{"product_id":"onelaser-chiller-for-hydra-cobra","title":"OneLaser Chiller For Hydra \u0026 Cobra Glass Tube Laser System","description":"\u003ch2\u003eThe Chiller Every OneLaser Glass-Tube CO2 Laser Needs to Survive Its First Week\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(127, 29, 29);\"\u003e\u003cem\u003eThe OneLaser CW-5200 delivers \u003cstrong\u003e1,400W of cooling capacity\u003c\/strong\u003e and \u003cstrong\u003e±0.3°C temperature control\u003c\/strong\u003e — sized for a single \u003cstrong\u003e150W\u003c\/strong\u003e or dual \u003cstrong\u003e100W\u003c\/strong\u003e glass CO2 laser tube, and required (not optional) on every Cobra and glass-tube Hydra system.\u003c\/em\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eA glass CO2 laser tube generates serious heat the moment you fire it. Without a closed-loop chiller holding that tube at a stable, precise temperature, the glass cracks, the seal fails, or the tube's output degrades within hours — not months. This isn't an upgrade accessory; it's the component standing between your laser tube and a repair bill that costs more than the chiller itself. If your OneLaser machine runs a glass CO2 tube, this chiller isn't a nice-to-have. It's part of the machine.\u003c\/p\u003e\n\u003ch3\u003e1,400W of Cooling, Sized for Real Production Loads\u003c\/h3\u003e\n\u003cp\u003eThe CW-5200 is rated for \u003cstrong\u003e1,400W of cooling capacity\u003c\/strong\u003e (5,084 BTU\/h) — enough to run a single \u003cstrong\u003e150W glass CO2 tube\u003c\/strong\u003e or \u003cstrong\u003etwo 100W tubes\u003c\/strong\u003e simultaneously without the temperature climbing during long engraving or cutting runs. A \u003cstrong\u003e0.52kW compressor\u003c\/strong\u003e with built-in overcurrent protection keeps output stable even during back-to-back production jobs, not just occasional hobby use.\u003c\/p\u003e\n\u003ch3\u003eDual-Mode Temperature Control, Accurate to ±0.3°C\u003c\/h3\u003e\n\u003cp\u003eThe CW-5200 holds your tube's coolant temperature to within \u003cstrong\u003e±0.3°C\u003c\/strong\u003e using two selectable control modes: \u003cstrong\u003eConstant mode\u003c\/strong\u003e, which locks to a fixed temperature you set between 5–40°C, and \u003cstrong\u003eIntelligent mode\u003c\/strong\u003e, which automatically adjusts based on ambient room temperature. That precision matters — a glass tube running even a few degrees outside its optimal range loses beam quality and shortens its own lifespan.\u003c\/p\u003e\n\u003ch3\u003eMulti-Layer Alarm and Protection System\u003c\/h3\u003e\n\u003cp\u003eFour separate safeguards protect your laser tube from a chiller failure turning into a machine failure: a \u003cstrong\u003eflow alarm\u003c\/strong\u003e that triggers if coolant circulation drops or stops, an \u003cstrong\u003eover-temperature alarm\u003c\/strong\u003e if the water gets too hot to protect the tube, \u003cstrong\u003ecompressor overcurrent protection\u003c\/strong\u003e, and \u003cstrong\u003ecompressor time-delay protection\u003c\/strong\u003e that prevents short-cycling damage on restart. If something goes wrong with the cooling loop, you'll know before your tube does.\u003c\/p\u003e\n\u003ch3\u003e6L Tank and 10L\/min Flow Rate for Continuous Runs\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003e6-liter built-in tank\u003c\/strong\u003e paired with a \u003cstrong\u003e10L\/min maximum flow rate\u003c\/strong\u003e gives the CW-5200 enough thermal buffer to handle sustained cutting jobs without the coolant temperature drifting mid-run. \u003cstrong\u003e10mm brass inlet and outlet connectors\u003c\/strong\u003e make plumbing into your Cobra or Hydra's existing tube lines straightforward — no proprietary fittings to source separately.\u003c\/p\u003e\n\u003ch3\u003eCompact Footprint, Simple to Place and Run\u003c\/h3\u003e\n\u003cp\u003eAt \u003cstrong\u003e49 × 29 × 40.5cm\u003c\/strong\u003e and \u003cstrong\u003e27kg\u003c\/strong\u003e, the CW-5200 sits beside or under most Cobra and Hydra cabinets without needing dedicated floor space. Setup is limited to running two water lines and a power cable — no additional configuration, software, or calibration required before your first engrave.\u003c\/p\u003e\n\u003ch3\u003eEnvironmentally Responsible Refrigerant\u003c\/h3\u003e\n\u003cp\u003eThe CW-5200 uses a \u003cstrong\u003eR-32 \/ R-1234yf \/ R-513A refrigerant blend\u003c\/strong\u003e (360g charge) — lower-GWP options than older R-22-based chillers, so you get industrial cooling performance without the environmental and phase-out concerns tied to legacy refrigerants.\u003c\/p\u003e\n\u003ch3\u003eWhich OneLaser Machines Require This Chiller\u003c\/h3\u003e\n\u003cp\u003eThis chiller is compatible with, and required for, any OneLaser machine running a glass CO2 laser tube:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCobra 8\u003c\/strong\u003e (90W glass CO2 tube)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCobra 10\u003c\/strong\u003e (100W glass CO2 tube)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCobra 14\u003c\/strong\u003e (130W glass CO2 tube)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydra 9\u003c\/strong\u003e (100W glass CO2 \/ 38W RF hybrid — chiller required for the glass tube side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydra 13\u003c\/strong\u003e (130W glass CO2 \/ 38W or 70W RF hybrid — chiller required for the glass tube side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydra 16\u003c\/strong\u003e (150W glass CO2 \/ 38W RF hybrid — chiller required for the glass tube side)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is \u003cstrong\u003enot required\u003c\/strong\u003e for machines running an RF metal tube only, such as the current Hydra 7 (RF-only configuration) or the OneLaser XRF and X series — those tubes are air-cooled by design.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOneLaser CW-5200 industrial water chiller (built-in 6L tank and pump)\u003c\/li\u003e\n\u003cli\u003eSealed hoops x 2\u003c\/li\u003e\n\u003cli\u003eAlarm signal output plug\u003c\/li\u003e\n\u003cli\u003eSpare fuses x 5\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eOperating manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Capacity:\u003c\/strong\u003e 1,400W (5,084 BTU\/h \/ 1.49kW \/ 1,281 kcal\/h)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tube Configuration:\u003c\/strong\u003e Single 150W or dual 100W glass CO2 laser tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e 0.52kW \/ 0.71HP, with overcurrent protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Control Accuracy:\u003c\/strong\u003e ±0.3°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Modes:\u003c\/strong\u003e Constant mode (manual set, 5–40°C) and Intelligent mode (auto-adjusts to ambient temperature)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Capacity:\u003c\/strong\u003e 6L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 10L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Power:\u003c\/strong\u003e 0.03kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 10mm brass inlet\/outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R-32 \/ R-1234yf \/ R-513A (360g charge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e AC 110V, 2.4–3.1A, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 49 × 29 × 40.5cm (L × W × H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 27kg (59.5 lbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eThis chiller is covered under OneLaser's manufacturer warranty against defects in materials and workmanship. Purchases through The Maker's Chest are covered by our standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e, giving you real evaluation time before you're committed.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Capacity:\u003c\/strong\u003e 1,400W (5,084 BTU\/h \/ 1.49kW \/ 1,281 kcal\/h)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tube Configuration:\u003c\/strong\u003e Single 150W or dual 100W glass CO2 laser tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor:\u003c\/strong\u003e 0.52kW \/ 0.71HP, with overcurrent protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Control Accuracy:\u003c\/strong\u003e ±0.3°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Modes:\u003c\/strong\u003e Constant mode (manual set, 5–40°C) and Intelligent mode (auto-adjusts to ambient temperature)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank Capacity:\u003c\/strong\u003e 6L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow Rate:\u003c\/strong\u003e 10L\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump Power:\u003c\/strong\u003e 0.03kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 10mm brass inlet\/outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R-32 \/ R-1234yf \/ R-513A (360g charge)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e AC 110V, 2.4–3.1A, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 49 × 29 × 40.5cm (L × W × H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 27kg (59.5 lbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eThis chiller is covered under OneLaser's manufacturer warranty against defects in materials and workmanship. Purchases through The Maker's Chest are covered by our standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e, giving you real evaluation time before you're committed.\u003c\/p\u003e","brand":"OneLaser","offers":[{"title":"Default Title","offer_id":57166363164838,"sku":"ACC-CL-CW5200-US01","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/CW5200_Industrial_Chiller.png?v=1788843291","url":"https:\/\/themakerschest.com\/products\/onelaser-chiller-for-hydra-cobra","provider":"The Maker's Chest","version":"1.0","type":"link"}