Buy with total confidence with our industry leading returns policy.
Buy Now, Pay Later – flexible financing.
Enjoy flexible maker financing options with Shop Pay, Klarna or AmericanBank Equipment Finance.
$2,000+ in bonuses with all machines.
Take advantage of exclusive Partnership Benefits, a “Mastering Etsy” video course, access to our LaserGuide AI Chatbot, 10,000+ laser cut design files and 2,500+ premium fonts.
Local USA-based support from makers.
Get dual support from our USA-based team and also directly from our suppliers.
[Heads up — Shapeoko CNC machines are not included in our free shipping offer and carry a flat $150 shipping fee, which will appear at checkout. This reflects Carbide 3D's distributor shipping policy, which we're required to honor as an official distributor. Also, Shapeoko 5.1 Pro leg kits have a lead time of 17 days. If ordering the legs, they will all ship as one package once the legs are available.]
The CNC Router Built to Run All Day, Every Day — and Everything You Need to Get Started.
The Shapeoko 5.1 Pro is a complete, production-capable CNC router system built on industrial-grade HG-15 linear rails and 16mm ballscrews — the same motion system used on CNC machines that cost ten times as much. Available in three sizes (2×2, 4×2, and 4×4), it ships with Carbide Create software, BitSetter, Hybrid T-slot Table, dust boot, clamps, and training — every component you need, from one company that actually supports all of it.
Why "Complete CNC Router" Matters More Than You Think
Most CNC routers are sold as a machine — but the machine is only part of what you need to actually cut parts. Workholding, dust collection, tool measurement, software, and training aren't included. You piece them together from different vendors, at extra cost, and when something goes wrong, nobody takes responsibility because there's no single company that owns the whole system.
The Shapeoko 5.1 Pro was built around a different philosophy. It's not just a CNC Router — it's a complete system of hardware, software, accessories, and training, built and supported in the USA, that will get you up and running as fast as possible.
Everything from the Hybrid Table to the BitSetter to Carbide Create to the dust boot is designed together, tested together, and supported together. If you have a problem — with the machine, the software, or even a specific project — you contact one team. No finger-pointing.
The Motion System: Industrial Components in a Workshop Machine
The Shapeoko 5.1 Pro is built from a rigid base, custom extrusions, linear rails, and ballscrews. No round rails, nothing unsupported, no belts, leadscrews, or gear racks. Every component in the motion system was chosen to eliminate the compromises that limit less serious machines.
HG-15 Linear Rails on Every Axis: These are industrial-grade rails built for machines far larger and heavier than the Shapeoko 5.1 Pro. Sealed and plugged to keep dust away from the bearings themselves. They provide the rigidity and precision that makes the difference between clean cuts and chatter marks, especially at higher feed rates in aluminum.
16mm Ballscrews on X and Y (20mm pitch): Ballscrews convert rotary motion to linear motion with minimal backlash and high positional accuracy. The custom dust wipers remove chips and debris from the screw before they can enter the drive mechanism — a maintenance detail that extends the machine's accuracy over years of use.
HDZ Z-Axis (from the Shapeoko HDM): The entire Z-axis was taken from the Shapeoko HDM and modified for the Shapeoko 5.1 Pro. It's the beefiest Z-axis they've ever made — a 16mm ballscrew with 10mm pitch that lifts a heavy 80mm spindle confidently. 6.1" of total Z travel, with 4" clearance from the table to the gantry with the Hybrid Table installed.
Precision-Machined Extrusions: All motion hardware mounts to extrusions that are machined in-house on industrial machining centers — not T-slots. No flex. No mounting surface error. The rails run true from end to end.
Three Sizes. One Machine Platform.
The Shapeoko 5.1 Pro is available in three cutting area configurations — the machine platform, electronics, and components are identical across all three. Choose the size that fits your workshop, your project scale, and your budget.
2×2 (24.53" × 24.53" travel): A perfect machine for smaller shops and big enough for real projects. The 2×2 handles sign blanks, cutting boards, custom furniture components, instrument parts, and aluminum plate work without the full footprint of the larger versions. Machine footprint is 35.5" × 35" — fits on most workbenches without dominating the shop. If space is your primary constraint, the 2×2 doesn't compromise on motion system quality — same HG-15 rails, same ballscrews, same electronics.
4×2 (48.7" × 24.53" travel): The most popular configuration for shops that need length but have limited depth. Full 4-foot length for doors, long panels, wide signs, and nested batches of smaller parts. Footprint is 60" × 35" — the same front-to-back depth as the 2×2, just wider.
4×4 (48.7" × 48.7" travel): The massive 48.7" × 48.7" work envelope provides capacity for full panels, furniture components, signage, and large-scale prototyping. Fits standard 4×8 sheet goods without cutting them down — you index the sheet through the open front-to-back design. Footprint is 60" × 59".
Software That's Actually Included and Actually Supported
The Shapeoko 5.1 Pro includes two software packages — both free, both maintained by Carbide 3D:
Carbide Create — 2D/3D CAD/CAM software for designing and generating toolpaths. Handles profiles, pockets, V-carving, inlays, 3D relief work, and more. Runs on Windows and macOS. Free forever with continuous updates. If you already have a preferred CAM package (Fusion 360, VCarve, Aspire), the 5.1 Pro accepts standard G-code from any source.
Carbide Motion — the machine controller software. Manages homing, jogging, job execution, tool changes, and BitSetter interaction. Actively maintained, optimized for Shapeoko, and free for all owners indefinitely.
Because Carbide 3D writes and supports both the machine and the software, you're never redirected to another company when a software question intersects with a machine question. One support team handles everything.
BitSetter — included with every machine. Automatically measures tool length after every tool change, enabling multi-tool jobs with automatic Z-compensation. No manual re-zeroing between tools.
Power Pendant — a 2-meter tethered remote control for emergency stop and feedhold. Mount it wherever you stand during jobs — no need to reach back to the machine to pause a cut.
The Hybrid Table: Workholding That Actually Works
Workholding — how you secure material to the machine — is one of the most challenging and most underappreciated aspects of CNC work. A machine with mediocre workholding wastes its own accuracy, because the part moves during the cut.
The Shapeoko 5.1 Pro's Hybrid Table combines T-slot tracks for clamps, fixtures, and vises with a solid base that provides a rigid, non-deflecting foundation for the machine itself. Six included Shapeoko Essentials Clamps and 12 Teez-Nutz T-nuts get you started with basic workholding immediately.
The front face of the machine includes M6×1 threaded holes for vertical workholding — tip a board up and use the gantry shift (3.15" forward clearance) for joinery operations like tenons and mortises that require end-grain access. This is a capability most desktop CNC routers simply don't have.
60-Day Mistakes Are On Us Guarantee
Learning CNC involves making mistakes. An expensive mistake during the learning period shouldn't end your CNC journey.
For the first 60 days of ownership, Carbide 3D will replace or repair any Carbide 3D-branded item that gets damaged — even if it's your fault. This is in addition to the standard one-year warranty on all parts and electronics. It's a policy that no other CNC router manufacturer offers at this level, and it's one of the most meaningful differentiators in the category.
This guarantee is Carbide 3D's direct policy and applies regardless of where you purchase the machine.
The Maker's Chest Difference
The Shapeoko 5.1 Pro is available from Carbide 3D directly and from official resellers. Here's what changes when you order through The Maker's Chest:
🛡️ 75-day returns — significantly longer than Carbide 3D's direct return policy. Enough time to assemble the machine, run your first cuts on your actual materials, evaluate whether it fits your workflow, and make an informed decision
🇺🇸 Expert USA-based technical support — our team can help with assembly questions, first-cut setup, Carbide Create and CAM workflow, and production issues that arise after you're up and running
📞 Dual lines of support — phone and email, so when you're mid-job and something needs attention, you have a direct path to a real person in addition to Carbide 3D's own support
🔧 Straight size guidance — 2×2, 4×2, or 4×4? Not sure which cutting area fits your actual projects and workspace? Talk to us before you order. We'll help you choose correctly the first time
Note on shipping: The Shapeoko 5.1 Pro ships in multiple boxes. A flat shipping fee applies and will appear at checkout — this reflects Carbide 3D's distributor shipping policy, which we honor as an official reseller.
Frequently Asked Questions About the Shapeoko 5 Pro 2×2
Q: Which size should I choose — 2×2, 4×2, or 4×4?
A: Think about the largest single piece you'll regularly cut and what fits in your shop. The 2×2 (24.5" × 24.5" travel) handles most small-to-medium projects — cutting boards, signs, parts, panels up to about 2 feet. Footprint is workbench-sized. The 4×2 (48.7" × 24.5" travel) adds 4-foot length for doors, long panels, and larger signage without adding shop depth. The 4×4 (48.7" × 48.7" travel) processes full 4-foot wide material and is the choice for furniture, large signage, and batch production. The motion system and components are identical across all three — you're choosing workspace, not machine quality.
Q: The listing says I need to add my own router. Which one should I get?
A: The Carbide Compact Router is the simplest choice — designed specifically for CNC use, includes precision collets and replacement brushes, runs on 110V. It's reliable, quiet enough for a workshop, and pairs perfectly with Carbide Create's RPM recommendations. The Carbide VFD Spindle is the step up for longer production runs — water-cooled, quieter, and RPM is set automatically by your G-code rather than manually. Add either one at checkout. If you already own a Makita RT0701C or similar 65mm router, that's compatible too.
Q: What materials can it cut?
A: Any species of wood, plywood, and MDF. All common plastics including acrylic, ABS, HDPE, Delrin, PEEK, and polypropylene. Non-ferrous metals including aluminum and brass. Wax, foam, and polyurethane tooling board. For stone and ceramic, the MC Etcher drag engraver accessory enables surface engraving. The 5.1 Pro cannot cut ferrous metals (steel, cast iron) — that requires a dedicated metal-cutting CNC machine.
Q: How is the Shapeoko 5.1 Pro different from the Shapeoko HDM?
A: The Shapeoko HDM is a more powerful machine and ideal if you want to primarily cut aluminum and brass. The Shapeoko 5.1 Pro is pretty close to being as good when paired with Carbide 3D's VFD spindle, at a lower price point with larger cutting size options available. The HDM's key differentiators are the integrated water-cooled spindle (included, not purchased separately), heavier extrusions optimized for sustained metal cutting, and an all-aluminum Hybrid Table. If aluminum and brass are your primary daily materials and you want a machine purpose-built for metal, the HDM is worth the step up. If your primary work is wood and plastics with occasional aluminum, the 5.1 Pro delivers excellent value.
Q: Do I need a shop vacuum?
A: Not required, but strongly recommended. The included Sweepy V2 dust boot connects to any standard shop vacuum and contains chips and dust at the cutting zone. Running without dust collection is possible but creates buildup in the machine's motion components and your workspace. If you have a shop vacuum, you'll want to use it.
Q: What is the 60-Day Mistakes Are On Us Guarantee?
A: For the first 60 days of ownership, Carbide 3D will replace or repair any Carbide 3D-branded component that's damaged — even through operator error. A broken bit, a crashed Z-axis, a broken clamp — covered. It's designed to let new CNC owners learn without fear of an expensive mistake ending their progress. This is in addition to the standard 1-year warranty and applies regardless of where you purchase the machine.
Q: Can I use other CAM software like Fusion 360 or VCarve?
A: Yes. The Shapeoko 5.1 Pro accepts standard G-code from any CAM software — Fusion 360, VCarve, Aspire, MeshCAM, and others all work. Carbide Create is included free and handles most applications without needing a third-party package. Advanced 3D work is available via Carbide Create Pro (an upgrade available from Carbide 3D).
Q: Why buy from The Maker's Chest instead of directly from Carbide 3D?
A: Our 75-day return window gives you significantly more evaluation time than Carbide 3D's direct policy — enough time to assemble the machine, run real projects, and make a fully informed decision. Our USA-based expert support team is reachable by phone and email and provides an additional knowledgeable resource alongside Carbide 3D's own support. If the size you chose isn't right for your projects, or the machine isn't what you expected, we'll work with you on a return.
Specifications
ComMarker Genmitsu 3030-PROVer MAX Specifications:
1-Year Manufacturer Warranty covering mechanical and electronic components (excluding consumables).
60-Day “Mistakes Are On Us” Guarantee: Carbide 3D will replace damaged parts from user error within the first 60 days.
Supported by Carbide 3D’s U.S.-based technical support team and online training resources.
Shipping
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
OneLaser X Series Laser Engravers
OneLaser Hydra Series Laser Engravers
PiBurn Laser Rotary Accessories
Filtrabox Fume Extractors and Replacement Filters
BOFA Fume Extractors and Replacement Filters
Maxce IndexX Laser Marking Production Table
Theo Laser Welders
Crio DTF Printers
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
Why Buy From Us
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at The Maker's Chest.
✅ You get valuable bonuses with every purchase of a laser engraving machine that will add value to your entire business.
✅ Customers get exclusive access to the Materials Intelligence Library™, offering 550+ laser presets to get you started engraving.
✅ We offer a Lowest Price Guarantee. What does that mean? It means you are getting the lowest prices! If you find a lower price, call us!
✅ We offer FREE shipping* to the 48 contiguous United States and we've got a 75-day No Stress Returns Policy. We know that sometimes we change our minds, so our policy takes the stress out of your purchase.
✅ We offer local, US-based support that is available to guide you through your purchasing decisions. And we don't forget about you after that either!
✅ We're a family owned, small business. Our business is a reflection of ourselves, driven by strong values and a desire to do good for others.
We provide round the clockcustomer support. Even if we're not manning the phones late at night, you can reach out to us via email or chat on the website. Our official business hours are Monday - Friday, 9am - 5pm, but outside of these hours we're still here, and we'll get back to you as soon as we can!
Remember, we're always here to help, so give us a call on +1 833-962-5377, email us at support@themakerschest.com, or chat with us using the chat bubble in the bottom right corner of your screen.
Orders over $1,000 qualify — protect your shipment from loss or damage.
placeholder
Description
Specifications
Warranty
Shipping
Why Buy From Us
Description
[Heads up — Shapeoko CNC machines are not included in our free shipping offer and carry a flat $150 shipping fee, which will appear at checkout. This reflects Carbide 3D's distributor shipping policy, which we're required to honor as an official distributor. Also, Shapeoko 5.1 Pro leg kits have a lead time of 17 days. If ordering the legs, they will all ship as one package once the legs are available.]
The CNC Router Built to Run All Day, Every Day — and Everything You Need to Get Started.
The Shapeoko 5.1 Pro is a complete, production-capable CNC router system built on industrial-grade HG-15 linear rails and 16mm ballscrews — the same motion system used on CNC machines that cost ten times as much. Available in three sizes (2×2, 4×2, and 4×4), it ships with Carbide Create software, BitSetter, Hybrid T-slot Table, dust boot, clamps, and training — every component you need, from one company that actually supports all of it.
Why "Complete CNC Router" Matters More Than You Think
Most CNC routers are sold as a machine — but the machine is only part of what you need to actually cut parts. Workholding, dust collection, tool measurement, software, and training aren't included. You piece them together from different vendors, at extra cost, and when something goes wrong, nobody takes responsibility because there's no single company that owns the whole system.
The Shapeoko 5.1 Pro was built around a different philosophy. It's not just a CNC Router — it's a complete system of hardware, software, accessories, and training, built and supported in the USA, that will get you up and running as fast as possible.
Everything from the Hybrid Table to the BitSetter to Carbide Create to the dust boot is designed together, tested together, and supported together. If you have a problem — with the machine, the software, or even a specific project — you contact one team. No finger-pointing.
The Motion System: Industrial Components in a Workshop Machine
The Shapeoko 5.1 Pro is built from a rigid base, custom extrusions, linear rails, and ballscrews. No round rails, nothing unsupported, no belts, leadscrews, or gear racks. Every component in the motion system was chosen to eliminate the compromises that limit less serious machines.
HG-15 Linear Rails on Every Axis: These are industrial-grade rails built for machines far larger and heavier than the Shapeoko 5.1 Pro. Sealed and plugged to keep dust away from the bearings themselves. They provide the rigidity and precision that makes the difference between clean cuts and chatter marks, especially at higher feed rates in aluminum.
16mm Ballscrews on X and Y (20mm pitch): Ballscrews convert rotary motion to linear motion with minimal backlash and high positional accuracy. The custom dust wipers remove chips and debris from the screw before they can enter the drive mechanism — a maintenance detail that extends the machine's accuracy over years of use.
HDZ Z-Axis (from the Shapeoko HDM): The entire Z-axis was taken from the Shapeoko HDM and modified for the Shapeoko 5.1 Pro. It's the beefiest Z-axis they've ever made — a 16mm ballscrew with 10mm pitch that lifts a heavy 80mm spindle confidently. 6.1" of total Z travel, with 4" clearance from the table to the gantry with the Hybrid Table installed.
Precision-Machined Extrusions: All motion hardware mounts to extrusions that are machined in-house on industrial machining centers — not T-slots. No flex. No mounting surface error. The rails run true from end to end.
Three Sizes. One Machine Platform.
The Shapeoko 5.1 Pro is available in three cutting area configurations — the machine platform, electronics, and components are identical across all three. Choose the size that fits your workshop, your project scale, and your budget.
2×2 (24.53" × 24.53" travel): A perfect machine for smaller shops and big enough for real projects. The 2×2 handles sign blanks, cutting boards, custom furniture components, instrument parts, and aluminum plate work without the full footprint of the larger versions. Machine footprint is 35.5" × 35" — fits on most workbenches without dominating the shop. If space is your primary constraint, the 2×2 doesn't compromise on motion system quality — same HG-15 rails, same ballscrews, same electronics.
4×2 (48.7" × 24.53" travel): The most popular configuration for shops that need length but have limited depth. Full 4-foot length for doors, long panels, wide signs, and nested batches of smaller parts. Footprint is 60" × 35" — the same front-to-back depth as the 2×2, just wider.
4×4 (48.7" × 48.7" travel): The massive 48.7" × 48.7" work envelope provides capacity for full panels, furniture components, signage, and large-scale prototyping. Fits standard 4×8 sheet goods without cutting them down — you index the sheet through the open front-to-back design. Footprint is 60" × 59".
Software That's Actually Included and Actually Supported
The Shapeoko 5.1 Pro includes two software packages — both free, both maintained by Carbide 3D:
Carbide Create — 2D/3D CAD/CAM software for designing and generating toolpaths. Handles profiles, pockets, V-carving, inlays, 3D relief work, and more. Runs on Windows and macOS. Free forever with continuous updates. If you already have a preferred CAM package (Fusion 360, VCarve, Aspire), the 5.1 Pro accepts standard G-code from any source.
Carbide Motion — the machine controller software. Manages homing, jogging, job execution, tool changes, and BitSetter interaction. Actively maintained, optimized for Shapeoko, and free for all owners indefinitely.
Because Carbide 3D writes and supports both the machine and the software, you're never redirected to another company when a software question intersects with a machine question. One support team handles everything.
BitSetter — included with every machine. Automatically measures tool length after every tool change, enabling multi-tool jobs with automatic Z-compensation. No manual re-zeroing between tools.
Power Pendant — a 2-meter tethered remote control for emergency stop and feedhold. Mount it wherever you stand during jobs — no need to reach back to the machine to pause a cut.
The Hybrid Table: Workholding That Actually Works
Workholding — how you secure material to the machine — is one of the most challenging and most underappreciated aspects of CNC work. A machine with mediocre workholding wastes its own accuracy, because the part moves during the cut.
The Shapeoko 5.1 Pro's Hybrid Table combines T-slot tracks for clamps, fixtures, and vises with a solid base that provides a rigid, non-deflecting foundation for the machine itself. Six included Shapeoko Essentials Clamps and 12 Teez-Nutz T-nuts get you started with basic workholding immediately.
The front face of the machine includes M6×1 threaded holes for vertical workholding — tip a board up and use the gantry shift (3.15" forward clearance) for joinery operations like tenons and mortises that require end-grain access. This is a capability most desktop CNC routers simply don't have.
60-Day Mistakes Are On Us Guarantee
Learning CNC involves making mistakes. An expensive mistake during the learning period shouldn't end your CNC journey.
For the first 60 days of ownership, Carbide 3D will replace or repair any Carbide 3D-branded item that gets damaged — even if it's your fault. This is in addition to the standard one-year warranty on all parts and electronics. It's a policy that no other CNC router manufacturer offers at this level, and it's one of the most meaningful differentiators in the category.
This guarantee is Carbide 3D's direct policy and applies regardless of where you purchase the machine.
The Maker's Chest Difference
The Shapeoko 5.1 Pro is available from Carbide 3D directly and from official resellers. Here's what changes when you order through The Maker's Chest:
🛡️ 75-day returns — significantly longer than Carbide 3D's direct return policy. Enough time to assemble the machine, run your first cuts on your actual materials, evaluate whether it fits your workflow, and make an informed decision
🇺🇸 Expert USA-based technical support — our team can help with assembly questions, first-cut setup, Carbide Create and CAM workflow, and production issues that arise after you're up and running
📞 Dual lines of support — phone and email, so when you're mid-job and something needs attention, you have a direct path to a real person in addition to Carbide 3D's own support
🔧 Straight size guidance — 2×2, 4×2, or 4×4? Not sure which cutting area fits your actual projects and workspace? Talk to us before you order. We'll help you choose correctly the first time
Note on shipping: The Shapeoko 5.1 Pro ships in multiple boxes. A flat shipping fee applies and will appear at checkout — this reflects Carbide 3D's distributor shipping policy, which we honor as an official reseller.
Frequently Asked Questions About the Shapeoko 5 Pro 2×2
Q: Which size should I choose — 2×2, 4×2, or 4×4?
A: Think about the largest single piece you'll regularly cut and what fits in your shop. The 2×2 (24.5" × 24.5" travel) handles most small-to-medium projects — cutting boards, signs, parts, panels up to about 2 feet. Footprint is workbench-sized. The 4×2 (48.7" × 24.5" travel) adds 4-foot length for doors, long panels, and larger signage without adding shop depth. The 4×4 (48.7" × 48.7" travel) processes full 4-foot wide material and is the choice for furniture, large signage, and batch production. The motion system and components are identical across all three — you're choosing workspace, not machine quality.
Q: The listing says I need to add my own router. Which one should I get?
A: The Carbide Compact Router is the simplest choice — designed specifically for CNC use, includes precision collets and replacement brushes, runs on 110V. It's reliable, quiet enough for a workshop, and pairs perfectly with Carbide Create's RPM recommendations. The Carbide VFD Spindle is the step up for longer production runs — water-cooled, quieter, and RPM is set automatically by your G-code rather than manually. Add either one at checkout. If you already own a Makita RT0701C or similar 65mm router, that's compatible too.
Q: What materials can it cut?
A: Any species of wood, plywood, and MDF. All common plastics including acrylic, ABS, HDPE, Delrin, PEEK, and polypropylene. Non-ferrous metals including aluminum and brass. Wax, foam, and polyurethane tooling board. For stone and ceramic, the MC Etcher drag engraver accessory enables surface engraving. The 5.1 Pro cannot cut ferrous metals (steel, cast iron) — that requires a dedicated metal-cutting CNC machine.
Q: How is the Shapeoko 5.1 Pro different from the Shapeoko HDM?
A: The Shapeoko HDM is a more powerful machine and ideal if you want to primarily cut aluminum and brass. The Shapeoko 5.1 Pro is pretty close to being as good when paired with Carbide 3D's VFD spindle, at a lower price point with larger cutting size options available. The HDM's key differentiators are the integrated water-cooled spindle (included, not purchased separately), heavier extrusions optimized for sustained metal cutting, and an all-aluminum Hybrid Table. If aluminum and brass are your primary daily materials and you want a machine purpose-built for metal, the HDM is worth the step up. If your primary work is wood and plastics with occasional aluminum, the 5.1 Pro delivers excellent value.
Q: Do I need a shop vacuum?
A: Not required, but strongly recommended. The included Sweepy V2 dust boot connects to any standard shop vacuum and contains chips and dust at the cutting zone. Running without dust collection is possible but creates buildup in the machine's motion components and your workspace. If you have a shop vacuum, you'll want to use it.
Q: What is the 60-Day Mistakes Are On Us Guarantee?
A: For the first 60 days of ownership, Carbide 3D will replace or repair any Carbide 3D-branded component that's damaged — even through operator error. A broken bit, a crashed Z-axis, a broken clamp — covered. It's designed to let new CNC owners learn without fear of an expensive mistake ending their progress. This is in addition to the standard 1-year warranty and applies regardless of where you purchase the machine.
Q: Can I use other CAM software like Fusion 360 or VCarve?
A: Yes. The Shapeoko 5.1 Pro accepts standard G-code from any CAM software — Fusion 360, VCarve, Aspire, MeshCAM, and others all work. Carbide Create is included free and handles most applications without needing a third-party package. Advanced 3D work is available via Carbide Create Pro (an upgrade available from Carbide 3D).
Q: Why buy from The Maker's Chest instead of directly from Carbide 3D?
A: Our 75-day return window gives you significantly more evaluation time than Carbide 3D's direct policy — enough time to assemble the machine, run real projects, and make a fully informed decision. Our USA-based expert support team is reachable by phone and email and provides an additional knowledgeable resource alongside Carbide 3D's own support. If the size you chose isn't right for your projects, or the machine isn't what you expected, we'll work with you on a return.
Specifications
ComMarker Genmitsu 3030-PROVer MAX Specifications:
1-Year Manufacturer Warranty covering mechanical and electronic components (excluding consumables).
60-Day “Mistakes Are On Us” Guarantee: Carbide 3D will replace damaged parts from user error within the first 60 days.
Supported by Carbide 3D’s U.S.-based technical support team and online training resources.
Shipping
We offer FREE Shipping* throughout the 48 contiguous United States! Yes, no hidden costs at checkout!
*This is with the exception of the following brands of products at the moment, on which we DO have to charge shipping:
OneLaser X Series Laser Engravers
OneLaser Hydra Series Laser Engravers
PiBurn Laser Rotary Accessories
Filtrabox Fume Extractors and Replacement Filters
BOFA Fume Extractors and Replacement Filters
Maxce IndexX Laser Marking Production Table
Theo Laser Welders
Crio DTF Printers
Summary
Order cutoff: 5pm PST
Order handling: 1-3 days
Order transit: 3-7 days
Free shipping to the contiguous United States
Order Confirmation & Dispatch As soon as you place an order with us you'll receive an order confirmation email, and we'll get working to have your order dispatched as soon as we can.
Typically, we'll dispatch your order within 1 business day, however this can vary depending on the product and our warehouses, so please allow up to 3 business days.
Once your order has dispatched from our warehouse, you'll receive shipping confirmation within 24 hours of your order leaving our warehouse.
General Delivery Timeframes Delivery timeframes will vary dependent on your location and the items you've ordered.
In general, these are the delivery timeframes you can expect:
1-7 Business Days - Delivery within the contiguous United States
The above is intended to be used as a guide, and may not apply in all cases. Some products may have specific 'Delivery Timeframe' information, which can be found on its own tab, or on the main 'Description' tab of the product.
Home Delivery (Bulky Items)
This service is generally for products over 40kg in weight, as it is a requirement for these products to be palletised for delivery.
This service utilises power tailgates with two-man crews or crane trucks when required and this is included in the quoted price.
The receiver will be contacted prior to delivery to arrange a suitable delivery date and time. Deliveries are scheduled for either an AM or PM slot on any given day.
Delivery is to front car port, driveway, doorstep or wherever practical depending upon site access. Drivers are not permitted to move item(s) within the residence or around the property due to OHS reasons.
This service assumes reasonable and safe access to the site is available. Overhanging trees, steep driveways, unsealed driveways, narrow driveways or streets or an unforeseen obstruction may deem the delivery unavailable.
If your delivery address is in a regional or remote location, we recommend shipping to the nearest depot as the most affordable option.
Other Terms & Conditions
If you happen to miss the delivery, you will be required to pick up your item(s) from the freight company's depot. Re-delivery can be arranged to your home, however this will incur extra costs.
We can't advise on the exact time and day the delivery will occur as this is not within our control, however you will be emailed the tracking details where you will be able to contact the freight company for more accurate timeframes.
It is your responsibility to advise us if:
someone will be available to sign for delivery.
there's somewhere safe the item can be left if no one will be home.
if the address is a business address, as we will require the business hours of the business and name of the building.
you notice any damage. If so, you should make note of it when signing for delivery or do not agree to accept the delivery. If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging. If your item(s) do arrived damaged please send photos to support@themakerschest.com, then visit our returns page and lodge your return claim online.
Why Buy From Us
We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at The Maker's Chest.
✅ You get valuable bonuses with every purchase of a laser engraving machine that will add value to your entire business.
✅ Customers get exclusive access to the Materials Intelligence Library™, offering 550+ laser presets to get you started engraving.
✅ We offer a Lowest Price Guarantee. What does that mean? It means you are getting the lowest prices! If you find a lower price, call us!
✅ We offer FREE shipping* to the 48 contiguous United States and we've got a 75-day No Stress Returns Policy. We know that sometimes we change our minds, so our policy takes the stress out of your purchase.
✅ We offer local, US-based support that is available to guide you through your purchasing decisions. And we don't forget about you after that either!
✅ We're a family owned, small business. Our business is a reflection of ourselves, driven by strong values and a desire to do good for others.
We provide round the clockcustomer support. Even if we're not manning the phones late at night, you can reach out to us via email or chat on the website. Our official business hours are Monday - Friday, 9am - 5pm, but outside of these hours we're still here, and we'll get back to you as soon as we can!
Remember, we're always here to help, so give us a call on +1 833-962-5377, email us at support@themakerschest.com, or chat with us using the chat bubble in the bottom right corner of your screen.
