | macOS 13 or higher (Apple Silicon); Windows 10 or 11, 64-bit |
| Warranty | 18 Months |
The Nomad 4 is covered by Carbide 3D's 18-month warranty against defects, and Carbide 3D provides unlimited US-based support by email, phone and video chat from California. Carbide 3D's 60-day "Mistakes Are On Us" guarantee replaces any Carbide 3D-branded part damaged in the first 60 days of ownership, even if the damage was your fault.
| Feature | Nomad 4 | Nomad 3 |
|---|---|---|
| Spindle | 1.2 kW VFD | 130 W brushless |
| Collet | ER-16 (up to 3/8" shanks) | ER-11 |
| Cutting Area | 10" x 8" x 3.5" | 8" x 8" x 3" |
| Drive | 16 mm ballscrews, all axes | Leadscrews with anti-backlash nuts |
| Linear Rails | HG-15 on X, Y and Z | HG-15 on Z only |
| Electronics | External controller and VFD | Built in |
| Footprint | 18" x 18.1" x 20.5" | 17.5" x 19" x 17" |
Choose the Nomad 4 if you machine aluminum, brass or engineering plastics regularly and want production-grade cycle times on a desktop. Choose the Nomad 3 if your work is mostly wood, wax, plastics and PCBs and you want an enclosed mill at a lower price.
Q: What is the difference between the Nomad 4 and the Nomad 3?
A: The Nomad 4 adds a 1.2 kW VFD spindle in place of the Nomad 3's 130 W motor, ballscrews and HG-15 linear rails on every axis, NEMA 23 motors on a 36 V system and an external controller. Its cutting area grows to 10" x 8" x 3.5", about 45% more volume. Carbide 3D continues to sell both, with the Nomad 4 positioned as the high-performance option.
Q: Can the Nomad 4 cut aluminum?
A: Yes. Aluminum, brass and copper are listed materials, and the 1.2 kW spindle with ballscrew drives is built to run adaptive toolpaths in aluminum at productive feeds. As with any mill, some alloys machine more easily than others.
Q: Can the Nomad 4 cut steel?
A: Steel is not a listed material. High-speed spindles are not ideal for steel, so light passes with small tooling are possible but the Nomad 4 is intended for wood, plastics and non-ferrous metals.
Q: What materials can the Nomad 4 machine?
A: It cuts all types of wood, most plastics including ABS, acrylic, polycarbonate, Delrin, HDPE, PEEK and PVC, and non-ferrous metals including aluminum, brass and copper.
Q: Can the Nomad 4 run 3D toolpaths?
A: Yes. It runs 2D and full 3D toolpaths with all axes moving simultaneously, and the included MeshCAM generates 3D toolpaths from STL files.
Q: Does it work with Fusion 360 and Vectric software?
A: Yes. Fusion 360 includes a Carbide 3D post processor for the Nomad, and many owners program it with Vectric software. Carbide Motion reads standard G-code from any CAM program.
Q: What power outlet does the Nomad 4 need?
A: A standard 110 V US outlet (NEMA 5-15) on a non-GFCI circuit that can supply up to 12 A. The machine ships with an IEC C13 to NEMA 5-15P cord.
Q: How much space does it need?
A: The machine measures 18" x 18.1" x 20.5" and fits on a 2 x 2 foot workbench. Allow room nearby for the external controller and VFD unit, which can sit separately from the machine.
Q: How do I manage chips and dust?
A: The enclosure contains chips, and a removable bottom cover lets you sweep debris into a chip bin. A shop vacuum is strongly recommended, and an optional attachment routes a 65 mm Sweepy V2 dust shoe hose out of the machine with no modifications.
Q: Why buy the Nomad 4 from The Maker's Chest?
A: We already sell Carbide 3D's Nomad and Shapeoko machines, so we can help you choose between them based on your parts and materials, coordinate the freight delivery, and handle quotes and purchase orders for businesses, schools and universities. You also get a US-based point of contact for the 18-month Carbide 3D warranty.
| Specification | Carbide 3D Nomad 4 |
|---|---|
| Cutting Area (X x Y x Z) | 10" x 8" x 3.5" |
| Total Z Travel | 3.75" |
| Clearance Under Z-Axis | 4" |
| Spindle | 1.2 kW (1,200 W) VFD |
| Spindle Speed | 8,000 - 24,000 RPM |
| Collet System | ER-16 (1/8", 1/4" and 3/8" collets included) |
| Ballscrews X / Y | 16 mm diameter, 10 mm pitch |
| Ballscrew Z | 16 mm diameter, 5 mm pitch |
| Ballscrew Accuracy | +/- 0.002" per foot |
| Step Length X / Y | 0.00025" |
| Step Length Z | 0.00012" |
| Linear Rails | HG-15, back-mounted, all axes |
| Motors | NEMA 23, 36 V system |
| Homing | Inductive sensors |
| Workholding | Threaded table, 25 x 25 mm hole pattern |
| Materials | All woods; plastics including ABS, acrylic, polycarbonate, Delrin, HDPE, PEEK and PVC; aluminum, brass and copper |
| Footprint (X x Y x Z) | 18" x 18.1" x 20.5" |
| Weight | 120 lb (approx.) |
| Shipping | Freight, 30" x 30" pallet, 160 lb (approx.) |
| Input Power | 110 V, 50/60 Hz, non-GFCI circuit, 12 A max |
| Power Cord | IEC C13 to NEMA 5-15P (standard US plug) |
| Computer Requirements | macOS 13 or higher (Apple Silicon); Windows 10 or 11, 64-bit |
| Warranty | 18 Months |
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
Shipping Insurance ($89)
Desktop CNC mills have always forced a trade-off: a machine small and clean enough for an office, lab or classroom usually stalls the moment you ask it to clear aluminum quickly. The Nomad 4 is Carbide 3D's answer, a ground-up redesign of the enclosed Nomad platform built around a full-size spindle and a motion system stiff enough to use it.
It is not a replacement for the Nomad 3. Carbide 3D describes it as the extreme version of a compact desktop mill, sharing the spindle of the Shapeoko 5 and the 36 V electronics of the HDM, while still fitting comfortably on a 2 x 2 foot bench. Every machine is assembled and tested in Carbide 3D's California shop.
The Nomad 4 replaces the Nomad 3's 130 W motor with a 1.2 kW VFD spindle, nearly ten times the power, running from 8,000 to 24,000 RPM. That headroom is what lets you run adaptive toolpaths in aluminum, brass and copper at productive feeds instead of creeping along to avoid a stall. The ER-16 collet system ships with 1/8", 1/4" and 3/8" collets, so you can step up to larger, stiffer endmills that remove more material per pass and leave a better finish than the small cutters a 130 W spindle limits you to.

Power only helps if the machine doesn't flex under it. Every axis runs on 16 mm ballscrews (10 mm pitch on X and Y, 5 mm on Z) instead of leadscrews, rated to +/- 0.002" per foot, and rides on back-mounted HG-15 linear rails on all three axes, where the Nomad 3 used round rods on X and Y. Back-mounting the rails presents a smooth face to the work area that keeps chips out of the bearings. Upgraded NEMA 23 motors on a 36 V system give the motion system the torque to keep pace with the spindle, and the frame uses billet aluminum components with no extrusions. With step lengths of 0.00025" on X/Y and 0.00012" on Z, the result is less deflection, tighter tolerances and repeatable parts on long runs.

The cutting envelope grows to 10" (X) x 8" (Y) x 3.5" (Z), about 45% more work volume than the Nomad 3's 8" x 8" x 3", with 3.75" of Z travel and 4" of clearance under the spindle. The table comes with a threaded 25 x 25 mm hole pattern built in, so you can bolt down a vise, clamps or your own fixtures on day one without buying a separate workholding plate. Larger windows let you watch the cut, and a redesigned door opens easily even when the machine sits under a shelf.
The controller and VFD live in an external electronics unit you can place away from the machine, which keeps them out of the chips and heat of the cutting area and makes servicing simpler. A Power Pendant on a 2-meter tether stops the machine instantly from anywhere on your bench. Built-in LED lighting illuminates the work, and a removable bottom cover lets you sweep debris straight through into a chip bin. For dust control, an optional attachment routes a 65 mm Sweepy V2 hose out of the enclosure with no modifications.

The Nomad 4 ships with a complete software suite, so there's nothing extra to license before your first cut. Carbide Create handles 2D CAD/CAM, Carbide Motion runs the machine with no license or internet connection, and MeshCAM V8 turns STL files into 3D toolpaths for the Nomad. You also get a redeemable Alibre Workshop license for 3D CAD (Windows only) and Carbide Copper for PCB milling. If you already work in Fusion 360 or Vectric, both are used with the Nomad, and Fusion 360 includes a Carbide 3D post processor. The BitZero V2 probe in the box finds your workpiece origin automatically.
You provide: a Windows or Mac computer and, ideally, a shop vacuum. The Nomad 4 ships by freight on a pallet.
| Specification | Carbide 3D Nomad 4 |
|---|---|
| Cutting Area (X x Y x Z) | 10" x 8" x 3.5" |
| Total Z Travel | 3.75" |
| Clearance Under Z-Axis | 4" |
| Spindle | 1.2 kW (1,200 W) VFD |
| Spindle Speed | 8,000 - 24,000 RPM |
| Collet System | ER-16 (1/8", 1/4" and 3/8" collets included) |
| Ballscrews X / Y | 16 mm diameter, 10 mm pitch |
| Ballscrew Z | 16 mm diameter, 5 mm pitch |
| Ballscrew Accuracy | +/- 0.002" per foot |
| Step Length X / Y | 0.00025" |
| Step Length Z | 0.00012" |
| Linear Rails | HG-15, back-mounted, all axes |
| Motors | NEMA 23, 36 V system |
| Homing | Inductive sensors |
| Workholding | Threaded table, 25 x 25 mm hole pattern |
| Materials | All woods; plastics including ABS, acrylic, polycarbonate, Delrin, HDPE, PEEK and PVC; aluminum, brass and copper |
| Footprint (X x Y x Z) | 18" x 18.1" x 20.5" |
| Weight | 120 lb (approx.) |
| Shipping | Freight, 30" x 30" pallet, 160 lb (approx.) |
| Input Power | 110 V, 50/60 Hz, non-GFCI circuit, 12 A max |
| Power Cord | IEC C13 to NEMA 5-15P (standard US plug) |
| Computer Requirements | macOS 13 or higher (Apple Silicon); Windows 10 or 11, 64-bit |
| Warranty | 18 Months |
The Nomad 4 is covered by Carbide 3D's 18-month warranty against defects, and Carbide 3D provides unlimited US-based support by email, phone and video chat from California. Carbide 3D's 60-day "Mistakes Are On Us" guarantee replaces any Carbide 3D-branded part damaged in the first 60 days of ownership, even if the damage was your fault.
| Feature | Nomad 4 | Nomad 3 |
|---|---|---|
| Spindle | 1.2 kW VFD | 130 W brushless |
| Collet | ER-16 (up to 3/8" shanks) | ER-11 |
| Cutting Area | 10" x 8" x 3.5" | 8" x 8" x 3" |
| Drive | 16 mm ballscrews, all axes | Leadscrews with anti-backlash nuts |
| Linear Rails | HG-15 on X, Y and Z | HG-15 on Z only |
| Electronics | External controller and VFD | Built in |
| Footprint | 18" x 18.1" x 20.5" | 17.5" x 19" x 17" |
Choose the Nomad 4 if you machine aluminum, brass or engineering plastics regularly and want production-grade cycle times on a desktop. Choose the Nomad 3 if your work is mostly wood, wax, plastics and PCBs and you want an enclosed mill at a lower price.
Q: What is the difference between the Nomad 4 and the Nomad 3?
A: The Nomad 4 adds a 1.2 kW VFD spindle in place of the Nomad 3's 130 W motor, ballscrews and HG-15 linear rails on every axis, NEMA 23 motors on a 36 V system and an external controller. Its cutting area grows to 10" x 8" x 3.5", about 45% more volume. Carbide 3D continues to sell both, with the Nomad 4 positioned as the high-performance option.
Q: Can the Nomad 4 cut aluminum?
A: Yes. Aluminum, brass and copper are listed materials, and the 1.2 kW spindle with ballscrew drives is built to run adaptive toolpaths in aluminum at productive feeds. As with any mill, some alloys machine more easily than others.
Q: Can the Nomad 4 cut steel?
A: Steel is not a listed material. High-speed spindles are not ideal for steel, so light passes with small tooling are possible but the Nomad 4 is intended for wood, plastics and non-ferrous metals.
Q: What materials can the Nomad 4 machine?
A: It cuts all types of wood, most plastics including ABS, acrylic, polycarbonate, Delrin, HDPE, PEEK and PVC, and non-ferrous metals including aluminum, brass and copper.
Q: Can the Nomad 4 run 3D toolpaths?
A: Yes. It runs 2D and full 3D toolpaths with all axes moving simultaneously, and the included MeshCAM generates 3D toolpaths from STL files.
Q: Does it work with Fusion 360 and Vectric software?
A: Yes. Fusion 360 includes a Carbide 3D post processor for the Nomad, and many owners program it with Vectric software. Carbide Motion reads standard G-code from any CAM program.
Q: What power outlet does the Nomad 4 need?
A: A standard 110 V US outlet (NEMA 5-15) on a non-GFCI circuit that can supply up to 12 A. The machine ships with an IEC C13 to NEMA 5-15P cord.
Q: How much space does it need?
A: The machine measures 18" x 18.1" x 20.5" and fits on a 2 x 2 foot workbench. Allow room nearby for the external controller and VFD unit, which can sit separately from the machine.
Q: How do I manage chips and dust?
A: The enclosure contains chips, and a removable bottom cover lets you sweep debris into a chip bin. A shop vacuum is strongly recommended, and an optional attachment routes a 65 mm Sweepy V2 dust shoe hose out of the machine with no modifications.
Q: Why buy the Nomad 4 from The Maker's Chest?
A: We already sell Carbide 3D's Nomad and Shapeoko machines, so we can help you choose between them based on your parts and materials, coordinate the freight delivery, and handle quotes and purchase orders for businesses, schools and universities. You also get a US-based point of contact for the 18-month Carbide 3D warranty.
| Specification | Carbide 3D Nomad 4 |
|---|---|
| Cutting Area (X x Y x Z) | 10" x 8" x 3.5" |
| Total Z Travel | 3.75" |
| Clearance Under Z-Axis | 4" |
| Spindle | 1.2 kW (1,200 W) VFD |
| Spindle Speed | 8,000 - 24,000 RPM |
| Collet System | ER-16 (1/8", 1/4" and 3/8" collets included) |
| Ballscrews X / Y | 16 mm diameter, 10 mm pitch |
| Ballscrew Z | 16 mm diameter, 5 mm pitch |
| Ballscrew Accuracy | +/- 0.002" per foot |
| Step Length X / Y | 0.00025" |
| Step Length Z | 0.00012" |
| Linear Rails | HG-15, back-mounted, all axes |
| Motors | NEMA 23, 36 V system |
| Homing | Inductive sensors |
| Workholding | Threaded table, 25 x 25 mm hole pattern |
| Materials | All woods; plastics including ABS, acrylic, polycarbonate, Delrin, HDPE, PEEK and PVC; aluminum, brass and copper |
| Footprint (X x Y x Z) | 18" x 18.1" x 20.5" |
| Weight | 120 lb (approx.) |
| Shipping | Freight, 30" x 30" pallet, 160 lb (approx.) |
| Input Power | 110 V, 50/60 Hz, non-GFCI circuit, 12 A max |
| Power Cord | IEC C13 to NEMA 5-15P (standard US plug) |
| Computer Requirements | macOS 13 or higher (Apple Silicon); Windows 10 or 11, 64-bit |
| Warranty | 18 Months |
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
placeholder