Haotian HT-2000 Water-Cooled 2000W 3-in-1 Laser Welder
By Haotian
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Todd · Branchout Wood, Metal and Laserworks
By Haotian
“The Maker’s Chest took the time to actually call me to check in… I’ve purchased some REALLY high-dollar equipment in the last 30 years. They will have my business forever.”
Discount available for Active-Duty, Veteran, Retired Military Personnel & First Responders.
Unlock Discount
A typical fabrication bay runs a TIG or MIG welder for joining, an angle grinder or plasma cutter for trimming, and a wire wheel or blaster for prep and post-weld cleanup. Each step means another machine, another setup and another round of grinding and rework before a part ships. TIG in particular is slow, skill-intensive and puts enough heat into thin stainless and aluminum to warp it.
The HT-2000 brings those jobs to one water-cooled cabinet and one handheld head. Laser welding concentrates 2,000 W into a tight spot, so it fuses joints quickly with a narrow heat-affected zone and little distortion. Swap the nozzle and the same head cuts sheet or cleans oxide and discoloration from the finished weld.

The SUP-23T system switches between welding, cutting and cleaning by changing the nozzle and selecting the mode on the controller. Welding nozzles shape the shielding-gas flow around the melt pool, cutting nozzles focus the beam and assist gas to sever sheet, and the cleaning accessory kit scans the beam to strip oxide, scale and heat tint. Buying a separate laser cleaner and plasma cutter would cost thousands more and take up two more spots on the floor. Here a welder can prep, join, trim and clean a part without walking to another station.

A laser keyhole weld delivers energy into a spot a fraction of the width of a TIG arc, so the joint fuses at higher travel speed with a narrow heat-affected zone. Less heat spreading through the part means less warping, less discoloration and far less post-weld grinding, especially on thin stainless, aluminum and galvanized sheet. The SUP-23T is a single-oscillation (wobble) head: it sweeps the beam side to side to widen the bead, bridging small fit-up gaps and producing the smooth, uniform seams buyers expect on enclosures, railings, kitchen equipment and brackets. Operators who already weld usually get consistent results quickly, because the head handles much of the torch control a TIG welder has to manage by hand.

Hand-feeding filler into a laser weld is hard to do consistently, and many entry machines ship without a feeder at all. The HT-2000 includes the SUP-AMF-D automatic dual-wire feeder, which pushes filler into the joint at a set rate for uniform bead size and joint fill. Dual-wire feed lays down more filler per pass, which helps on fillet welds and wider gaps where a single wire would leave the joint underfilled. The package includes a 3 m graphite feed tube, U0810 and U1216 feed wheels and two 4.5 kg coils of 1.2 mm 304 stainless wire, so you can start production welding on stainless the day it's installed.

A fiber source's output and beam quality drift as it heats up. The HT-2000 houses an S&A CWFL-1500 water chiller inside the cabinet to circulate coolant through the source and optics and hold them at a stable temperature. Air-cooled welders are lighter but can throttle back after extended use in a hot shop. Water cooling keeps weld penetration and bead appearance consistent from the first joint of the shift to the last. Plan for routine coolant service and freeze protection if the machine sits in an unheated space.
Output adjusts from 10% to 100% of the 2,000 W source. Low settings keep thin stainless and aluminum sheet from burning through, while full power drives deeper penetration on thicker carbon and stainless steel joints. Combined with adjustable oscillation width and wire-feed rate, that range lets one machine handle enclosures, brackets, frames and heavier fabrication. Save the settings that work for each part and every operator welds it the same way, with repeatable quality from job to job.

Many 2,000 W welders need three-phase service, which most small shops don't have. The HT-2000 runs on 220–240 V single phase, with a 45 A machine current rating and 10 kW power consumption including the chiller. At 45 A, an electrician will typically specify a dedicated 60 A circuit; size it to the delivered nameplate and local code. You'll also need argon or nitrogen for weld shielding and clean compressed air for cleaning mode, and an oil-water separator is included for the air line.

Protective windows take spatter and fume on every weld and are the most common reason a laser welder stops mid-shift. Haotian ships the HT-2000 with 55 D18 × T2 protective windows, two F150 and two F800 focusing lenses, a spare collimator and reflective lens, seals and a box of welding and cutting nozzles. That stock covers months of normal production, so a dirty window is a 30-second swap rather than a shipping delay. The handheld head and fiber lead store in a dedicated compartment in the cabinet when not in use.
| Specification | Value |
|---|---|
| Model | HT-2000 |
| Rated output | 2,000 W |
| Laser source | Raycus continuous-wave fiber, CE source version |
| Functions | Welding, cutting and cleaning |
| Wavelength | 1,080 ± 5 nm |
| Power adjustment | 10–100% |
| Controller and head | SUP-23T single-oscillation handheld head |
| Wire feeder | SUP-AMF-D automatic dual-wire feeder |
| Cooling | Water cooled, S&A CWFL-1500 |
| Input | 220–240 V, single phase |
| Power consumption | 10 kW |
| Manufacturer-listed current | 45 A |
| Auxiliary supply | Nitrogen or argon for welding, compressed air for cleaning |
| Handheld head weight | 0.8 kg |
| Machine dimensions | 1,110 × 490 × 850 mm |
| Net weight | 130 kg |
| Shipping weight | 230 kg |
| Warranty | 3 Years |
The Haotian HT-2000 is covered by a 3-year warranty when purchased through The Maker's Chest, well beyond the 1-year term common on imported laser welders, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your joints, materials and shop power before you order so the machine you receive is the right one.
Q: What does 3-in-1 mean on the HT-2000?
A: The SUP-23T head handles welding, cutting and cleaning. You switch functions by changing the nozzle and selecting the mode on the controller; nozzles and a cleaning accessory kit are included.
Q: What metals can the HT-2000 weld?
A: A 2,000 W fiber laser welder joins stainless steel, carbon steel, galvanized steel and aluminum, along with brass, copper and titanium with appropriate settings and shielding gas. It performs best on thin and medium-gauge sheet and fabricated sections.
Q: How does laser welding compare with TIG welding?
A: Laser welding is faster, produces a narrower heat-affected zone and causes much less distortion and discoloration, so parts need far less grinding afterward. It's also easier to learn. TIG is still more versatile for very thick sections and out-of-position repair work.
Q: Do I need welding experience to use it?
A: Welding experience helps with joint prep and fit-up, but the oscillating head and automatic wire feed handle much of the torch control TIG requires. Most operators produce consistent seams after a short period of practice on scrap.
Q: Does it come with a wire feeder?
A: Yes. The SUP-AMF-D automatic dual-wire feeder, feed tube, feed wheels and two 4.5 kg coils of 1.2 mm 304 stainless wire are all included.
Q: What electrical service does it need?
A: 220–240 V single phase with a 45 A machine current rating. Most electricians will specify a dedicated 60 A circuit; size it to the delivered nameplate and local code. No three-phase service is required.
Q: What gas and air supply do I need?
A: Argon or nitrogen for weld shielding, and clean compressed air for cleaning mode. An oil-water separator is included for the air line.
Q: Is the HT-2000 water cooled?
A: Yes. An S&A CWFL-1500 chiller is built into the cabinet. Use the recommended coolant and protect it from freezing if the shop isn't heated.
Q: Is handheld laser welding safe in a regular shop?
A: It's a Class 4 laser, so it needs a controlled area with laser curtains or barriers, 1,070–1,080 nm-rated eyewear for everyone nearby (two OD8+ pairs are included) and fume extraction. With those in place it's routinely used in production shops.
Q: What does the price include?
A: The US$7,900 price follows Haotian's delivered quote for the configuration shown, including the wire feeder, chiller and the full accessory package listed above.
Q: Can I return a Haotian machine?
A: No. Haotian machines are built to order, and The Maker's Chest does not accept returns on them. That's why we review your joints, materials and installation with you before you order.
Q: Why buy the HT-2000 from The Maker's Chest?
A: You get a 3-year warranty, USA-based technical support and a pre-purchase joint and installation review. We also supply universities, schools and businesses and can handle purchase orders.
| Specification | Value |
|---|---|
| Model | HT-2000 |
| Rated output | 2,000 W |
| Laser source | Raycus continuous-wave fiber, CE source version |
| Functions | Welding, cutting and cleaning |
| Wavelength | 1,080 ± 5 nm |
| Power adjustment | 10–100% |
| Controller and head | SUP-23T single-oscillation handheld head |
| Wire feeder | SUP-AMF-D automatic dual-wire feeder |
| Cooling | Water cooled, S&A CWFL-1500 |
| Input | 220–240 V, single phase |
| Power consumption | 10 kW |
| Manufacturer-listed current | 45 A |
| Auxiliary supply | Nitrogen or argon for welding, compressed air for cleaning |
| Handheld head weight | 0.8 kg |
| Machine dimensions | 1,110 × 490 × 850 mm |
| Net weight | 130 kg |
| Shipping weight | 230 kg |
| Warranty | 3 Years |
The Haotian HT-2000 is covered by a 3-year warranty when purchased through The Maker's Chest, well beyond the 1-year term common on imported laser welders, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your joints, materials and shop power before you order so the machine you receive is the right one.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
Shipping Insurance ($89)
A typical fabrication bay runs a TIG or MIG welder for joining, an angle grinder or plasma cutter for trimming, and a wire wheel or blaster for prep and post-weld cleanup. Each step means another machine, another setup and another round of grinding and rework before a part ships. TIG in particular is slow, skill-intensive and puts enough heat into thin stainless and aluminum to warp it.
The HT-2000 brings those jobs to one water-cooled cabinet and one handheld head. Laser welding concentrates 2,000 W into a tight spot, so it fuses joints quickly with a narrow heat-affected zone and little distortion. Swap the nozzle and the same head cuts sheet or cleans oxide and discoloration from the finished weld.

The SUP-23T system switches between welding, cutting and cleaning by changing the nozzle and selecting the mode on the controller. Welding nozzles shape the shielding-gas flow around the melt pool, cutting nozzles focus the beam and assist gas to sever sheet, and the cleaning accessory kit scans the beam to strip oxide, scale and heat tint. Buying a separate laser cleaner and plasma cutter would cost thousands more and take up two more spots on the floor. Here a welder can prep, join, trim and clean a part without walking to another station.

A laser keyhole weld delivers energy into a spot a fraction of the width of a TIG arc, so the joint fuses at higher travel speed with a narrow heat-affected zone. Less heat spreading through the part means less warping, less discoloration and far less post-weld grinding, especially on thin stainless, aluminum and galvanized sheet. The SUP-23T is a single-oscillation (wobble) head: it sweeps the beam side to side to widen the bead, bridging small fit-up gaps and producing the smooth, uniform seams buyers expect on enclosures, railings, kitchen equipment and brackets. Operators who already weld usually get consistent results quickly, because the head handles much of the torch control a TIG welder has to manage by hand.

Hand-feeding filler into a laser weld is hard to do consistently, and many entry machines ship without a feeder at all. The HT-2000 includes the SUP-AMF-D automatic dual-wire feeder, which pushes filler into the joint at a set rate for uniform bead size and joint fill. Dual-wire feed lays down more filler per pass, which helps on fillet welds and wider gaps where a single wire would leave the joint underfilled. The package includes a 3 m graphite feed tube, U0810 and U1216 feed wheels and two 4.5 kg coils of 1.2 mm 304 stainless wire, so you can start production welding on stainless the day it's installed.

A fiber source's output and beam quality drift as it heats up. The HT-2000 houses an S&A CWFL-1500 water chiller inside the cabinet to circulate coolant through the source and optics and hold them at a stable temperature. Air-cooled welders are lighter but can throttle back after extended use in a hot shop. Water cooling keeps weld penetration and bead appearance consistent from the first joint of the shift to the last. Plan for routine coolant service and freeze protection if the machine sits in an unheated space.
Output adjusts from 10% to 100% of the 2,000 W source. Low settings keep thin stainless and aluminum sheet from burning through, while full power drives deeper penetration on thicker carbon and stainless steel joints. Combined with adjustable oscillation width and wire-feed rate, that range lets one machine handle enclosures, brackets, frames and heavier fabrication. Save the settings that work for each part and every operator welds it the same way, with repeatable quality from job to job.

Many 2,000 W welders need three-phase service, which most small shops don't have. The HT-2000 runs on 220–240 V single phase, with a 45 A machine current rating and 10 kW power consumption including the chiller. At 45 A, an electrician will typically specify a dedicated 60 A circuit; size it to the delivered nameplate and local code. You'll also need argon or nitrogen for weld shielding and clean compressed air for cleaning mode, and an oil-water separator is included for the air line.

Protective windows take spatter and fume on every weld and are the most common reason a laser welder stops mid-shift. Haotian ships the HT-2000 with 55 D18 × T2 protective windows, two F150 and two F800 focusing lenses, a spare collimator and reflective lens, seals and a box of welding and cutting nozzles. That stock covers months of normal production, so a dirty window is a 30-second swap rather than a shipping delay. The handheld head and fiber lead store in a dedicated compartment in the cabinet when not in use.
| Specification | Value |
|---|---|
| Model | HT-2000 |
| Rated output | 2,000 W |
| Laser source | Raycus continuous-wave fiber, CE source version |
| Functions | Welding, cutting and cleaning |
| Wavelength | 1,080 ± 5 nm |
| Power adjustment | 10–100% |
| Controller and head | SUP-23T single-oscillation handheld head |
| Wire feeder | SUP-AMF-D automatic dual-wire feeder |
| Cooling | Water cooled, S&A CWFL-1500 |
| Input | 220–240 V, single phase |
| Power consumption | 10 kW |
| Manufacturer-listed current | 45 A |
| Auxiliary supply | Nitrogen or argon for welding, compressed air for cleaning |
| Handheld head weight | 0.8 kg |
| Machine dimensions | 1,110 × 490 × 850 mm |
| Net weight | 130 kg |
| Shipping weight | 230 kg |
| Warranty | 3 Years |
The Haotian HT-2000 is covered by a 3-year warranty when purchased through The Maker's Chest, well beyond the 1-year term common on imported laser welders, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your joints, materials and shop power before you order so the machine you receive is the right one.
Q: What does 3-in-1 mean on the HT-2000?
A: The SUP-23T head handles welding, cutting and cleaning. You switch functions by changing the nozzle and selecting the mode on the controller; nozzles and a cleaning accessory kit are included.
Q: What metals can the HT-2000 weld?
A: A 2,000 W fiber laser welder joins stainless steel, carbon steel, galvanized steel and aluminum, along with brass, copper and titanium with appropriate settings and shielding gas. It performs best on thin and medium-gauge sheet and fabricated sections.
Q: How does laser welding compare with TIG welding?
A: Laser welding is faster, produces a narrower heat-affected zone and causes much less distortion and discoloration, so parts need far less grinding afterward. It's also easier to learn. TIG is still more versatile for very thick sections and out-of-position repair work.
Q: Do I need welding experience to use it?
A: Welding experience helps with joint prep and fit-up, but the oscillating head and automatic wire feed handle much of the torch control TIG requires. Most operators produce consistent seams after a short period of practice on scrap.
Q: Does it come with a wire feeder?
A: Yes. The SUP-AMF-D automatic dual-wire feeder, feed tube, feed wheels and two 4.5 kg coils of 1.2 mm 304 stainless wire are all included.
Q: What electrical service does it need?
A: 220–240 V single phase with a 45 A machine current rating. Most electricians will specify a dedicated 60 A circuit; size it to the delivered nameplate and local code. No three-phase service is required.
Q: What gas and air supply do I need?
A: Argon or nitrogen for weld shielding, and clean compressed air for cleaning mode. An oil-water separator is included for the air line.
Q: Is the HT-2000 water cooled?
A: Yes. An S&A CWFL-1500 chiller is built into the cabinet. Use the recommended coolant and protect it from freezing if the shop isn't heated.
Q: Is handheld laser welding safe in a regular shop?
A: It's a Class 4 laser, so it needs a controlled area with laser curtains or barriers, 1,070–1,080 nm-rated eyewear for everyone nearby (two OD8+ pairs are included) and fume extraction. With those in place it's routinely used in production shops.
Q: What does the price include?
A: The US$7,900 price follows Haotian's delivered quote for the configuration shown, including the wire feeder, chiller and the full accessory package listed above.
Q: Can I return a Haotian machine?
A: No. Haotian machines are built to order, and The Maker's Chest does not accept returns on them. That's why we review your joints, materials and installation with you before you order.
Q: Why buy the HT-2000 from The Maker's Chest?
A: You get a 3-year warranty, USA-based technical support and a pre-purchase joint and installation review. We also supply universities, schools and businesses and can handle purchase orders.
| Specification | Value |
|---|---|
| Model | HT-2000 |
| Rated output | 2,000 W |
| Laser source | Raycus continuous-wave fiber, CE source version |
| Functions | Welding, cutting and cleaning |
| Wavelength | 1,080 ± 5 nm |
| Power adjustment | 10–100% |
| Controller and head | SUP-23T single-oscillation handheld head |
| Wire feeder | SUP-AMF-D automatic dual-wire feeder |
| Cooling | Water cooled, S&A CWFL-1500 |
| Input | 220–240 V, single phase |
| Power consumption | 10 kW |
| Manufacturer-listed current | 45 A |
| Auxiliary supply | Nitrogen or argon for welding, compressed air for cleaning |
| Handheld head weight | 0.8 kg |
| Machine dimensions | 1,110 × 490 × 850 mm |
| Net weight | 130 kg |
| Shipping weight | 230 kg |
| Warranty | 3 Years |
The Haotian HT-2000 is covered by a 3-year warranty when purchased through The Maker's Chest, well beyond the 1-year term common on imported laser welders, and is backed by USA-based technical support.
Haotian machines are built to order, so The Maker's Chest does not accept returns on Haotian equipment. We review your joints, materials and shop power before you order so the machine you receive is the right one.
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
Summary
Order Confirmation & Dispatch
As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes
Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
placeholder