Nov 9 - 30: Free Lightburn Pro with every laser > $2,000* | 75-day Extended Returns
Nov 9-30: Free Lightburn Pro with every laser > $2,000*
Skip to content
3000W vs 6000W Continuous Laser Cleaner

3000W vs 6000W Continuous Laser Cleaner: Speed, Power Requirements and Which to Buy

Short answer: the 3000W is the right machine for fabrication shops, equipment refurbishment, trailers and structural steel cleaned in a shop or yard. The 6000W is for ship hulls, storage tanks, bridges and steel structures measured in hundreds or thousands of square meters, where roughly doubling the cleaning rate justifies a bigger machine, a heavier cleaning head and a 60A three-phase supply. Both Hanten machines need 380V power, which most North American buildings do not have, so plan the electrical side before you choose.

This guide compares the two high-power continuous-wave cleaners we carry from Hanten: the Hanten SEAL2 3000W ($5,900) and the Hanten 6000W continuous laser rust removal machine ($12,950). Prices are our listed prices at publish time and are subject to change; budget separately for a transformer if your building doesn't have 380V. If you are still deciding between continuous wave and pulsed, read pulsed or continuous-wave: which to buy first. For the entry CW tier, see 1500W vs 2000W; for every size side by side, see what wattage laser cleaner do I need and our laser cleaning machine price guide.

Table of Contents

3000W vs 6000W Side by Side

Spec Hanten SEAL2 3000W Hanten 6000W
TMC price* $5,900 $12,950
Laser type Continuous-wave fiber, 1070 nm Continuous-wave fiber (MAX or BWT source), 1070 nm
Power supply 380V 380V three-phase, 60A max; 24 kW max consumption
Max cleaning width 300 mm Up to 500 mm
Cleaning head 0.9 kg, safety lock and dual trigger 2.2 kg dual-handle, water-cooled, five-level safety
Controls Retractable touchscreen, 8 languages 10-inch HD touchscreen, 9 presets, mobile app, 30+ languages
Cooling Integrated water cooling Full-body water cooling through the head
Fiber cable 10 m 10 m, QBH 50 µm core
Machine size 1180 × 570 × 1080 mm 1420 × 740 × 1220 mm
Machine weight About 175 kg 241 kg
Warranty 1 yr machine, 2 yr laser source 1 yr machine, 2 yr laser source

*Listed price at publish time, subject to change. Transformer and installation not included.

Cleaning Speed by Rust Thickness

Hanten publishes laboratory rust-removal rates for its whole continuous-wave line. The 6000W roughly doubles the 3000W at every rust thickness:

Hanten CW power Rust up to 50 µm Rust 50–100 µm Rust over 100 µm
1500W 25–30 m²/h 15 m²/h 8 m²/h
2000W 35–40 m²/h 20 m²/h 10 m²/h
3000W 50–60 m²/h 30 m²/h 20 m²/h
6000W 100–120 m²/h 70 m²/h 40 m²/h

Hanten also rates the 6000W at about 80 m²/h on 200 µm oxide layers and 200 µm paint, and shows the SEAL2 3000W stripping paint up to 1 mm thick. These are laboratory figures on flat steel; edges, welds, complex shapes and operator technique will all bring real-world numbers down.

Notice that the jump from 2000W to 3000W is about 50%, while the jump from 3000W to 6000W is about 100%. For buyers already running a 1500W or 2000W machine, the 3000W is a meaningful step; the 6000W is a different class of tool.

What the Speed Difference Means on a Real Job

Using Hanten's rates, here is the laser-on time for 1,000 m² of rusted steel, roughly the area of a mid-size hull section or several storage-tank shells:

Rust layer 3000W 6000W
Up to 50 µm 17–20 hours 8–10 hours
50–100 µm about 33 hours about 14 hours
Over 100 µm about 50 hours about 25 hours

On a job that size, the 6000W saves one to three working weeks of operator time, which is why it makes sense in shipyards and tank maintenance. On a 50 m² trailer or equipment frame, the difference is an hour or two, and the 3000W's lighter gun and smaller footprint win. In price terms, the 6000W costs $7,050 more than the 3000W, so it pays off when those saved operator hours recur job after job.

The scale question comes up on forums too. One coatings contractor on r/LaserCleaningPorn asked about stripping 14,000 m² of paint from structural steel on a site where sandblasting was not allowed because of dust, exactly the kind of project where a 6000W-class machine, or several of them, earns its keep.

Continuous-wave laser removing rust and coatings from a ship hull

Scan Width, Lenses and Working Distance

The SEAL2 3000W sweeps up to 300 mm at an 800 mm working distance. That long standoff keeps the operator well back from debris, which is both more comfortable and safer on big jobs.

The 6000W offers four field lenses: F500 (10–165 mm), F900 (10–300 mm), F1200 (10–360 mm) and F1400 (10–500 mm), with scan speeds up to 40,000 mm/s. The widest lens covers half a meter per pass on flat plate and hull sections, while the narrow lenses concentrate energy on welds, edges and heavy scale.

Cleaning Head Weight and Operator Fatigue

This is the most underrated difference. The 3000W's gun weighs 0.9 kg; the 6000W's water-cooled, dual-handle head weighs 2.2 kg. Over a full shift, especially overhead or on vertical surfaces, that matters. The dual handles spread the load across both hands, and the head carries five layers of safety protection, including a double-click power-on, a safety sensor switch and optical monitoring of collimation, focus and back-reflection.

For the 3000W, Hanten offers an optional 2 kg wheeled support bracket that carries the gun along floors and flat surfaces and adds a dust-extraction port, so operators are not bent over holding it all day.

Dual-handle water-cooled cleaning head of the Hanten 6000W

Power Planning: 380V, Transformers and Generators

This is the section to read before you order either machine. Based on the calls our team fields every week, electrical service is the single most common reason a high-power CW purchase gets delayed.

Why 380V is a problem in North America

Both machines are built for 380V, the standard industrial voltage in China and much of the world. North American commercial buildings typically have 208V or 240V three-phase, or 480V three-phase in larger industrial facilities. None of those is 380V, so in most cases you will need a transformer: a step-up unit from 208V/240V, or a step-down unit from 480V. Hanten notes that many of its steel-fabrication and heavy rust-removal customers run the 6000W exactly this way.

If you don't have three-phase at all

Not every 3,000W cleaner needs 380V. The SFX SLC-3040 ($12,499) is offered on 220V single-phase as well as 380V three-phase, with an integrated chiller and a cleaning width of up to 400 mm. The MCWlaser B3000 ($14,545) adds a 20 m fiber option for large assemblies. Both cost more than the SEAL2 3000W, but on a single-phase site the difference can be smaller than the cost of a transformer and new service.

Sizing the supply

Hanten specifies the 6000W at 60A maximum current and 24 kW maximum power consumption on three-phase 380V. A licensed electrician should size the transformer, breaker and wiring from the machine's nameplate data with appropriate headroom; this is not a place to guess. Send us your building's service details and we will pass the full electrical specification to your electrician before the machine ships.

Running from a generator

Field crews often ask about generators for hull, bridge and tank work. Plan for a generator well above the machine's rated draw, because laser sources, chillers and pumps all start up together. One buyer on r/LaserCleaningPorn reported that a supplier quoted roughly 18 kVA of draw for a 3000W CW cleaner and recommended a generator of at least 30 kVA, which surprised them. Expect the 6000W to need substantially more. Confirm generator sizing with the electrician and with us before committing to a rental.

Compressed Air, Fume Extraction and Cooling

  • Compressed air: Hanten recommends an air compressor with an oil-water separator for high-power and continuous work. Dry, oil-free air across the protective lens means fewer lens replacements and less downtime.
  • Fume extraction: at 3,000–6,000W the volume of vaporized rust and coating is large. Indoors, a high-capacity filtered extractor is essential; see the fume extractors we carry. Old coatings may contain lead or other hazardous compounds, so test before stripping and follow local rules.
  • Cooling and environment: both machines are water-cooled and specified for 10–40°C. Protect the coolant from freezing in unheated spaces, and give the cabinet room to breathe. Operators on r/LaserCleaningPorn have traced summer overheating alarms on CW cleaners to poor ventilation around the cabinet rather than a machine fault.
  • Laser safety: these are Class 4 lasers. Use eyewear rated for the 1070 nm wavelength, control access to the work area, and watch for reflections off bright metal.

What Neither Machine Is For

High-power continuous wave puts substantial heat into the surface. That is what makes it fast on thick steel, and why Hanten states the 6000W is not intended for molds, precision parts or thin metal. The same applies to the 3000W on thin sheet, car body panels, aluminum parts, wood and finish-critical components. For that work, use a pulsed cleaner; see 300W vs 500W pulsed laser cleaner, our laser paint removal guide and laser cleaning wood. For an overview of how the process works and where it falls short, see laser rust removal explained.

Verdict: Choose 3000W If / Choose 6000W If

Choose the SEAL2 3000W ($5,900) if you clean heavy rust, scale and coatings on parts, frames, trailers, equipment and structural steel in a shop or yard; you want a 0.9 kg gun operators can hold all day; and your jobs are measured in tens or low hundreds of square meters. It is also the natural upgrade from a 1500W or 2000W machine.

Choose the 6000W ($12,950) if you strip ship hulls, storage tanks, pipelines, bridges or large steel structures; your jobs run to hundreds or thousands of square meters; you have (or will install) a 60A three-phase 380V supply; and halving the operator hours is worth a bigger, heavier system.

Choose a 220V-capable 3000W such as the SFX SLC-3040 if you want 3,000W speed but your building only has single-phase service.

Based on our experience selling laser equipment to universities, schools, and businesses of all sizes, the buyers who get the most from high-power CW are the ones who sorted out power, air and extraction before the crate arrived, not after.

Frequently Asked Questions

How much faster is a 6000W laser cleaner than a 3000W?

About twice as fast, by Hanten's laboratory data: 100–120 m²/h versus 50–60 m²/h on rust up to 50 µm, 70 versus 30 m²/h on 50–100 µm rust, and 40 versus 20 m²/h on rust thicker than 100 µm.

How much does a 3000W or 6000W laser cleaner cost?

At The Maker's Chest, the Hanten SEAL2 3000W is listed at $5,900 and the Hanten 6000W at $12,950 at publish time. Other 3,000W options run $12,499 (SFX SLC-3040) to $14,545 (MCWlaser B3000). Budget extra for a transformer if your building doesn't have 380V.

Can I run a 3000W laser cleaner on 220V or 240V?

Not the Hanten SEAL2 3000W, which is specified for 380V and needs a transformer on a 220V or 240V supply. The SFX SLC-3040 is offered in a 220V single-phase version. The lower-power 1500W and 2000W SEAL2 models also run on 220V.

What size transformer do I need for a 6000W laser cleaner?

Hanten specifies 380V three-phase, 60A maximum and 24 kW maximum consumption. Have a licensed electrician size the transformer and circuit from that data with headroom; we can provide the full specification sheet.

What size generator does a 3000W CW laser cleaner need?

Size it well above the rated draw. One buyer reported a supplier quoting about 18 kVA of draw for a 3000W CW machine and recommending at least a 30 kVA generator. Confirm with your electrician before renting.

Is a 6000W laser cleaner overkill for a fabrication shop?

Usually, yes. For parts, frames and structural members cleaned in a shop, the 3000W delivers strong throughput with a lighter gun and simpler power requirements. The 6000W pays off on very large surfaces.

Can a 3000W or 6000W laser cleaner remove paint?

Yes, on steel. Hanten shows the 3000W stripping 1 mm thick paint and rates the 6000W at about 80 m²/h on 200 µm paint. Neither is suitable for paint on thin metal, aluminum or wood.

Do these machines need a separate chiller?

No. Water cooling is built into both cabinets. Keep them within 10–40°C and protect the coolant from freezing.

Is a 6000W laser cleaner safe to use handheld?

It is designed for handheld use with a dual-handle head and five layers of safety interlocks, but it is a Class 4 laser. Operators need 1070 nm-rated eyewear, a controlled work area and proper training.

Planning a large-area cleaning job or a 380V installation? Send us your power service details, surface area and coating type through our contact page, and The Maker's Chest team will help you choose between 3000W and 6000W and plan the setup before it ships.

Written By

Alina Oprea profile picture

Alina Oprea

Maker & Equipment Specialist

Alina Oprea is a hands-on maker, jeweler, and workshop specialist at The Maker’s Chest, with 25 years of silversmithing experience alongside a background in woodworking, renovations, construction, and commercial ductwork installation.

Her experience spans decorative woodwork, hand-carved doors, jewelry fabrication, homebuilding with Habitat, and real jobsite problem-solving — giving her a practical understanding of materials, tools, workflow, and what machines need to deliver beyond the spec sheet.

Previous article Laser Cleaning Wood: What It Strips, What It Can't, and Why Only Pulsed Lasers Work
Next article What Wattage Laser Cleaner Do I Need? (Plus Cooling and Voltage: 110V, 220V or 380V)
Skip the AI. Call an Expert. Skip the AI. Call an Expert.