{"title":"Portable Laser Cleaning Machines","description":"\u003cp\u003eNeed to clean rust or paint on site instead of hauling parts back to the shop? A portable laser cleaning machine packs a fiber laser, controls, and air cooling into a backpack, suitcase, or wheeled cart, \u003cstrong\u003ewith no water chiller to fill or drain\u003c\/strong\u003e. Backpack-style portable laser cleaners put the handheld head at under a kilogram, so you can work on trailers, boats, and equipment where they sit.\u003c\/p\u003e\u003cp\u003eAt The Maker's Chest, every portable laser cleaner in this collection is air-cooled, from backpack-style 100W pulsed units to 2,000W continuous-wave cabinets on casters. Most run on standard single-phase power, and \u003cstrong\u003eseveral pulsed models accept both 110V and 220V\u003c\/strong\u003e. Comparing a portable laser rust removal machine for field work? \u003cstrong\u003eWe will help you weigh power against carry weight\u003c\/strong\u003e and outlet access.\u003c\/p\u003e\u003ch2\u003eShop Portable Laser Cleaners Built for Jobsite Work\u003c\/h2\u003e","products":[{"product_id":"herolaser-1500w-continuous-laser-cleaning-machine","title":"Herolaser 1500W Continuous Laser Cleaning Machine","description":"\u003ch2\u003eHerolaser 1500W Continuous Laser Cleaning Machine: Industrial Rust and Coating Removal for $6,799\u003c\/h2\u003e\n\u003ch3 style=\"color: #7F1D1D;\"\u003e\u003cem\u003eStrip rust, paint, oil, and coatings from steel and other metal surfaces with a \u003cstrong\u003e1500W continuous-wave fiber laser\u003c\/strong\u003e that runs air-cooled for 8+ hours without overheating — no media, chemicals, or blasting cabinet required.\u003c\/em\u003e\u003c\/h3\u003e\n\n\u003cp\u003eGrinding, sandblasting, and chemical strippers all remove material from the base metal along with the rust or coating — and they leave dust, spent media, or hazardous runoff behind. The Herolaser 1500W Continuous Laser Cleaning Machine instead uses focused laser energy to ablate rust, paint, oil, and oxide layers off a metal surface, leaving the substrate underneath intact. It plugs into standard shop power, runs handheld from a lightweight cleaning head, and needs no compressed air, abrasive media, or solvent disposal.\u003c\/p\u003e\n\u003cp\u003eThis is the entry tier of Herolaser's continuous-wave cleaning lineup: a \u003cstrong\u003e1500W\u003c\/strong\u003e unit built for shops doing light-to-medium rust, oil, and coating removal on smaller parts and production runs where the heavier \u003cstrong\u003e2000W\u003c\/strong\u003e tier's extra speed and higher price aren't needed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner3.jpg?v=1787800260\" alt=\"Herolaser 1500W Continuous Laser Cleaning Machine removing rust and coatings from metal with handheld laser cleaner\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cstrong\u003e1500W Continuous-Wave Fiber Laser\u003c\/strong\u003e for Steady, Repeatable Cleaning Power\u003c\/h3\u003e\n\u003cp\u003eThe machine is built around a \u003cstrong\u003e1500W continuous-wave (CW) fiber laser source\u003c\/strong\u003e, meaning the beam delivers a steady, uninterrupted stream of energy rather than short high-power pulses. That steady output is what makes continuous-wave cleaners well suited to bulk rust, mill scale, and thick coating removal on robust metal substrates: the sustained thermal energy breaks down and vaporizes contaminant layers efficiently across a surface. The tradeoff, inherent to any CW cleaning laser and not unique to this unit, is a heat-affected zone (HAZ) on the treated surface — a byproduct of the same thermal action that makes the cleaning fast. For thick steel, cast iron, structural parts, and other robust metal substrates where a light heat mark is a non-issue, that tradeoff is the right one to make for the speed gained.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner2.jpg?v=1787800260\" alt=\"Herolaser 1500W Continuous Laser Cleaning Machine continuous-wave laser cleaning on steel and metal surfaces\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAir-Cooled Design Runs 8+ Hours Without a Water Chiller\u003c\/h3\u003e\n\u003cp\u003eRather than relying on a water-cooled chiller loop — standard on many higher-power industrial cleaning lasers and a maintenance point of its own (coolant changes, hose checks, freeze risk in cold shops) — this unit uses an \u003cstrong\u003eindustrial-grade air-cooling system\u003c\/strong\u003e that Herolaser states holds internal temperatures \u003cstrong\u003eunder 104°F (40°C) even after 8+ hours of continuous operation\u003c\/strong\u003e. For a shop running the machine through a full production shift, that means no chiller to plumb, drain, or top off, and one less system that can fail mid-job. The practical consequence is a simpler footprint: the machine plugs in, warms up, and runs.\u003c\/p\u003e\n\n\u003ch3\u003e16.4 ft (5m) Heavy-Duty Cord for Working Room Around Larger Parts\u003c\/h3\u003e\n\u003cp\u003eThe cleaning head connects back to the machine on a \u003cstrong\u003e16.4 ft (5m) heavy-duty cord\u003c\/strong\u003e, giving the operator working radius to move around a part, a vehicle chassis, or a fixed structural piece without repositioning the whole unit. Herolaser specifically advises against extending this cord, which is typical for laser cleaning systems — the cable carries both the fiber optic beam path and the head's control\/power lines, and splicing an extension risks beam attenuation or signal loss that a simple garden-hose-style extension cord wouldn't cause. Plan the machine's placement around that 16.4 ft working radius rather than around an extension cord.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/cleaner6.jpg?v=1787800260\" alt=\"Herolaser 1500W Continuous Laser Cleaning Machine handheld cleaning head and air-cooled equipment detail\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDual Working Mode: Continuous and Modulated Output\u003c\/h3\u003e\n\u003cp\u003ePer Herolaser's published spec sheet, the machine supports both \u003cstrong\u003econtinuous and modulated\u003c\/strong\u003e working modes from the same laser source. Running in straight continuous mode delivers the steady, maximum-throughput output described above for stripping thicker layers; switching to modulated mode pulses that same CW source on and off at a controllable rate, giving the operator a way to dial back aggressiveness on a lighter contaminant or a pass where full continuous heat input isn't needed. This is a control-panel setting on the machine itself, not a hardware swap — the operator adjusts it for the surface in front of them without changing equipment.\u003c\/p\u003e\n\n\u003ch3\u003eFiber-Optic Beam Delivery at a Standard 1080nm Wavelength\u003c\/h3\u003e\n\u003cp\u003eThe laser operates at a \u003cstrong\u003ecentral wavelength of approximately 1080nm (±10nm)\u003c\/strong\u003e per Herolaser's spec sheet — the standard output wavelength for fiber lasers used across the industrial cleaning and welding equipment category, chosen because metals absorb energy at that wavelength efficiently while the beam still travels cleanly through fiber-optic cable to a lightweight handheld head. That's what makes a fiber cleaning laser handheld and cable-fed in the first place, unlike CO2 laser systems, which need mirrors and a rigid beam path and are essentially never built as handheld tools.\u003c\/p\u003e\n\n\u003ch3\u003eRust, Paint, Oil, and Coating Removal on Metal Surfaces\u003c\/h3\u003e\n\u003cp\u003eHerolaser positions this unit specifically for \u003cstrong\u003erust, paint, oil, and coating removal from metal surfaces\u003c\/strong\u003e — the core use case for a mid-power CW cleaning laser in a metal fabrication shop, auto restoration bay, mold shop, or industrial maintenance operation. Compared to sandblasting, laser cleaning at this power level leaves no spent media to sweep up and no risk of embedding abrasive grit into a surface that later needs welding or coating; compared to chemical paint stripping, there's no solvent to neutralize or dispose of. For a shop already budgeting for grinding wheels, blast media, or stripper by the drum, the laser's running cost after the equipment purchase is essentially just electricity.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/1_banner.png?v=1787800261\" alt=\"Herolaser 1500W Continuous Laser Cleaning Machine rust paint oil and coating removal specifications\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHerolaser 1500W Continuous Laser Cleaning Machine (main unit)\u003c\/li\u003e\n\u003cli\u003eHandheld cleaning head with 16.4 ft (5m) connecting cord\u003c\/li\u003e\n\u003cli\u003eStandard power cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 1500W continuous-wave fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type \/ Source:\u003c\/strong\u003e Fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Mode:\u003c\/strong\u003e Continuous \u0026amp; modulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Wavelength:\u003c\/strong\u003e ~1080nm (±10nm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Air-cooled; holds under 104°F (40°C) after 8+ hours continuous operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Head Cord Length:\u003c\/strong\u003e 16.4 ft (5m) heavy-duty cord (extensions not recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Rust, paint, oil, and coating removal on metal surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e $6,799 USD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month (1-year) manufacturer warranty, as stated on Herolaser's product page.\u003c\/p\u003e\n\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🛡️ TMC's standard 75-day return window — Herolaser is not on TMC's return-exclusion list the way some other brands in our catalog are\u003c\/li\u003e\n\u003cli\u003e💬 U.S.-based pre-sale and setup support from a team that can help you decide between the 1500W and 2000W tier before you buy\u003c\/li\u003e\n\u003cli\u003e✅ Every unit is inspected before it ships, so the machine that arrives has already been verified to power on and run correctly\u003c\/li\u003e\n\u003cli\u003e🔧 Herolaser's 12-month manufacturer warranty honored and supported through TMC, with claims handled directly by our team\u003c\/li\u003e\n\u003cli\u003e📦 Ships from U.S. inventory rather than direct overseas freight\u003c\/li\u003e\n\u003cli\u003e🗣️ Real, specific answers on cleaning mode, wattage, and setup from a team that has actually run laser cleaning equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHerolaser 1500W vs. 2000W Continuous Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003eHerolaser sells this 1500W continuous-wave cleaner alongside a 2000W tier in the same product line. Both share the same air-cooled design and the same 16.4 ft (5m) heavy-duty cord — the two tiers differ primarily in laser output power, price, and cleaning speed on heavier work.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x:auto;\"\u003e\n\u003ctable style=\"width:100%; border-collapse: collapse;\" border=\"1\" cellpadding=\"8\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHerolaser 1500W (this listing)\u003c\/th\u003e\n\u003cth\u003eHerolaser 2000W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1500W\u003c\/strong\u003e continuous-wave fiber\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e2000W\u003c\/strong\u003e continuous-wave fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e$6,799\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003e$9,500\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eAir-cooled, \u0026lt;104°F after 8+ hrs\u003c\/td\u003e\n\u003ctd\u003eAir-cooled, \u0026lt;104°F after 8+ hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord length\u003c\/td\u003e\n\u003ctd\u003e16.4 ft (5m)\u003c\/td\u003e\n\u003ctd\u003e16.4 ft (5m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eRust, paint, oil, coating removal — metal\u003c\/td\u003e\n\u003ctd\u003eRust, paint, oil, coating removal — metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the 1500W\u003c\/strong\u003e if your work is light-to-medium rust, oil, and coating removal on smaller parts and shorter runs, and the lower price point matters more than extra headroom.\u003cbr\u003e\n\u003cstrong\u003eChoose the 2000W\u003c\/strong\u003e if you're regularly clearing heavier rust, thicker coatings, or larger steel surfaces where the added power translates to meaningfully faster cleaning per square foot.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions about Herolaser 1500W Continuous Laser Cleaning Machine\u003c\/h2\u003e\n\n\u003cstrong\u003eQ: What's the difference between the 1500W and 2000W Herolaser continuous cleaners?\u003c\/strong\u003e\u003cbr\u003e\nA: Laser output power and price — 1500W at $6,799 vs. 2000W at $9,500. Both share the same air-cooled design and cord length. The 2000W tier cleans faster on heavier rust and larger surfaces; the 1500W tier is sized for light-to-medium rust, oil, and coating removal.\n\u003chr\u003e\n\u003cstrong\u003eQ: What materials can this machine clean?\u003c\/strong\u003e\u003cbr\u003e\nA: Metal surfaces only — Herolaser markets this unit specifically for rust, paint, oil, and coating removal on metal. It is not intended for wood, plastic, or other non-metal substrates.\n\u003chr\u003e\n\u003cstrong\u003eQ: Do I need training or certification to operate this?\u003c\/strong\u003e\u003cbr\u003e\nA: No formal certification is required, but laser cleaning equipment at this power level is a Class 4 laser product and requires proper laser safety eyewear, ventilation for fumes generated during cleaning, and basic operator training on safe handheld laser use before first use.\n\u003chr\u003e\n\u003cstrong\u003eQ: Is this safe to run in a home shop?\u003c\/strong\u003e\u003cbr\u003e\nA: It can be, with the same precautions as any Class 4 industrial laser: rated safety glasses for the beam's wavelength, a well-ventilated space (or fume extraction) since cleaning vaporizes rust\/paint\/coating material, and keeping bystanders and reflective surfaces clear of the beam path. It draws significant power on startup and during operation — confirm your shop's electrical service can support it with Herolaser or TMC before installation.\n\u003chr\u003e\n\u003cstrong\u003eQ: What power\/outlet does this machine need?\u003c\/strong\u003e\u003cbr\u003e\nA: Confirm electrical requirements with Herolaser or TMC before purchase if your shop's power service is a constraint.\n\u003chr\u003e\n\u003cstrong\u003eQ: Is the warranty valid when I buy through The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. TMC sells genuine Herolaser units, and the manufacturer's 12-month warranty applies as stated on Herolaser's product listing.\n\u003chr\u003e\n\u003cstrong\u003eQ: What's TMC's return policy on this machine?\u003c\/strong\u003e\u003cbr\u003e\nA: TMC's standard 75-day return window applies to this listing.\n\u003chr\u003e\n\u003cstrong\u003eQ: Why buy this through The Maker's Chest instead of direct from the manufacturer?\u003c\/strong\u003e\u003cbr\u003e\nA: TMC ships from U.S. inventory and provides pre-sale and setup support, backed by TMC's standard 75-day return window.\n\u003chr\u003e\n\u003cstrong\u003eQ: What's the difference between a pulsed and a continuous-wave (CW) laser cleaner, and which does TMC sell as this product?\u003c\/strong\u003e\u003cbr\u003e\nA: This Herolaser 1500W unit is a \u003cstrong\u003econtinuous-wave (CW)\u003c\/strong\u003e cleaner — it emits a steady beam and is built for faster removal of heavier rust, thick coatings, and mill scale on robust metal substrates, generally at the cost of a visible heat-affected zone on the treated surface. Pulsed laser cleaners emit short, high-intensity bursts instead of a steady beam, which limits heat buildup and makes them better suited to light rust and precision cleaning on heat-sensitive materials without discoloring or warping the substrate. If your work is mostly heavy rust or coating removal on thick steel, a CW machine like this one is the faster tool; if you're doing precision or delicate cleaning where substrate heat damage is a concern, look at a pulsed cleaner instead.\n\u003chr\u003e\n\u003cstrong\u003eQ: Does this machine include a water chiller?\u003c\/strong\u003e\u003cbr\u003e\nA: No. This unit is air-cooled, not water-cooled — Herolaser states it holds under 104°F (40°C) internal temperature after 8+ hours of continuous operation without a chiller loop.\n\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHerolaser 1500W Continuous Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 1500W continuous-wave fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type \/ Source:\u003c\/strong\u003e Fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Mode:\u003c\/strong\u003e Continuous \u0026amp; modulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentral Wavelength:\u003c\/strong\u003e ~1080nm (±10nm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Air-cooled; holds under 104°F (40°C) after 8+ hours continuous operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Head Cord Length:\u003c\/strong\u003e 16.4 ft (5m) heavy-duty cord (extensions not recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Rust, paint, oil, and coating removal on metal surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrice:\u003c\/strong\u003e $6,799 USD\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eHerolaser backs this machine with a \u003cstrong\u003e12-month (1-year) manufacturer warranty\u003c\/strong\u003e, as stated on the supplier's product page. The Maker's Chest applies its standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e to this listing.\u003c\/p\u003e","brand":"Herolaser","offers":[{"title":"Default Title","offer_id":57194425516198,"sku":"ML-QF-FL-SC-HW1500","price":6799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/herolaser-1500w-main-1x1.jpg?v=1794452056"},{"product_id":"herolaser-2000w-continuous-laser-cleaning-machine","title":"Herolaser 2000W Continuous Laser Cleaning Machine","description":"\u003ch2\u003eStrip Rust, Paint, and Oil at 2000W — The Highest-Power Handheld Cleaner in the Herolaser Lineup, No Media or Chemicals Required\u003c\/h2\u003e\n\u003ch3 style=\"color: #7F1D1D;\"\u003e\u003cem\u003eThe \u003cstrong\u003eHerolaser 2000W Continuous Laser Cleaning Machine\u003c\/strong\u003e delivers more cleaning headroom than our 1500W model for shops running heavier corrosion, thicker coatings, or back-to-back jobs — with the same air-cooled, plug-in-and-go simplicity.\u003c\/em\u003e\u003c\/h3\u003e\n\n\u003cp\u003eGrinding, sandblasting, and chemical strippers all remove material from a surface — they just also remove time, consumables, and often a layer of good metal along with the rust. A handheld laser cleaner replaces that whole process with a beam: point it at the surface, and the laser selectively ablates rust, paint, oil film, or coating without media, dust clouds, or harsh solvents.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHerolaser 2000W\u003c\/strong\u003e is the higher-power tier of Herolaser's continuous-wave (CW) cleaning line, built for shops that need to move faster through heavier corrosion or thicker coatings than a 1500W unit is comfortable handling, while still running off a standard air-cooled setup with no external chiller to plumb in.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/cleaner2.jpg?v=1787800558\" alt=\"Herolaser 2000W Continuous Laser Cleaning Machine handheld laser cleaner removing rust and coatings from metal\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e2000W of Continuous-Wave Output for Heavier-Duty Cleaning Jobs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003e2000W\u003c\/strong\u003e designation is the laser's rated continuous-wave output — the beam runs at a steady, sustained power level rather than firing in short high-peak pulses. In practice, more continuous wattage means the laser can ablate thicker rust scale, heavier mill scale, and multi-layer coatings in fewer passes than a lower-wattage unit, because there's more sustained energy hitting the surface per second. A 1500W-class machine can still clean the same materials, it just needs more passes or more time to cut through heavy buildup — so the practical benefit of stepping up to 2000W shows up most on jobs with thick or long-neglected corrosion, larger surface areas, or shops running the machine for extended stretches per day.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/cleaner7.jpg?v=1787800559\" alt=\"Herolaser 2000W Continuous Laser Cleaning Machine heavy rust and coating removal on metal surface\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eContinuous Wave, Not Pulsed — a Different Tool for a Different Job\u003c\/h3\u003e\n\u003cp\u003eLaser cleaners split into two families: pulsed and continuous wave (CW). Pulsed lasers fire extremely short, high-peak-power bursts that knock contamination off a surface with minimal heat buildup, which is why they're favored for delicate work like mold cleaning or light surface prep where the base material can't take much thermal load. CW lasers like this one instead deliver a steady beam that heats and vaporizes material continuously, which trades some of that delicacy for significantly faster material removal on heavier jobs — rust scale, paint buildup, oil and grease films, and mill scale on structural steel. The practical consequence: a CW machine like the Herolaser 2000W is the better fit for high-throughput industrial and fabrication cleaning where speed matters more than micron-level precision, while a pulsed cleaner is the better fit for detail and mold-cleaning work. Herolaser's pulsed cleaners are a separate product line — this listing is CW only.\u003c\/p\u003e\n\n\u003ch3\u003eAir-Cooled Design Rated for 8+ Hours of Continuous Duty\u003c\/h3\u003e\n\u003cp\u003eHerolaser rates this machine's industrial air-cooling system to hold internal operating temperature under \u003cstrong\u003e104°F (40°C)\u003c\/strong\u003e even after 8+ hours of continuous operation. Many high-power laser cleaners in this wattage class rely on external water chillers to manage heat — which means extra plumbing, coolant maintenance, and a second piece of equipment to haul between job sites. An air-cooled system that holds its temperature through a full shift removes that dependency: the machine is genuinely a plug-in-and-run tool rather than a chiller-tethered station. The tradeoff worth knowing is that air cooling is generally less aggressive than water cooling at the very top of the CW wattage range, which is part of why 2000W is Herolaser's air-cooled ceiling in this handheld line.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/cleaner5.jpg?v=1787800558\" alt=\"Herolaser 2000W Continuous Laser Cleaning Machine air-cooled control panel and main unit\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e16.4 ft Heavy-Duty Cord for Working Room Without an Extension Cord\u003c\/h3\u003e\n\u003cp\u003eThe unit ships with a \u003cstrong\u003e16.4 ft (5 m)\u003c\/strong\u003e heavy-duty cord connecting the handheld cleaning head to the main unit. That's enough reach to work around a full vehicle panel, a structural beam, or a large fabricated part without repositioning the base unit for every pass. Herolaser specifically advises against extension cords with this machine — running the laser head through an extension can introduce voltage drop and cable resistance that degrade beam consistency and put unnecessary load on the system, so the working radius is set by the stock cord length, not stretched further.\u003c\/p\u003e\n\n\u003ch3\u003eNon-Contact, Non-Abrasive Cleaning That Protects the Base Material\u003c\/h3\u003e\n\u003cp\u003eBecause the laser beam never physically touches the surface, there's no grinding wheel, no blasting media, and no bristle brush wearing away good base metal along with the rust or coating. Abrasive methods remove a thin layer of the substrate itself every time they're used, which is why repeated grinding or sandblasting on the same part gradually thins it. Laser ablation is tuned to selectively vaporize contamination — rust, paint, oxide layers, oil film — while leaving properly cleaned base metal intact underneath, which matters most on parts where dimensional tolerance or long-term structural integrity can't afford repeated material loss, such as molds, precision tooling, or load-bearing steel.\u003c\/p\u003e\n\n\u003ch3\u003eNo Media, Dust, or Chemical Waste Stream to Manage\u003c\/h3\u003e\n\u003cp\u003eSandblasting generates spent media and airborne dust that need containment and disposal; chemical stripping generates solvent waste that requires proper handling and disposal under most shop safety programs. Laser cleaning ablates contamination into fine particulate and vapor that's captured by a fume extraction setup rather than accumulating as a physical waste stream on the shop floor. For shops cleaning frequently, that removes a recurring consumables cost (media, solvents) and a recurring disposal step — the laser itself is the only \"consumable\" being spent, in the form of very gradual optical component wear over the life of the machine.\u003c\/p\u003e\n\n\u003ch3\u003eHandheld, Portable Form Factor for In-Place Cleaning\u003c\/h3\u003e\n\u003cp\u003eThe cleaning head is designed to be walked directly to the work — a vehicle frame on a lift, a fixed structural weldment, a large fabricated assembly — rather than requiring the part to be removed and brought to a fixed-bed machine. That portability is the core advantage handheld laser cleaners have over enclosed or gantry-style laser cleaning systems: for parts that are large, awkwardly shaped, or simply inconvenient to move, in-place cleaning eliminates the disassembly and re-fixturing step entirely.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/cleaner6_bb4f3ee5-4415-4eb2-b481-ac89112837df.jpg?v=1787800567\" alt=\"Herolaser 2000W Continuous Laser Cleaning Machine handheld cleaning head detail for portable rust removal\" style=\"width:100%;height:auto;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHerolaser 2000W handheld fiber laser cleaning machine (main unit)\u003c\/li\u003e\n\u003cli\u003eHandheld laser cleaning head\u003c\/li\u003e\n\u003cli\u003eIntegrated control system\u003c\/li\u003e\n\u003cli\u003e16.4 ft (5 m) power and connection cable\u003c\/li\u003e\n\u003cli\u003eUser documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLaser Power: \u003cstrong\u003e2000W\u003c\/strong\u003e (continuous wave)\u003c\/li\u003e\n\u003cli\u003eLaser Type: Fiber, Continuous Wave (CW)\u003c\/li\u003e\n\u003cli\u003eCooling: Air-cooled, holds \u0026lt;104°F (40°C) after 8+ hours of continuous operation\u003c\/li\u003e\n\u003cli\u003eCable Length: 16.4 ft (5 m) heavy-duty cord (extension cords not recommended)\u003c\/li\u003e\n\u003cli\u003eOperation: Handheld, portable\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 months (1 Year)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThis machine carries a \u003cstrong\u003e1-Year manufacturer warranty\u003c\/strong\u003e as stated by Herolaser. Purchased through The Maker's Chest, it's backed by our standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eThe Maker's Chest Difference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e🛠️ Real setup support from a team that knows laser equipment, not a call center script\u003c\/li\u003e\n\u003cli\u003e🔧 U.S.-based support if you run into setup or operating questions\u003c\/li\u003e\n\u003cli\u003e↩️ TMC's standard 75-day return window — well beyond typical manufacturer-direct terms\u003c\/li\u003e\n\u003cli\u003e✅ Every unit is inspected before it ships, so the machine that arrives has already been verified to power on and run correctly\u003c\/li\u003e\n\u003cli\u003e⚖️ Pre-purchase guidance on whether the 1500W or 2000W tier actually matches your cleaning workload before you commit to the higher price point\u003c\/li\u003e\n\u003cli\u003e🧰 Warranty claims handled directly through TMC — you're not coordinating with an overseas manufacturer on your own if something needs service\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHerolaser 2000W vs. Herolaser 1500W — Choosing Your Tier\u003c\/h3\u003e\n\u003cp\u003eBoth machines share the same continuous-wave fiber platform, air-cooled design, and 16.4 ft cord — the meaningful difference is rated power output and price.\u003c\/p\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHerolaser 1500W\u003c\/th\u003e\n\u003cth\u003eHerolaser 2000W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated CW Power\u003c\/td\u003e\n\u003ctd\u003e1500W\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e2000W\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$6,799\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e$9,500\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Type\u003c\/td\u003e\n\u003ctd\u003eFiber, CW\u003c\/td\u003e\n\u003ctd\u003eFiber, CW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eAir-cooled, \u0026lt;104°F after 8+ hrs\u003c\/td\u003e\n\u003ctd\u003eAir-cooled, \u0026lt;104°F after 8+ hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Length\u003c\/td\u003e\n\u003ctd\u003e16.4 ft\u003c\/td\u003e\n\u003ctd\u003e16.4 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year\u003c\/td\u003e\n\u003ctd\u003e1 Year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eChoose the Herolaser 2000W if\u003c\/strong\u003e you're regularly cleaning heavier rust, thicker coatings, or larger surface areas and want more sustained power headroom for faster throughput on demanding jobs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Herolaser 1500W if\u003c\/strong\u003e your cleaning workload is lighter-duty or occasional and you'd rather save on the up-front price on the same core platform.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions about Herolaser 2000W Continuous Laser Cleaning Machine\u003c\/h2\u003e\n\n\u003cstrong\u003eQ: What's the actual difference between the 2000W and 1500W Herolaser cleaners?\u003c\/strong\u003e\u003cbr\u003eA: Primarily rated continuous-wave power output and price — 2000W vs. 1500W, at $9,500 vs. $6,799. Both share the same air-cooled platform and 16.4 ft cord. The 2000W gives you more sustained power for faster cleaning through heavier rust, thicker coatings, or larger jobs; the 1500W covers lighter-duty and occasional use at a lower price point.\n\u003chr\u003e\n\u003cstrong\u003eQ: Is this a pulsed or continuous-wave (CW) laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: Continuous wave (CW). It delivers a steady beam rather than short high-peak pulses, which favors faster material removal on heavier rust, paint, and coating jobs. Pulsed cleaners (a separate product line) favor lighter, more delicate work like mold cleaning. If you're not sure which type your job needs, CW is generally the better fit for higher-throughput industrial and fabrication cleaning.\n\u003chr\u003e\n\u003cstrong\u003eQ: What materials and surfaces can it clean?\u003c\/strong\u003e\u003cbr\u003eA: It's built for metal surfaces — removing rust, paint, oil film, and coatings from steel and other structural or fabricated metal. It is not a wood, plastic, or fabric cleaning tool.\n\u003chr\u003e\n\u003cstrong\u003eQ: Do I need certification or special training to operate it?\u003c\/strong\u003e\u003cbr\u003eA: No formal certification is required, but this is a Class 4 laser device by the nature of its power output, and proper laser safety training and PPE (laser safety eyewear rated for the unit's wavelength, protective clothing) are essential before operating it. Read Herolaser's safety documentation and follow standard laser safety protocols for your shop.\n\u003chr\u003e\n\u003cstrong\u003eQ: Is it safe to use in a home garage or small shop?\u003c\/strong\u003e\u003cbr\u003eA: It can be used in a home shop setting provided you follow proper laser safety practices — controlled access to the work area, correct-wavelength laser safety eyewear for anyone in the room, and adequate fume extraction for the ablated material. Because it's a Class 4 laser, treat the same safety precautions you would apply to any high-power industrial laser tool.\n\u003chr\u003e\n\u003cstrong\u003eQ: What power\/voltage or outlet does this machine need?\u003c\/strong\u003e\u003cbr\u003eA: Confirm electrical requirements with The Maker's Chest before purchase or installation, especially if you're planning shop wiring around it.\n\u003chr\u003e\n\u003cstrong\u003eQ: Is the warranty valid if I buy through The Maker's Chest instead of directly from Herolaser?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Herolaser's 1-year manufacturer warranty applies to units purchased through TMC the same as it would buying direct.\n\u003chr\u003e\n\u003cstrong\u003eQ: What's TMC's return policy on this machine?\u003c\/strong\u003e\u003cbr\u003eA: TMC's standard 75-day return window applies to this listing.\n\u003chr\u003e\n\u003cstrong\u003eQ: Why buy through The Maker's Chest instead of directly from the manufacturer?\u003c\/strong\u003e\u003cbr\u003eA: TMC handles logistics and setup questions in plain English with U.S.-based support, backs the purchase with a 75-day return window well beyond typical manufacturer-direct terms, and is available if you run into setup issues after the sale — rather than routing you through a manufacturer support queue.\n\u003chr\u003e\n\u003cstrong\u003eQ: Will laser cleaning damage or thin the base metal underneath rust or coating?\u003c\/strong\u003e\u003cbr\u003eA: Properly used, laser ablation is tuned to remove the contamination layer (rust, paint, oxide) while leaving the base metal intact, unlike grinding or sandblasting, which physically removes a thin layer of the substrate itself with every pass. This is part of why laser cleaning is preferred for parts where dimensional tolerance or long-term material integrity matters.\n\u003chr\u003e\n\u003cstrong\u003eQ: How is this different from sandblasting or media blasting?\u003c\/strong\u003e\u003cbr\u003eA: No blasting media, no dust cloud, and no consumables to buy and dispose of — the laser itself does the work, and ablated material is captured by fume extraction rather than becoming a physical waste stream. It also won't remove base material the way abrasive blasting does over repeated passes.\n\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHerolaser 2000W Continuous Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eLaser Power: \u003cstrong\u003e2000W\u003c\/strong\u003e (continuous wave)\u003c\/li\u003e\n\u003cli\u003eLaser Type: Fiber, Continuous Wave (CW)\u003c\/li\u003e\n\u003cli\u003eCooling: Air-cooled, holds \u0026lt;104°F (40°C) after 8+ hours of continuous operation\u003c\/li\u003e\n\u003cli\u003eCable Length: 16.4 ft (5 m) heavy-duty cord (extension cords not recommended)\u003c\/li\u003e\n\u003cli\u003eOperation: Handheld, portable\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 months (1 Year)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eHerolaser backs this machine with a \u003cstrong\u003e1-Year manufacturer warranty\u003c\/strong\u003e. Purchases through The Maker's Chest are covered by TMC's standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Herolaser","offers":[{"title":"Default Title","offer_id":57194447306918,"sku":"ML-QF-FL-SC-HW2000","price":9500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/DSC_33874.png?v=1787800561"},{"product_id":"herolaser-200w-pulsed-laser-cleaner","title":"Herolaser 200W Pulsed Laser Cleaner","description":"\u003ch2\u003eThe Herolaser 200W Pulsed Laser Cleaner Doubles Down on Power Without Adding a Single Gram\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eAt \u003cstrong\u003e200W\u003c\/strong\u003e of pulsed fiber output, this backpack-style cleaner strips heavier rust, mill scale, and multi-layer coatings faster than the 100W tier — while staying at the same \u003cstrong\u003e0.78 kg\u003c\/strong\u003e handheld weight.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003eRust, old paint, and baked-on coatings don't come off metal without a fight. Sandblasting eats substrate, chemical strippers create hazardous waste, and wire wheels chew through thin gauge material. A pulsed fiber laser cleaner sidesteps all three problems by vaporizing contaminants with short, high-energy light pulses instead of abrasion or chemistry — and it does it without ever touching the surface it's cleaning.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHerolaser 200W Pulsed Laser Cleaner\u003c\/strong\u003e (model \u003cstrong\u003eML-QF-SS-SC-HW\u003c\/strong\u003e) is the higher-power tier of Herolaser's two-model pulsed cleaning lineup, built for shops that need to clear heavier corrosion and thicker coatings than a 100W unit can move through quickly, without stepping up to a bulkier continuous-wave system.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/4_53c9a360-84af-4837-b5d6-13ed3ecc49bd.png?v=1787800563\" alt=\"Herolaser 200W Pulsed Laser Cleaner removing rust and coatings from metal with handheld pulsed fiber laser\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e200W of Pulsed Output for Heavier Contamination\u003c\/h3\u003e\n\u003cp\u003ePulsed lasers clean by firing extremely short bursts of high peak-power light that vaporize surface contaminants in the instant before heat can conduct into the base metal. Doubling the average power from 100W to \u003cstrong\u003e200W\u003c\/strong\u003e means each pass delivers more energy to the surface, which translates directly into fewer passes needed to clear thick rust scale, multi-coat paint jobs, or heavier mill scale than the 100W Herolaser tier can manage in the same time. A shop stripping structural steel or reclaiming heavily corroded tooling gets through the job faster at 200W than at 100W, which is the entire reason this tier exists as a separate SKU rather than a firmware setting.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/7_86b4a8c7-e9cf-42ca-b763-9b4c0ff5ccfe.png?v=1787800554\" alt=\"Herolaser 200W Pulsed Laser Cleaner before and after rust paint and coating removal results\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eNon-Abrasive, Chemical-Free Cleaning That Preserves the Substrate\u003c\/h3\u003e\n\u003cp\u003eBecause the laser ablates contamination rather than grinding or blasting it away, there's no media to buy, no dust cloud to contain, and no acid runoff to dispose of — a meaningful difference from sandblasting or chemical stripping, both of which require PPE, containment, and waste handling that add real cost and downtime to a cleaning job. The base metal underneath rust or paint has a different vaporization threshold than the contaminant sitting on top of it, so a correctly tuned pulsed beam removes the coating and stops, rather than continuing to erode the parent material the way abrasive media does. That's what makes laser cleaning viable on precision tooling, thin sheet metal, and restoration work where losing even a fraction of a millimeter of base material matters.\u003c\/p\u003e\n\u003ch3\u003eSelf-Developed Control System for Selective Removal\u003c\/h3\u003e\n\u003cp\u003eThe unit runs on Herolaser's \u003cstrong\u003eself-developed control system\u003c\/strong\u003e, which governs pulse parameters so the machine can selectively remove contaminants — rust, oil film, old paint — while preserving the integrity of the surface underneath rather than blasting indiscriminately at a fixed setting. This matters most on parts where over-cleaning is as costly as under-cleaning: a mold cavity, a weld-prep surface, or a part going back into service where dimensional accuracy can't drift. A crude on\/off blaster can't make that distinction; a controlled pulsed system can.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/3_4a50c649-1894-4595-947e-a4fd82eeac2d.png?v=1787800555\" alt=\"Herolaser 200W Pulsed Laser Cleaner control panel for adjustable pulse settings and selective laser cleaning\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBackpack-Style Portability at 0.78 kg\u003c\/h3\u003e\n\u003cp\u003eThe handheld cleaning head weighs just \u003cstrong\u003e0.78 kg\u003c\/strong\u003e — the same weight as the 100W tier, since the added power comes from the laser source, not the gun — and the backpack-style carry system keeps that weight off the operator's wrist during extended cleaning runs. Compare that to a stationary or cart-mounted cleaning rig that has to be wheeled to the job: the Herolaser 200W goes into tanks, under equipment, and into tight fabrication bays that a fixed-position cleaner simply can't reach. For shops doing on-site rust removal on structural steel, machinery, or vehicles rather than bringing parts to a bench, that portability is the difference between a same-day job and a logistics problem.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/8_070a334d-c206-4dd2-882c-8bf65b86e5d9.png?v=1787800563\" alt=\"Herolaser 200W Pulsed Laser Cleaner backpack-style portable laser cleaning system for field work\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e9-Language Control Panel for Mixed-Crew Shop Floors\u003c\/h3\u003e\n\u003cp\u003eThe onboard control panel supports \u003cstrong\u003e9 languages\u003c\/strong\u003e, letting operators adjust cleaning parameters — pulse settings, cleaning mode — in their own language rather than translating a single-language interface on the fly. For shops running multilingual crews or training new operators, that removes a real source of setup error: a misread parameter on a laser cleaner isn't a cosmetic mistake, it's the difference between clearing a coating cleanly and marking the substrate.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Sustained Industrial Duty\u003c\/h3\u003e\n\u003cp\u003eHerolaser states the unit undergoes rigorous quality checks for long-term performance and is backed by after-sales support, positioning it for repeated industrial use rather than occasional hobby cleanup. A cleaner that's only rated for light, intermittent use will show performance drift or component wear under the kind of daily, multi-hour duty cycle a fabrication shop or restoration business puts it through — this is the tier built to take that load at the higher 200W output.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHerolaser 200W Pulsed Laser Cleaner (handheld cleaning gun)\u003c\/li\u003e\n\u003cli\u003eBackpack-style laser source\/power unit\u003c\/li\u003e\n\u003cli\u003eControl panel \/ interface unit\u003c\/li\u003e\n\u003cli\u003ePower and connection cabling\u003c\/li\u003e\n\u003cli\u003eSafety glasses (laser-rated)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-QF-SS-SC-HW (200W tier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 200W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.78 kg (handheld unit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Backpack-style, portable\/handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Panel:\u003c\/strong\u003e 9-language interface, self-developed control system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Rust, paint, oil, and coating removal from metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year. \u003cstrong\u003eReturns:\u003c\/strong\u003e Eligible under The Maker's Chest's standard 75-day return window.\u003c\/p\u003e\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🛠️ Pre-purchase and setup support from a team that knows laser cleaning equipment\u003c\/li\u003e\n\u003cli\u003e🔧 1-year warranty coverage backing every Herolaser unit sold through TMC, with claims handled directly by our team\u003c\/li\u003e\n\u003cli\u003e↩️ TMC's standard 75-day return window, longer than many direct-from-manufacturer policies\u003c\/li\u003e\n\u003cli\u003e✅ Every unit is inspected before it ships, so the cleaner that arrives has already been verified to power on and run correctly\u003c\/li\u003e\n\u003cli\u003e⚖️ Pre-purchase guidance on whether the 100W or 200W tier actually matches your typical cleaning workload before you commit to the higher price point\u003c\/li\u003e\n\u003cli\u003e💬 Straight answers on pulse settings, cleaning mode, and setup from a team that has actually run this equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHerolaser 200W vs. 100W Pulsed Laser Cleaner: Which Tier Fits Your Shop?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHerolaser 100W Pulsed Laser Cleaner\u003c\/th\u003e\n\u003cth\u003eHerolaser 200W Pulsed Laser Cleaner\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e100W pulsed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e200W pulsed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e$7,599\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e$9,600\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.78 kg\u003c\/td\u003e\n\u003ctd\u003e0.78 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eBackpack-style, handheld\u003c\/td\u003e\n\u003ctd\u003eBackpack-style, handheld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Panel\u003c\/td\u003e\n\u003ctd\u003e9-language interface\u003c\/td\u003e\n\u003ctd\u003e9-language interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eLighter rust\/coating removal, smaller parts, tighter budgets\u003c\/td\u003e\n\u003ctd\u003eHeavier corrosion, multi-layer coatings, faster throughput\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the 200W tier if\u003c\/strong\u003e you're regularly clearing heavy rust, mill scale, or multi-coat paint and need fewer passes to get there. \u003cstrong\u003eChoose the 100W tier if\u003c\/strong\u003e your work is lighter-duty cleaning or delicate parts and you want to save on the up-front price.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about Herolaser 200W Pulsed Laser Cleaner\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the actual difference between the 200W and 100W Herolaser pulsed cleaners?\u003c\/strong\u003e\u003cbr\u003eA: Laser output power. The 200W unit delivers double the average pulsed power of the 100W tier, which clears heavier rust, mill scale, and multi-layer coatings in fewer passes. Both share the same 0.78 kg handheld weight, backpack-style design, and 9-language control panel — the difference is entirely in cleaning speed on heavier contamination, not portability or interface.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What materials and contaminants can this machine clean?\u003c\/strong\u003e\u003cbr\u003eA: It's built for metal surfaces — removing rust, oil film, old paint, and coatings without damaging the base metal underneath, per Herolaser's stated use case for this model.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special certification or training to operate a laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: No certification is required to purchase, but laser cleaning equipment emits a Class 4 laser beam and requires proper laser safety glasses, training on safe operation, and awareness of reflective surfaces before use. Read the manufacturer's safety documentation fully before first use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this safe to use in a home shop or small business setting?\u003c\/strong\u003e\u003cbr\u003eA: It can be used in a shop setting with proper precautions — laser safety eyewear, a controlled work area free of unintended reflective surfaces, and adequate ventilation for vaporized contaminants. This is industrial-grade equipment, not a consumer tool, and should be treated with the same respect as any Class 4 laser device.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the power\/voltage requirements?\u003c\/strong\u003e\u003cbr\u003eA: \u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eAC 220-250V \/ 50 Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the warranty valid when I buy through The Maker's Chest instead of directly from Herolaser?\u003c\/strong\u003e\u003cbr\u003eA: Yes. TMC backs this unit with a 1-year warranty and TMC's own customer support for the life of that warranty.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's TMC's return policy on this machine?\u003c\/strong\u003e\u003cbr\u003eA: This product is eligible under TMC's standard 75-day return window from the date of delivery.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy through The Maker's Chest instead of directly from the manufacturer?\u003c\/strong\u003e\u003cbr\u003eA: TMC provides U.S.-based pre- and post-purchase support, a 75-day return window, and warranty backing on top of the manufacturer's own terms — plus guidance choosing between the 100W and 200W tiers based on your actual cleaning workload.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is a pulsed laser cleaner different from a continuous-wave (CW) laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: Pulsed lasers fire short, high-peak-power bursts that vaporize surface contamination with minimal heat transfer into the base material, making them better suited to precision work and thinner materials. Continuous-wave cleaners run a constant beam and are generally better suited to high-speed, heavy industrial stripping where some additional heat input is acceptable. This 200W unit is a pulsed system — it is not directly comparable to Herolaser's continuous-wave 1500W\/2000W cleaners, which use different technology for different jobs.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHerolaser 200W Pulsed Laser Cleaner Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-QF-SS-SC-HW (200W tier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 200W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.78 kg (handheld unit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Backpack-style, portable\/handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Panel:\u003c\/strong\u003e 9-language interface, self-developed control system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Rust, paint, oil, and coating removal from metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eHerolaser 200W Pulsed Laser Cleaner is covered by a 1-year warranty. Returns are accepted within TMC's standard 75-day return window from delivery.\u003c\/p\u003e","brand":"Herolaser","offers":[{"title":"Default Title","offer_id":57194453893286,"sku":"ML-QF-SS-SC-HW-200W","price":9600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/1_e42ee623-c4f5-420e-957a-d4e8670fb766.png?v=1794507140"},{"product_id":"herolaser-100w-pulsed-laser-cleaner","title":"Herolaser 100W Pulsed Laser Cleaner","description":"\u003ch2\u003e100W of Pulsed Precision: Strip Rust, Paint, and Coatings Without Damaging the Metal Underneath\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe Herolaser 100W Portable Laser Cleaning Machine delivers a stable \u003cstrong\u003e100W pulsed fiber laser\u003c\/strong\u003e in a backpack-style unit that weighs just \u003cstrong\u003e0.78 kg\u003c\/strong\u003e at the handheld head — built for selective, non-contact cleaning that leaves base metal untouched.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003eWire wheels, grinders, and chemical strippers all share the same problem: they remove material indiscriminately, and it's easy to gouge a surface or leave behind residue that has to be dealt with separately. Rust, paint, and oil coatings sit on top of the base metal — but sanding and grinding don't know the difference between the two, so they take a layer of your part along with the contamination.\u003c\/p\u003e\n\u003cp\u003eThe Herolaser 100W Portable Laser Cleaning Machine is built to solve that specific problem. It uses \u003cstrong\u003epulsed fiber laser\u003c\/strong\u003e energy — delivered in short, high-peak-power bursts rather than a constant beam — to vaporize surface contamination while leaving the metal underneath structurally unaffected. It's a handheld, backpack-style system designed for shops and field crews that need selective, chemical-free, abrasive-free cleaning without setting up a full stationary cleaning line.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner3_191b0805-96c6-4f71-8efa-a9dee3224dd2.jpg?v=1787800584\" alt=\"Herolaser 100W Pulsed Laser Cleaner removing rust paint and coatings from metal with handheld pulsed fiber laser\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePulsed Fiber Laser Ablation, Not Abrasion\u003c\/h3\u003e\n\u003cp\u003eThe machine's \u003cstrong\u003e100W pulsed fiber laser\u003c\/strong\u003e works by delivering energy in rapid, high-peak-power pulses rather than a continuous beam. Each pulse heats and vaporizes a thin layer of surface contaminant — rust, paint, oil film, mill scale — almost instantly, before enough heat has time to conduct into the base metal. This is fundamentally different from mechanical methods like grinding or wire-wheeling, which remove material through direct physical contact and can't distinguish between the contaminant layer and the substrate beneath it. The practical consequence for a shop is that a technician can clean a rusted bracket, a delicate weld area, or a thin-gauge panel without the risk of gouging, warping, or thinning the part — something that's a constant risk with abrasive tools.\u003c\/p\u003e\n\u003ch3\u003eSelf-Developed Control System for Selective Cleaning\u003c\/h3\u003e\n\u003cp\u003eHerolaser pairs the 100W laser source with what the manufacturer describes as a \u003cstrong\u003eself-developed control system\u003c\/strong\u003e that governs how the laser interacts with the surface, allowing an operator to dial in cleaning parameters for the specific contaminant and substrate in front of them. Where a fixed-output tool applies the same intensity everywhere, a controllable pulsed system lets the operator back off intensity on thin or delicate stock and increase it on heavier, more stubborn buildup. The result is that the same machine can move from stripping paint off a thick steel gate to cleaning corrosion off a precision part without swapping equipment or media.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner2_0aecf9da-43e1-45ec-b065-27d15732b904.jpg?v=1787800584\" alt=\"Herolaser 100W Pulsed Laser Cleaner control panel and cleaning head for adjustable selective laser cleaning\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBackpack-Style Design at 0.78 kg for All-Day Handheld Use\u003c\/h3\u003e\n\u003cp\u003eThe handheld cleaning head weighs just \u003cstrong\u003e0.78 kg\u003c\/strong\u003e, and the system uses a backpack-style carry layout rather than a stationary cabinet or cart. Compare that to shop-floor abrasive blasting or grinding setups, which typically require the operator to move heavy tooling, hoses, or media hoppers around the workpiece — with a backpack-style laser cleaner, the power and control electronics stay on the operator's back while only the lightweight head moves across the surface. That matters most in field-service and on-site restoration work, where the alternative is dragging a full cleaning rig to a job site or, worse, removing a part and shipping it to a shop that has one.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner4.jpg?v=1787800585\" alt=\"Herolaser 100W Pulsed Laser Cleaner backpack-style portable laser cleaning system for field restoration and maintenance\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e9-Language Control Panel for Multi-Operator Shops\u003c\/h3\u003e\n\u003cp\u003eThe intuitive control panel supports \u003cstrong\u003e9 languages\u003c\/strong\u003e, letting operators adjust cleaning parameters directly at the machine rather than through a separate app or computer interface some competing systems require. For a shop with a multilingual crew, or a business that resells or exports the machine, a single-language control panel is a real limitation — it either forces every operator through a translation step or restricts the machine to operators fluent in whatever language the manufacturer shipped it in. A multi-language panel removes that friction and shortens the learning curve for new operators.\u003c\/p\u003e\n\u003ch3\u003eNon-Contact Cleaning With No Media, Chemicals, or Abrasives\u003c\/h3\u003e\n\u003cp\u003eBecause the laser cleans through vaporization rather than physical contact, there's no sandblasting media, no chemical stripper, and no wire wheel involved in the process. Traditional rust and coating removal methods generate dust, spent media, or hazardous chemical waste that has to be contained and disposed of — laser cleaning produces primarily vapor and particulate that can be managed with standard fume extraction, with no ongoing consumable cost for media or stripping chemicals. For a shop doing regular restoration or maintenance work, that eliminates a recurring line-item cost and a waste-disposal obligation that abrasive and chemical methods carry.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner0.jpg?v=1787800584\" alt=\"Herolaser 100W Pulsed Laser Cleaner handheld cleaning head for non-abrasive rust paint and coating removal\" style=\"width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBuilt for Repeat Industrial and Restoration Use\u003c\/h3\u003e\n\u003cp\u003eHerolaser states the machine is built to undergo rigorous quality checks for long-term performance and is backed by expert after-sales support. A cleaning tool that sees daily use in an industrial or restoration shop needs to hold up to repeated on\/off cycling and continuous operation in a way a hobbyist-grade tool isn't designed for — the durability testing and after-sales support commitment are what separate a shop-duty tool from a one-off consumer gadget that isn't built for that use pattern.\u003c\/p\u003e\n\u003ch3\u003eVersatile Across Metal Restoration, Maintenance, and Fabrication\u003c\/h3\u003e\n\u003cp\u003eThe 100W unit is suited to rust removal, paint and coating stripping, and oil\/grease film cleaning across a range of metal surfaces — from heavy-duty machinery components to more delicate parts. A single 100W pulsed system that handles both ends of that range means a shop doesn't need to stock separate tools for heavy-duty maintenance work versus precision or restoration work; the same machine, with its parameters adjusted, covers both without a change in equipment.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHerolaser 100W handheld pulsed laser cleaning head\u003c\/li\u003e\n\u003cli\u003eBackpack-style control\/power unit\u003c\/li\u003e\n\u003cli\u003ePower cable and connection cabling\u003c\/li\u003e\n\u003cli\u003eUser documentation \/ quick-start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-QF-SS-SC-HW 100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e HLAICL100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Backpack-style, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (handheld head):\u003c\/strong\u003e 0.78 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Panel:\u003c\/strong\u003e Multi-language digital interface, 9 languages supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e Herolaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Herolaser backs this machine with a \u003cstrong\u003e1-Year\u003c\/strong\u003e manufacturer warranty covering manufacturing defects in materials, craftsmanship, and functionality under normal use, per Herolaser's published warranty policy.\u003c\/p\u003e\n\u003ch3\u003eThe Maker's Chest Difference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e🛠️ Hands-on support from a team that actually runs these machines\u003c\/li\u003e\n\u003cli\u003e🔧 75-day return window for peace of mind\u003c\/li\u003e\n\u003cli\u003e💬 Real answers before and after you buy — no call-center runaround\u003c\/li\u003e\n\u003cli\u003e✅ Every unit is inspected before it ships, so the cleaner that arrives has already been verified to power on and run correctly\u003c\/li\u003e\n\u003cli\u003e🧰 Warranty claims handled directly through TMC — you're not coordinating with an overseas manufacturer on your own if something needs service\u003c\/li\u003e\n\u003cli\u003e⚖️ Pre-purchase guidance on whether the 100W or 200W tier actually matches your typical cleaning workload before you commit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHerolaser 100W vs. Herolaser 200W Pulsed Laser Cleaner\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHerolaser 100W Portable Laser Cleaning Machine\u003c\/th\u003e\n\u003cth\u003eHerolaser 200W Portable Laser Cleaning Machine\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Type\u003c\/td\u003e\n\u003ctd\u003ePulsed Fiber Laser\u003c\/td\u003e\n\u003ctd\u003ePulsed Fiber Laser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003ctd\u003e200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eBackpack-style, handheld\u003c\/td\u003e\n\u003ctd\u003eBackpack-style, handheld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrice\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e$7,599\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e$9,600\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the 100W\u003c\/strong\u003e if you want entry-level pricing into pulsed laser cleaning for lighter rust, paint, and coating jobs on thinner or more delicate stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the 200W\u003c\/strong\u003e if your work regularly involves heavier coatings or thicker material where higher available power reduces the number of passes needed.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about Herolaser 100W Portable Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Herolaser 100W and 200W pulsed laser cleaners?\u003c\/strong\u003e\u003cbr\u003eA: Both use the same pulsed fiber laser technology in the same backpack-style handheld design. The main confirmed difference is power output (100W vs. 200W) and price. Higher wattage generally means faster cleaning and more capacity for heavier coatings.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between pulsed and continuous-wave (CW) laser cleaning?\u003c\/strong\u003e\u003cbr\u003eA: Pulsed lasers, like this Herolaser 100W unit, deliver energy in short, high-peak-power bursts. That's generally better suited to delicate or precision cleaning because it minimizes the heat-affected zone on the base material. Continuous-wave (CW) lasers deliver constant power and are generally better suited to faster, heavier-duty rust and coating removal where speed matters more than heat sensitivity. The two are different technologies suited to different jobs — this listing is for the pulsed version.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What materials and surfaces can this laser cleaner work on?\u003c\/strong\u003e\u003cbr\u003eA: It's designed for cleaning rust, paint, oil, and coatings from metal surfaces, ranging from heavy-duty machinery components to more delicate parts, per the manufacturer's stated use cases.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special training or certification to operate this machine?\u003c\/strong\u003e\u003cbr\u003eA: The control panel is designed to be operator-friendly with adjustable parameters across 9 languages, but any handheld laser cleaning system involves laser safety practices (eye protection, controlled work area) that operators should be trained on before use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is a handheld laser cleaner safe to use in a home shop?\u003c\/strong\u003e\u003cbr\u003eA: Handheld laser cleaners require the same safety discipline as other industrial laser equipment: proper laser safety eyewear rated for the laser's wavelength, a controlled work area, and adherence to the manufacturer's operating instructions. This is an industrial-grade tool, and buyers should follow all manufacturer safety guidance before using it in any setting, including a home shop.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the power\/voltage requirements to run this machine?\u003c\/strong\u003e\u003cbr\u003eA: \u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eAC 220-250V \/ 50 Hz\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the warranty valid when I buy through The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The Maker's Chest sells authorized Herolaser inventory, and the manufacturer's \u003cstrong\u003e1-Year\u003c\/strong\u003e warranty against manufacturing defects applies to machines purchased through TMC.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is The Maker's Chest's return policy on this machine?\u003c\/strong\u003e\u003cbr\u003eA: The Maker's Chest offers a standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e on this machine.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy from The Maker's Chest instead of directly from the manufacturer?\u003c\/strong\u003e\u003cbr\u003eA: The Maker's Chest provides US-based order support, a 75-day return window, and hands-on guidance from a team that actually operates this equipment — rather than navigating an overseas manufacturer's direct sales and support process on your own.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHerolaser 100W Portable Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-QF-SS-SC-HW 100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e HLAICL100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed Fiber Laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Backpack-style, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (handheld head):\u003c\/strong\u003e 0.78 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Panel:\u003c\/strong\u003e Multi-language digital interface, 9 languages supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e Herolaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eHerolaser backs this machine with a \u003cstrong\u003e1-Year\u003c\/strong\u003e manufacturer warranty covering manufacturing defects in materials, craftsmanship, and functionality under normal use. The Maker's Chest offers a standard \u003cstrong\u003e75-day return window\u003c\/strong\u003e on this machine.\u003c\/p\u003e","brand":"Herolaser","offers":[{"title":"Default Title","offer_id":57194560454822,"sku":"HLAICL100W","price":7599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Removallasercleaner.jpg?v=1794708987"},{"product_id":"hanten-seagull2-300w-pulsed-laser-cleaning-machine","title":"HantenCNC SEAGULL2 300W Pulsed Laser Cleaning Machine","description":"\u003ch2\u003e300W Pulsed Laser Cleaning Machine That Removes Rust, Paint, and Oxide Without Abrasives or Chemicals\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe Hanten SEAGULL2 pairs a \u003cstrong\u003e300W JPT\u003c\/strong\u003e pulsed fiber laser with a ZBTK handheld gun, \u003cstrong\u003e12 built-in cleaning modes\u003c\/strong\u003e, and an air-cooled luggage-style cabinet measuring \u003cstrong\u003e560 × 240 × 485 mm\u003c\/strong\u003e — no water chiller required.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_q_-cYYGaFw\" title=\"Hanten SEAGULL2 300W Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eRust, old paint, oil film, and oxide scale are the jobs that wear out wire wheels, clog sandblasting rigs, and generate chemical waste. A pulsed fiber laser cleaner removes all of them with short bursts of light instead of abrasion or solvents, so there is \u003cstrong\u003eno media to buy\u003c\/strong\u003e, no dust cloud to contain, and no acid runoff to dispose of. The trade-off is that you need a machine with enough pulse energy to clear heavy contamination in a package that can actually get to the work.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHanten SEAGULL2 300W Pulsed Laser Cleaning Machine\u003c\/strong\u003e (model SEAGULL2-HTCM300) is built for that middle ground: workshops, restoration shops, and maintenance crews that need serious cleaning power in a case that wheels into a truck, a fabrication bay, or a job site. It uses a JPT pulsed laser source, a ZBTK handheld cleaning gun, and a cabinet with a 30° tilted touchscreen that faces the operator.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/200W-300WSEAGULL2-Laser-Rust-Cleaning-Machines-with-powerful-ZBTK-laser-cleaning-Gun-outdoor-mobility-flexible-design.webp?v=1794367917\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStrip Contamination Without Heat-Damaging the Part: A 300W JPT Source Fires Nanosecond Pulses\u003c\/h3\u003e\n\u003cp\u003eThe source is a JPT pulsed fiber laser with \u003cstrong\u003e300W\u003c\/strong\u003e average output at \u003cstrong\u003e1064 nm\u003c\/strong\u003e, adjustable from 0 to 100% power. It fires pulses between \u003cstrong\u003e13 and 500 ns\u003c\/strong\u003e wide at 1–3,000 kHz, so each burst delivers very high peak intensity that vaporizes rust, paint, or oil before heat has time to soak into the metal underneath. A continuous-wave laser of similar average power holds a steady beam on the surface and puts far more heat into the part, which is why pulsed systems are the usual choice for thin sheet, castings, tooling, and restoration work. In practice the substrate keeps its dimensions and finish while the contamination leaves the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-pulsed-laser-cleaner-non-damaging-rust-removal.webp?v=1794360111\" alt=\"Pulsed laser stripping rust without damaging the base metal — Hanten SEAGULL2 300W Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMatch Pulse Energy to the Coating: 2 mJ, 5 mJ, or 15 mJ\u003c\/h3\u003e\n\u003cp\u003eThe 300W SEAGULL2 is available in three maximum pulse-energy configurations: \u003cstrong\u003e2 mJ, 5 mJ, and 15 mJ\u003c\/strong\u003e. Pulse energy is how much light each burst carries, and at 300W average power it sets how often the laser can fire: a 5 mJ configuration works out to roughly 60,000 pulses per second, while a 2 mJ configuration fires about 150,000. Lower energy with higher repetition gives a gentler finish on light oxide, oil, and thin paint; higher energy per pulse clears thick rust and multi-layer coatings in fewer passes. Because pulse energy is built into the laser source rather than set in software, you choose it in the \u003cstrong\u003ePulse Energy selector\u003c\/strong\u003e when you order — all three are the same price, so pick the one that matches the coatings you clean most often.\u003c\/p\u003e\n\u003ch3\u003eAim Precisely and Switch Jobs Fast With Dual Red-Light Targeting and 12 Cleaning Modes\u003c\/h3\u003e\n\u003cp\u003eThe ZBTK handheld gun projects \u003cstrong\u003etwo red positioning beams\u003c\/strong\u003e that intersect on the surface, so the operator sees exactly where the laser will land before cleaning starts. That cuts the overlap and missed strips you get when aiming by eye, which matters most on large panels where every redundant pass costs time. \u003cstrong\u003eTwelve built-in cleaning modes\u003c\/strong\u003e cover flat plate, painted pipe, and irregular parts, so switching from a rusty steel plate to a contoured casting is a menu selection instead of a parameter hunt.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-zbtk-gun-dual-red-light-positioning.webp?v=1794360111\" alt=\"Dual red-light positioning beams marking the cleaning area — Hanten SEAGULL2 300W ZBTK gun\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-zbtk-gun-12-cleaning-modes.webp?v=1794360110\" alt=\"ZBTK cleaning gun screen showing its 12 built-in cleaning modes — Hanten SEAGULL2 300W\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCover Broad Panels or Tight Weld Seams by Changing the Scan Width From 80 to 160 mm\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL2 is specified with four field-lens configurations: \u003cstrong\u003eF160 (80 × 80 mm), F210 (110 × 110 mm), F254 (130 × 130 mm), and F300 (160 × 160 mm)\u003c\/strong\u003e. The beam scans at up to about 30 m\/s, so a wider field covers flat panels and large surfaces in fewer strokes, while the narrow F160 field concentrates the same energy into a smaller area for stubborn spots and detail work. The practical effect is that one machine can handle broad rust removal on a frame and precision cleaning on a weld seam just by changing the field size.\u003c\/p\u003e\n\u003ch3\u003eRoll It Between Bays and Job Sites With No Chiller to Haul Along\u003c\/h3\u003e\n\u003cp\u003eThere is no chiller, water line, or coolant to maintain: the cabinet is \u003cstrong\u003eair-cooled\u003c\/strong\u003e and measures \u003cstrong\u003e560 × 240 × 485 mm\u003c\/strong\u003e. It is built like rolling luggage, with a pull handle, two sets of omnidirectional wheels that lock with brakes, and a 30° tilted control screen at the front of the cabinet. Water-cooled cleaners need a separate chiller that has to be filled, protected from freezing, and moved with the machine, so an air-cooled cabinet is simpler to take from bay to bay and to load into a vehicle. The braked wheels keep the machine planted once it is positioned, which matters on sloped driveways and shop floors.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-portable-outdoor-mobility.webp?v=1794360111\" alt=\"Wheeled luggage-style cabinet for outdoor and job-site use — Hanten SEAGULL2 300W Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eDual Airflow Modes Protect the Lens and Keep the Cleaned Surface Clear\u003c\/h3\u003e\n\u003cp\u003eThe ZBTK gun has two built-in airflow modes: a \u003cstrong\u003eside-blowing cover plate\u003c\/strong\u003e that sends a steady stream across the work to carry away dust and debris, and a \u003cstrong\u003educk-bill nozzle\u003c\/strong\u003e whose flat, wide outlet covers larger cleaning areas. Debris that settles back onto a freshly cleaned surface forces rework, and spatter that reaches the protective lens shortens its life, so directing airflow is part of the cleaning process, not an extra. Used with clean, dry compressed air, the nozzles keep the optics clear and the surface ready for coating or welding.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-zbtk-gun-dual-airflow-modes.webp?v=1794360111\" alt=\"Side-blowing cover plate and duck-bill nozzle airflow modes — Hanten SEAGULL2 300W ZBTK gun\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCatch Faults Early, Run It in Your Crew's Language, and Leave Room to Automate Later\u003c\/h3\u003e\n\u003cp\u003eThe gun monitors itself through \u003cstrong\u003e10 built-in safety alarm protections\u003c\/strong\u003e, so a fault is flagged at the machine before it turns into a damaged lens or a ruined part. It also supports \u003cstrong\u003eIO and Modbus\u003c\/strong\u003e interfaces, which means the cleaning head can later be tied into a fixture, conveyor, or robot cell instead of being replaced when the work outgrows handheld cleaning. The interface runs in more than 15 languages, including English, Spanish, German, and French, which helps shops with mixed-language crews get everyone running the same settings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-zbtk-gun-10-safety-alarms.webp?v=1794360110\" alt=\"ZBTK cleaning gun with 10 built-in safety alarm protections — Hanten SEAGULL2 300W\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat You Need to Run It: 220V Power, Clean Compressed Air, and Fume Extraction\u003c\/h3\u003e\n\u003cp\u003eThe 300W model runs on a \u003cstrong\u003esingle-phase 220V (±10%), 50\/60Hz\u003c\/strong\u003e supply, so a standard 120V outlet will not power it. Hanten recommends an \u003cstrong\u003eair compressor paired with an oil-water separator\u003c\/strong\u003e for high-power, heavy-dust, or continuous work, because dry, oil-free air blown across the protective lens means fewer lens replacements and less downtime. Cleaning vaporizes rust, paint, and coatings into fumes and fine particles, so a smoke purifier or fume extractor is the sensible companion; The Maker's Chest carries fume extraction systems that can be matched to the workload.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull2-300w-optional-accessories.webp?v=1794360110\" alt=\"Optional air compressor, smoke purifier, protective kit and tool kit — Hanten SEAGULL2 300W accessories\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHanten SEAGULL2 300W pulsed laser cleaning cabinet (JPT pulsed fiber laser source, in the pulse-energy configuration you select)\u003c\/li\u003e\n\u003cli\u003eZBTK handheld laser cleaning gun with dual red-light positioning\u003c\/li\u003e\n\u003cli\u003e5 m fiber cable\u003c\/li\u003e\n\u003cli\u003eSide-blowing cover plate and duck-bill nozzle for the two airflow modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot included: air compressor with oil-water separator, smoke purifier, protective kit (apron, gloves, shoe covers), and maintenance tool kit are optional accessories sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SEAGULL2-HTCM300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser (JPT source)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 300W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1064 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pulse Energy:\u003c\/strong\u003e 2 mJ \/ 5 mJ \/ 15 mJ (select one; same price)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 13–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Frequency Range:\u003c\/strong\u003e 1–3,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Regulation Range:\u003c\/strong\u003e 0–100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanning Frequency:\u003c\/strong\u003e 1–4,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Scan Speed:\u003c\/strong\u003e About 30 m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Width:\u003c\/strong\u003e F160 \/ 80 × 80 mm; F210 \/ 110 × 110 mm; F254 \/ 130 × 130 mm; F300 \/ 160 × 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncident Beam Diameter:\u003c\/strong\u003e ≤10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling System:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e Single phase 220V ±10%, 50\/60Hz AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0–40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -10 to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Dimensions:\u003c\/strong\u003e 560 × 240 × 485 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Gun:\u003c\/strong\u003e ZBTK handheld gun, 12 built-in cleaning modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Mode:\u003c\/strong\u003e Handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e IO and Modbus communication; 15+ languages\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10 built-in safety alarms; dual red-light positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE and FDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year on the whole machine and 2 Years on the laser source, with lifetime after-sales support from Hanten. Backed by \u003cstrong\u003e75-day returns\u003c\/strong\u003e through The Maker's Chest.\u003c\/p\u003e\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e📦 \u003cstrong\u003e75-day returns\u003c\/strong\u003e through The Maker's Chest: return the machine unused and in its original packaging within 75 days of delivery (return shipping paid by the customer)\u003c\/li\u003e\n\u003cli\u003e🇺🇸 A U.S.-based support team for questions before and after the sale, alongside Hanten's lifetime remote after-sales support\u003c\/li\u003e\n\u003cli\u003e🎯 Help choosing between the 2 mJ, 5 mJ, and 15 mJ builds — same price for all three, so the decision is purely about the rust, paint, and coatings you clean\u003c\/li\u003e\n\u003cli\u003e⚖️ An honest tier recommendation between this 300W SEAGULL2 and the 500W SEAGULL3, based on your surface area, coating thickness, and power supply\u003c\/li\u003e\n\u003cli\u003e⚡ A pre-delivery check on the single-phase 220V circuit this machine requires, so it runs the day it arrives\u003c\/li\u003e\n\u003cli\u003e💨 Fume extraction and compressed-air pairing from one retailer, since The Maker's Chest also stocks extraction systems for laser work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHanten SEAGULL2 300W vs. SEAGULL3 500W: Which Pulsed Laser Cleaner Fits Your Shop?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHanten SEAGULL2 300W\u003c\/th\u003e\n\u003cth\u003eHanten SEAGULL3 500W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e300W pulsed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500W pulsed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse Energy Options\u003c\/td\u003e\n\u003ctd\u003e2 \/ 5 \/ 15 mJ\u003c\/td\u003e\n\u003ctd\u003e1.5 \/ 5 \/ 15 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse Width\u003c\/td\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003ctd\u003e30–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLargest Scan Width\u003c\/td\u003e\n\u003ctd\u003e160 × 160 mm (F300)\u003c\/td\u003e\n\u003ctd\u003e185 × 185 mm (F330)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Modes\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003eSingle phase 220V\u003c\/td\u003e\n\u003ctd\u003e110V or 220V, no transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eAir-cooled\u003c\/td\u003e\n\u003ctd\u003eAir-cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Dimensions\u003c\/td\u003e\n\u003ctd\u003e560 × 240 × 485 mm\u003c\/td\u003e\n\u003ctd\u003e595 × 248 × 548 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eWorkshop rust, paint, and oxide removal; restoration and maintenance\u003c\/td\u003e\n\u003ctd\u003eHeavy rust and thick coatings; larger surfaces and higher throughput\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the SEAGULL2 300W if\u003c\/strong\u003e your work is workshop maintenance, restoration, or light-to-medium rust and paint removal, you have 220V power available, and you want the smaller cabinet at a lower investment. \u003cstrong\u003eChoose the SEAGULL3 500W if\u003c\/strong\u003e you regularly face heavy rust or thick coatings, need higher throughput on large surfaces, or need to run on 110V.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about the Hanten SEAGULL2 300W Pulsed Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between the Hanten SEAGULL2 300W and the SEAGULL3 500W?\u003c\/strong\u003e\u003cbr\u003eA: Power, coverage, and electrical flexibility. The 500W SEAGULL3 delivers more average power with 1.5 \/ 5 \/ 15 mJ pulse-energy options, a larger 185 × 185 mm maximum scan width, and universal 110V\/220V input. The 300W SEAGULL2 has a smaller cabinet, a lower price, and runs on single-phase 220V. Both are air-cooled pulsed systems with JPT laser sources.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can a 300W pulsed laser cleaner remove?\u003c\/strong\u003e\u003cbr\u003eA: Hanten positions the SEAGULL2 for rust, oil, paint, coatings, oxide layers, and graffiti, including in hard-to-reach areas. Its pulsed beam is designed to clean metal, and Hanten also shows it on wood and stone surfaces, where the low heat input helps avoid damaging the substrate.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will a pulsed laser cleaner damage the metal underneath?\u003c\/strong\u003e\u003cbr\u003eA: It is designed not to. Pulsed lasers deliver very short, high-energy bursts, so contamination vaporizes before heat accumulates in the base material, which avoids the thermal deformation you can get from a continuous beam. Correct settings still matter: start with lower energy and fewer passes on thin or delicate parts and increase only as needed.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special training or certification to operate it?\u003c\/strong\u003e\u003cbr\u003eA: No certification is required to buy it, but this is industrial laser equipment. It needs laser-rated safety eyewear, a controlled work area, awareness of reflective surfaces, and proper fume handling. Read the manufacturer's safety documentation before first use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What power and cooling does the SEAGULL2 300W require?\u003c\/strong\u003e\u003cbr\u003eA: It needs a single-phase 220V (±10%), 50\/60Hz AC supply; a standard 120V household outlet will not run it, so plan for a 220V circuit before it ships. Cooling is built in: the SEAGULL2 is air-cooled, so there is no water chiller, coolant, or freeze protection to manage.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need an air compressor and a fume extractor?\u003c\/strong\u003e\u003cbr\u003eA: Hanten recommends an air compressor with an oil-water separator for high-power, heavy-dust, or continuous use to protect the lens, and a smoke purifier to remove dust and fumes from the work area. Both are optional accessories sold separately; cleaning produces fumes and fine particles, so extraction is strongly recommended for indoor work.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which pulse energy should I choose: 2 mJ, 5 mJ, or 15 mJ?\u003c\/strong\u003e\u003cbr\u003eA: All three are the same price, so choose by workload. 5 mJ is the best all-around pick for everyday rust and paint removal on metal; 2 mJ gives the gentlest finish on light oxide, oil, thin paint, and delicate surfaces; and 15 mJ hits hardest for thick rust, heavy scale, and multi-layer coatings. If you're unsure, The Maker's Chest can help you decide before you order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does pulsed laser cleaning compare with sandblasting?\u003c\/strong\u003e\u003cbr\u003eA: Laser cleaning uses no abrasive media, chemicals, or consumables and does not erode the base metal the way blasting can, so there is no media cost, dust containment, or waste disposal. Sandblasting can still be faster on very large, heavily corroded surfaces, which is where the higher-power 500W tier is the better comparison.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can I mount the cleaning head on a robot or fixture later?\u003c\/strong\u003e\u003cbr\u003eA: The ZBTK gun supports IO and Modbus communication, which are the standard interfaces for connecting to automation equipment. That gives you a path to fixture-mounted or robotic cleaning without replacing the laser source.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What warranty, returns, and support come with the SEAGULL2 300W?\u003c\/strong\u003e\u003cbr\u003eA: Hanten provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source, plus lifetime after-sales support with English-language training videos and manuals and remote assistance by remote desktop, email, phone, and online chat. Through The Maker's Chest you also get 75-day returns: return the unit unused and in its original packaging within 75 days of delivery, with return shipping paid by the customer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy through The Maker's Chest instead of directly from Hanten?\u003c\/strong\u003e\u003cbr\u003eA: Hanten is a manufacturer based in Jinan, China. Buying through The Maker's Chest gives you 75-day returns, a U.S.-based team for questions on voltage, pulse energy, compressed air, and fume extraction, and the option to pair the machine with extraction equipment from one retailer.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHanten SEAGULL2 300W Pulsed Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SEAGULL2-HTCM300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser (JPT source)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 300W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1064 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pulse Energy:\u003c\/strong\u003e 2 mJ \/ 5 mJ \/ 15 mJ (select one; same price)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 13–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Frequency Range:\u003c\/strong\u003e 1–3,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Regulation Range:\u003c\/strong\u003e 0–100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanning Frequency:\u003c\/strong\u003e 1–4,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Scan Speed:\u003c\/strong\u003e About 30 m\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Width:\u003c\/strong\u003e F160 \/ 80 × 80 mm; F210 \/ 110 × 110 mm; F254 \/ 130 × 130 mm; F300 \/ 160 × 160 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncident Beam Diameter:\u003c\/strong\u003e ≤10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling System:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e Single phase 220V ±10%, 50\/60Hz AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0–40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -10 to 60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Dimensions:\u003c\/strong\u003e 560 × 240 × 485 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Gun:\u003c\/strong\u003e ZBTK handheld gun, 12 built-in cleaning modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Mode:\u003c\/strong\u003e Handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e IO and Modbus communication; 15+ languages\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10 built-in safety alarms; dual red-light positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE and FDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003ch6\u003eHanten SEAGULL2 300W Pulsed Laser Cleaning Machine Warranty Details:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eHanten SEAGULL2 300W comes with a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e on the whole machine and a \u003cstrong\u003e2-year warranty\u003c\/strong\u003e on the laser source, with lifetime after-sales support from Hanten.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Day Returns\u003c\/strong\u003e through The Maker's Chest: return your unit unused and in its original packaging \u003cstrong\u003ewithin 75 days\u003c\/strong\u003e of delivery (return shipping paid by the customer).\u003c\/li\u003e\n\u003cli\u003eDedicated, \u003cstrong\u003eU.S.-based support\u003c\/strong\u003e from The Maker's Chest for questions before and after the sale.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HantenCNC","offers":[{"title":"2 mJ","offer_id":57705633087654,"sku":"HANTEN-SEAGULL2-300W-2MJ","price":5930.0,"currency_code":"USD","in_stock":true},{"title":"5 mJ","offer_id":58132274905254,"sku":"HANTEN-SEAGULL2-300W-5MJ","price":5930.0,"currency_code":"USD","in_stock":true},{"title":"15 mJ","offer_id":58132274938022,"sku":"HANTEN-SEAGULL2-300W-15MJ","price":5930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/SEAGULL2_E2_84_A2-Laser-Rust-Cleaning-Machine-HANTENCNC-5.webp?v=1794465476"},{"product_id":"hanten-seagull3-500w-pulsed-laser-cleaning-machine","title":"HantenCNC SEAGULL3 500W Pulsed Laser Cleaning Machine","description":"\u003ch2\u003e500W Pulsed Laser Cleaning Machine Rated for Up to 15 m² per Hour on 20 µm Paint or Rust — Air-Cooled, No Chiller\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe Hanten SEAGULL3 delivers \u003cstrong\u003e500W\u003c\/strong\u003e of JPT pulsed output with \u003cstrong\u003e1.5 \/ 5 \/ 15 mJ\u003c\/strong\u003e pulse-energy options, universal \u003cstrong\u003e110V\/220V\u003c\/strong\u003e input, a \u003cstrong\u003e1.3 kg ZBTK handheld cleaning gun\u003c\/strong\u003e with 12 cleaning modes and 10 built-in safety alarms, and a \u003cstrong\u003e50 kg\u003c\/strong\u003e air-cooled cabinet on dual-swivel casters.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/MKlsSK6TT44\" title=\"HANTENCNC Seagull 3: 500W Pulsed Laser cleaning machine\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eHeavy rust, thick paint, and stubborn coatings are where lower-power laser cleaners run out of steam: the job takes many passes, the operator burns hours on square footage that should take minutes, and the temptation is to go back to sandblasting or chemical strippers. A 500W pulsed laser changes that math by \u003cstrong\u003eclearing more contamination per second\u003c\/strong\u003e while still delivering energy in short bursts that leave the substrate intact.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHanten SEAGULL3 500W Pulsed Laser Cleaning Machine\u003c\/strong\u003e (model HTCM500) is the high-output tier of Hanten's air-cooled handheld line, built for industrial maintenance, automotive parts, large-area rust removal, and shops with frequently changing cleaning requirements. It combines a JPT pulsed source, the \u003cstrong\u003eZBTK handheld laser cleaning gun\u003c\/strong\u003e, and a luggage-style rolling cabinet that plugs into either 110V or 220V power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/pulse-laser-rust-removal.webp?v=1794367949\" alt=\"Pulsed laser rust removal on a steel surface — Hanten SEAGULL3 500W Pulsed Laser Cleaning Machine\"\u003e\u003c\/p\u003e\n\u003ch3\u003eClear Heavy Rust and Paint at Up to 15 m² per Hour With 500W of JPT Pulsed Power\u003c\/h3\u003e\n\u003cp\u003eHanten rates the SEAGULL3 to clean up to \u003cstrong\u003e15 m² of 20 µm-thick paint or rust per hour\u003c\/strong\u003e, using a JPT pulsed fiber source at \u003cstrong\u003e1064 nm\u003c\/strong\u003e with 30–500 ns pulses and a 1–4,000 kHz repetition range. That throughput comes from higher average power: more energy reaches the surface every second, so each stroke strips more material than a 200W or 300W unit and heavy rust needs fewer passes. A fabrication shop or maintenance crew that cleans large panels, frames, or structural steel gets the job done in a fraction of the time, while the pulsed delivery keeps heat from accumulating in the base metal the way a continuous beam would.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-pulsed-laser-cleaning-before-after.webp?v=1794360110\" alt=\"Rusted and painted surfaces before and after pulsed laser cleaning — Hanten SEAGULL3 500W\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMatch Pulse Energy to the Coating: 1.5, 5, or 15 mJ\u003c\/h3\u003e\n\u003cp\u003eThe 500W SEAGULL3 is available in three maximum pulse-energy configurations: \u003cstrong\u003e1.5 mJ, 5 mJ, and 15 mJ\u003c\/strong\u003e. Pulse energy is how much light each burst carries, and at 500W average power it also sets the repetition rate: a 15 mJ configuration fires roughly 33,000 pulses per second, each hitting much harder than the many smaller pulses of a 1.5 mJ configuration. High energy per pulse breaks up heavy rust scale, thick paint, and bonded coatings quickly; lower energy suits oxide, oil, and delicate surfaces where a gentler finish matters. Fiber length follows the configuration — \u003cstrong\u003e5 m on the 1.5 mJ build and 10 m on the 5 mJ and 15 mJ builds\u003c\/strong\u003e — and you choose it in the \u003cstrong\u003ePulse Energy selector\u003c\/strong\u003e when you order. All three are the same price, so pick by the coatings you clean and how much reach you need.\u003c\/p\u003e\n\u003ch3\u003eWork All Day Without Fatigue: A 1.3 kg ZBTK Gun With Dual Red-Light Targeting\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eZBTK handheld cleaning gun weighs just 1.3 kg (1,300 g)\u003c\/strong\u003e, light enough for full shifts, overhead work, and awkward angles where a heavier head would wear out an operator's arm within the hour. Aiming is handled by \u003cstrong\u003edual red-light positioning\u003c\/strong\u003e: two red guide beams cross at the cleaning point, so the operator sees exactly where the laser will land and at what distance before firing. That removes the guesswork of holding a head at the right working distance by feel, which means fewer wasted passes, more even results across a panel, and less risk of over-cleaning the wrong spot on a finished part.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-laser-cleaning-gun.webp?v=1795070020\" alt=\"ZBTK handheld laser cleaning gun — Hanten SEAGULL3 500W Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSwitch Between 12 Cleaning Modes, With 10 Safety Alarms and IO\/Modbus Built In\u003c\/h3\u003e\n\u003cp\u003eThe ZBTK gun ships with \u003cstrong\u003e12 built-in cleaning modes\u003c\/strong\u003e, so the same tool can sweep rusted steel plate, follow the curve of a painted pipe, or work into an irregular casting without re-rigging. Behind those modes, the gun runs \u003cstrong\u003e10 built-in safety alarm protections\u003c\/strong\u003e that monitor the system and stop faults from turning into damaged optics or downtime. For shops planning to automate, the gun supports \u003cstrong\u003eIO and Modbus communication\u003c\/strong\u003e, which lets it be integrated with robotic arms, conveyors, or fixtures later rather than replaced. The interface is available in \u003cstrong\u003e15+ languages\u003c\/strong\u003e, including English, Spanish, French, German, and Portuguese, which matters on multilingual crews where every operator needs to read the same settings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-12-cleaning-modes.webp?v=1795070020\" alt=\"ZBTK cleaning gun interface with 12 built-in cleaning modes — Hanten SEAGULL3 500W\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCover Up to 200 × 130 mm per Stroke With Four Field-Lens Options\u003c\/h3\u003e\n\u003cp\u003eFour field-lens options set the scan field and working distance: \u003cstrong\u003eF160 (80 × 80 mm at 180 mm), F210 (130 × 90 mm at 240 mm), F254 (120 × 80 mm at 280 mm), and F300 (200 × 130 mm at 330 mm)\u003c\/strong\u003e. A wider field covers more surface per stroke on flat panels, frames, and structural steel, and the longer working distance of the F300 keeps the gun further from spatter. The compact F160 concentrates the same 500W into a smaller footprint for welds, recesses, and stubborn spots. Matching the field to the part is how you get both speed and control from one machine.\u003c\/p\u003e\n\u003ch3\u003eRun Long Shifts Without a Chiller: Air Cooling Tested for 24 Hours of Continuous Operation\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL3 uses an \u003cstrong\u003eair-cooling system\u003c\/strong\u003e with cabinet ventilation aligned to the laser's heat-dissipation requirements instead of a water chiller, and Hanten reports test data showing it can run continuously for \u003cstrong\u003e24 hours\u003c\/strong\u003e. Water-cooled units need a chiller that is bulky, has to be filled and protected from freezing, and adds another failure point; removing it keeps the machine compact and makes it practical for field work, vehicle transport, and sites without water access. For shops running long production shifts, sustained 500W output without a cooling loop to babysit is the difference between a tool you rely on and one you schedule around.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-efficient-air-cooling.webp?v=1794360110\" alt=\"Air-cooled cabinet ventilation with no water chiller — Hanten SEAGULL3 500W Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePlug Into 110V or 220V Power With No Transformer\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL3 accepts \u003cstrong\u003eAC 110V or 220V at 50\/60Hz\u003c\/strong\u003e directly, with no transformer required. That means it works on the 110V standard used across the United States and Canada as well as on 220V, so a shop is not forced to run a new 220V circuit just to start cleaning. Many high-power cleaners are limited to 220V, which turns an electrical upgrade into part of the purchase; here the supply requirement is one less thing to schedule before delivery, and the same machine can move between a 110V job site and a 220V shop.\u003c\/p\u003e\n\u003ch3\u003eRoll a 50 kg Cleaner Straight to the Job on Dual-Swivel Casters\u003c\/h3\u003e\n\u003cp\u003eThe cabinet weighs \u003cstrong\u003e50 kg\u003c\/strong\u003e and measures \u003cstrong\u003e595 × 248 × 548 mm\u003c\/strong\u003e, with a \u003cstrong\u003eluggage-style design, rotating handle, and four dual-swivel casters\u003c\/strong\u003e built for mobile work and vehicle transport. The dual-wheel casters damp vibration, shrink the turning radius for tight spaces, and carry the machine's weight over uneven or rough ground, so the unit can ride in a truck bed or van to a construction site or customer's workshop and be wheeled straight to the work. A cleaner that stays on a bench limits you to parts you can carry in; one that rolls to the job opens up on-site restoration and maintenance work.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-outdoor-mobility.webp?v=1795070021\" alt=\"Rolling the cabinet to an outdoor job site — Hanten SEAGULL3 500W ZBTK Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-double-swivel-casters.webp?v=1794360110\" alt=\"Double-swivel casters for moving the cabinet on site — Hanten SEAGULL3 500W Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eBuilt to Survive the Job Site: Reinforced Frame, IP68 Plugs, and a Protected 30° Screen\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL3 uses a \u003cstrong\u003eload-bearing frame structure\u003c\/strong\u003e designed to absorb heavy loads and vibration from transport and daily use, which is where lighter entry-level cabinets loosen and fail. Connections use \u003cstrong\u003eIP68 aviation plugs\u003c\/strong\u003e for secure, waterproof power delivery, and an \u003cstrong\u003ealuminum cable clamp\u003c\/strong\u003e keeps the fiber and cables from working loose over long-term use. The control screen sits at the front of the cabinet on a \u003cstrong\u003e30° tilt\u003c\/strong\u003e that matches the operator's natural sightline, behind a \u003cstrong\u003e3 mm acrylic panel\u003c\/strong\u003e that protects it in dusty, high-traffic environments. Inside, \u003cstrong\u003ehigh-damage-threshold galvanometer lenses and high-transmittance field lenses\u003c\/strong\u003e are chosen for long-term stability at high power.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-robust-frame.webp?v=1795070020\" alt=\"Load-bearing frame structure of the cabinet — Hanten SEAGULL3 500W Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-machine-details.webp?v=1795070020\" alt=\"Cabinet and ZBTK cleaning gun detail views — Hanten SEAGULL3 500W Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eKeep the Optics Clean and the Air Clear: Coaxial Ring Gas Nozzle, Compressed Air, and Fume Extraction\u003c\/h3\u003e\n\u003cp\u003eThe ZBTK gun comes standard with a \u003cstrong\u003ecoaxial ring gas nozzle\u003c\/strong\u003e that distributes gas evenly around the laser output aperture, concentric with the beam, creating a stable air curtain that keeps dust, debris, and back-splatter off the internal optics during high-power cleaning. An optional \u003cstrong\u003ebamboo joint tube\u003c\/strong\u003e can be bent and fixed to direct compressed air exactly where it is needed to blow loose rust and debris off the cleaned surface; it complements the ring nozzle rather than replacing it. Hanten recommends an \u003cstrong\u003eair compressor with an oil-water separator\u003c\/strong\u003e for high-power, heavy-dust, or continuous work, because dry, oil-free air means fewer protective-lens replacements and less downtime. At 500W the volume of vaporized rust and coating is substantial, so plan extraction from the start; The Maker's Chest carries fume extraction systems that can be sized to the job.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-optional-accessories.webp?v=1795070020\" alt=\"Optional air compressor, smoke purifier, and protective kit — Hanten SEAGULL3 500W accessories\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHanten SEAGULL3 500W pulsed laser cleaning cabinet (JPT pulsed fiber laser source, in the pulse-energy configuration you select)\u003c\/li\u003e\n\u003cli\u003eZBTK handheld pulsed laser cleaning gun with coaxial ring gas nozzle\u003c\/li\u003e\n\u003cli\u003eFiber cable (5 m on the 1.5 mJ configuration; 10 m on the 5 mJ and 15 mJ configurations)\u003c\/li\u003e\n\u003cli\u003eHanten's standard accessory set, shown below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull3-500w-zbtk-standard-accessories.webp?v=1795070020\" alt=\"Standard accessories included with the Hanten SEAGULL3 500W ZBTK pulsed laser cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003cp\u003eNot included: air compressor with oil-water separator, smoke purifier, protective kit (apron, gloves, shoe covers), and bamboo joint tube are optional accessories sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HTCM500 (SEAGULL3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser (JPT source)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Cleaning Gun:\u003c\/strong\u003e ZBTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1064 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pulse Energy:\u003c\/strong\u003e 1.5 mJ \/ 5 mJ \/ 15 mJ (select one; same price)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 30–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Frequency Range:\u003c\/strong\u003e 1–4,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m (1.5 mJ model); 10 m (5 mJ and 15 mJ models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Width (Working Distance):\u003c\/strong\u003e F160 \/ 80 × 80 mm (180 mm); F210 \/ 130 × 90 mm (240 mm); F254 \/ 120 × 80 mm (280 mm); F300 \/ 200 × 130 mm (330 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling System:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e AC 110V\/220V, 50\/60Hz, no transformer required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 5–40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Environment Humidity:\u003c\/strong\u003e ≤80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Dimensions:\u003c\/strong\u003e 595 × 248 × 548 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Gun Weight:\u003c\/strong\u003e 1.3 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Modes:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeting:\u003c\/strong\u003e Dual red-light positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10 built-in safety alarm protections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Interfaces:\u003c\/strong\u003e IO and Modbus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Languages:\u003c\/strong\u003e 15+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Mode:\u003c\/strong\u003e Pulsed, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Throughput:\u003c\/strong\u003e Up to 15 m² per hour of 20 µm paint or rust (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE and FDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year on the whole machine and 2 Years on the laser source, with lifetime after-sales support from Hanten. Backed by \u003cstrong\u003e75-day returns\u003c\/strong\u003e through The Maker's Chest.\u003c\/p\u003e\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e📦 \u003cstrong\u003e75-day returns\u003c\/strong\u003e through The Maker's Chest: return the machine unused and in its original packaging within 75 days of delivery (return shipping paid by the customer)\u003c\/li\u003e\n\u003cli\u003e🇺🇸 A U.S.-based support team for questions before and after the sale, alongside Hanten's lifetime remote after-sales support\u003c\/li\u003e\n\u003cli\u003e🎯 Help choosing between the 1.5 mJ, 5 mJ, and 15 mJ builds — same price for all three, including whether you need the 10 m fiber reach that comes with the higher-energy options\u003c\/li\u003e\n\u003cli\u003e⚖️ An honest tier recommendation between this 500W SEAGULL3 and the 300W SEAGULL2, based on your surface area, coating thickness, and budget\u003c\/li\u003e\n\u003cli\u003e⚡ Clear answers on running it from a standard 110V outlet or a 220V circuit, so it works wherever you plug it in\u003c\/li\u003e\n\u003cli\u003e💨 Fume extraction and compressed-air pairing from one retailer, since The Maker's Chest also stocks extraction systems for laser work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHanten SEAGULL3 500W vs. SEAGULL2 300W: Which Pulsed Laser Cleaner Fits Your Shop?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHanten SEAGULL2 300W\u003c\/th\u003e\n\u003cth\u003eHanten SEAGULL3 500W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e300W pulsed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e500W pulsed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse Energy Options\u003c\/td\u003e\n\u003ctd\u003e2 \/ 5 \/ 15 mJ\u003c\/td\u003e\n\u003ctd\u003e1.5 \/ 5 \/ 15 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse Width\u003c\/td\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003ctd\u003e30–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLargest Scan Width\u003c\/td\u003e\n\u003ctd\u003e160 × 160 mm (F300)\u003c\/td\u003e\n\u003ctd\u003e200 × 130 mm (F300)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003eSingle phase 220V\u003c\/td\u003e\n\u003ctd\u003e110V or 220V, no transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eAir-cooled\u003c\/td\u003e\n\u003ctd\u003eAir-cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Dimensions\u003c\/td\u003e\n\u003ctd\u003e560 × 240 × 485 mm\u003c\/td\u003e\n\u003ctd\u003e595 × 248 × 548 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eWorkshop rust, paint, and oxide removal; restoration and maintenance\u003c\/td\u003e\n\u003ctd\u003eHeavy rust and thick coatings; larger surfaces and higher throughput\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the SEAGULL3 500W if\u003c\/strong\u003e you regularly face heavy rust or thick coatings, clean large surfaces where throughput drives cost, or need to run on 110V power. \u003cstrong\u003eChoose the SEAGULL2 300W if\u003c\/strong\u003e your work is lighter maintenance or restoration, you have 220V available, and you want the smaller cabinet at a lower investment.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about the Hanten SEAGULL3 500W Pulsed Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between the Hanten SEAGULL3 500W and the SEAGULL2 300W?\u003c\/strong\u003e\u003cbr\u003eA: Power, throughput, and electrical flexibility. The SEAGULL3 delivers 500W of pulsed output, a rated throughput of up to 15 m² per hour on 20 µm paint or rust, a 200 × 130 mm maximum scan field, and universal 110V\/220V input. The SEAGULL2 300W has a smaller cabinet, a lower price, and requires single-phase 220V. Both are air-cooled pulsed systems with JPT laser sources.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How fast does a 500W pulsed laser cleaner remove rust and paint?\u003c\/strong\u003e\u003cbr\u003eA: Hanten rates the SEAGULL3 to clean up to 15 m² of 20 µm-thick paint or rust per hour. Actual speed depends on coating thickness, rust severity, substrate, pulse-energy configuration, and operator technique, so treat the figure as a best-case rating for thin coatings rather than a guarantee for heavy scale.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does it run on 110V, and does it need a water chiller?\u003c\/strong\u003e\u003cbr\u003eA: It runs on either. The SEAGULL3 accepts AC 110V or 220V at 50\/60Hz with no transformer required. It is also air-cooled, with Hanten test data showing 24 hours of continuous operation, so there is no chiller, coolant, or freeze protection to manage.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which pulse energy should I choose: 1.5 mJ, 5 mJ, or 15 mJ?\u003c\/strong\u003e\u003cbr\u003eA: All three are the same price, so choose by workload. 5 mJ is the best all-around pick for heavy rust and paint at production speed; 1.5 mJ gives the gentlest, finest finish on oxide, oil, and delicate surfaces; and 15 mJ delivers the most energy per pulse to break up thick scale and bonded coatings in fewer passes. The 5 mJ and 15 mJ builds also ship with a 10 m fiber cable instead of 5 m. If you're unsure, The Maker's Chest can help you decide before you order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is a pulsed laser cleaner different from a continuous-wave (CW) laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: Pulsed lasers fire short, high-peak-power bursts that vaporize contamination with minimal heat transfer into the base material, which makes them better for precision work, thin metal, and restoration. Continuous-wave cleaners run a constant beam and are generally used for high-speed stripping where more heat input is acceptable. The SEAGULL3 is a pulsed system.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What cleaning gun does the SEAGULL3 500W use, and how do I aim it?\u003c\/strong\u003e\u003cbr\u003eA: It uses the ZBTK handheld laser cleaning gun, which weighs 1.3 kg and has 12 built-in cleaning modes and 10 safety alarm protections. Aiming uses dual red-light positioning: two red guide beams intersect at the cleaning point, so you can see exactly where the laser will land and hold the correct working distance before firing.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the SEAGULL3 be integrated with automation equipment?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The ZBTK gun supports IO and Modbus communication interfaces, so it can be connected to robotic arms, conveyors, or fixtures if you move from handheld cleaning to an automated cell later.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can it clean materials other than metal?\u003c\/strong\u003e\u003cbr\u003eA: Hanten shows pulsed cleaning results on stone, painted wood, and graffiti as well as metal. Always test on a small, hidden area first and start with lower energy on delicate surfaces.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need an air compressor and a fume extractor?\u003c\/strong\u003e\u003cbr\u003eA: Hanten recommends an air compressor with an oil-water separator for high-power, heavy-dust, or continuous work to protect the lens, and a smoke purifier to remove dust and fumes. Both are optional accessories sold separately. At 500W the volume of vaporized rust and coating is high, so extraction is strongly recommended.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special training or certification to operate it?\u003c\/strong\u003e\u003cbr\u003eA: No certification is required to buy it, but this is industrial laser equipment. It requires laser-rated safety eyewear, a controlled work area, caution around reflective surfaces, and proper fume handling. Read the manufacturer's safety documentation before first use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What warranty, returns, and support come with the SEAGULL3 500W?\u003c\/strong\u003e\u003cbr\u003eA: Hanten provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source, plus lifetime after-sales support with English-language training videos and manuals and remote assistance by remote desktop, email, phone, and online chat. Through The Maker's Chest you also get 75-day returns: return the unit unused and in its original packaging within 75 days of delivery, with return shipping paid by the customer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy through The Maker's Chest instead of directly from Hanten?\u003c\/strong\u003e\u003cbr\u003eA: Hanten is a manufacturer based in Jinan, China. Buying through The Maker's Chest gives you 75-day returns, a U.S.-based team for questions on pulse-energy configuration, voltage, compressed air, and fume extraction, and the option to pair the machine with extraction equipment from one retailer.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHanten SEAGULL3 500W Pulsed Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HTCM500 (SEAGULL3)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser (JPT source)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Cleaning Gun:\u003c\/strong\u003e ZBTK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1064 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Pulse Energy:\u003c\/strong\u003e 1.5 mJ \/ 5 mJ \/ 15 mJ (select one; same price)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 30–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Frequency Range:\u003c\/strong\u003e 1–4,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m (1.5 mJ model); 10 m (5 mJ and 15 mJ models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Width (Working Distance):\u003c\/strong\u003e F160 \/ 80 × 80 mm (180 mm); F210 \/ 130 × 90 mm (240 mm); F254 \/ 120 × 80 mm (280 mm); F300 \/ 200 × 130 mm (330 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling System:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e AC 110V\/220V, 50\/60Hz, no transformer required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 5–40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Environment Humidity:\u003c\/strong\u003e ≤80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Dimensions:\u003c\/strong\u003e 595 × 248 × 548 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e 50 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Gun Weight:\u003c\/strong\u003e 1.3 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Modes:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeting:\u003c\/strong\u003e Dual red-light positioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e 10 built-in safety alarm protections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication Interfaces:\u003c\/strong\u003e IO and Modbus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Languages:\u003c\/strong\u003e 15+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Mode:\u003c\/strong\u003e Pulsed, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Throughput:\u003c\/strong\u003e Up to 15 m² per hour of 20 µm paint or rust (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE and FDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003ch6\u003eHanten SEAGULL3 500W Pulsed Laser Cleaning Machine Warranty Details:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eHanten SEAGULL3 500W comes with a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e on the whole machine and a \u003cstrong\u003e2-year warranty\u003c\/strong\u003e on the laser source, with lifetime after-sales support from Hanten.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Day Returns\u003c\/strong\u003e through The Maker's Chest: return your unit unused and in its original packaging \u003cstrong\u003ewithin 75 days\u003c\/strong\u003e of delivery (return shipping paid by the customer).\u003c\/li\u003e\n\u003cli\u003eDedicated, \u003cstrong\u003eU.S.-based support\u003c\/strong\u003e from The Maker's Chest for questions before and after the sale.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"HantenCNC","offers":[{"title":"1.5 mJ","offer_id":57705644523686,"sku":"HANTEN-SEAGULL3-500W-1.5MJ","price":12110.0,"currency_code":"USD","in_stock":true},{"title":"5 mJ","offer_id":58132275036326,"sku":"HANTEN-SEAGULL3-500W-5MJ","price":12110.0,"currency_code":"USD","in_stock":true},{"title":"15 mJ","offer_id":58132275069094,"sku":"HANTEN-SEAGULL3-500W-15MJ","price":12110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/SEAGULL3_E2_84_A2-500W-Air-cooled-Handheld-Laser-Rust-Removal-HANTENCNC-1.webp?v=1795104145"},{"product_id":"denaliweld-jet-2000-2000w-handheld-cw-laser-cleaning-machine","title":"DenaliWeld Jet 2000 CW 2000W Laser Cleaning Machine","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStrip Heavy Rust, Paint and Mill Scale Without Sandblasting Media, Chemicals or Cleanup\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe DenaliWeld Jet 2000 Laser Cleaning Machine uses a \u003cstrong\u003e2,000W continuous fiber laser\u003c\/strong\u003e scanning at up to \u003cstrong\u003e20,000 mm\/s\u003c\/strong\u003e, runs on \u003cstrong\u003e220V single-phase\u003c\/strong\u003e power, and needs \u003cstrong\u003eno water chiller\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003eSandblasting, wire wheels and chemical strippers all share the same hidden cost: the cleanup. Blast media has to be contained and swept up, grinding throws dust and removes base metal, and strippers leave hazardous waste to dispose of. A \u003cstrong\u003elaser cleaner\u003c\/strong\u003e removes the contaminant itself, vaporizing rust, paint and scale off the surface and leaving the substrate behind, with \u003cstrong\u003eno consumable media\u003c\/strong\u003e and nothing to collect except the fumes your extraction captures.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eJet 2000\u003c\/strong\u003e is DenaliWeld's high-power, cleaning-only configuration. Its \u003cstrong\u003e2,000W\u003c\/strong\u003e continuous source is built for throughput on heavy corrosion and thick coatings on steel, and its \u003cstrong\u003eair-cooled\u003c\/strong\u003e design runs on single-phase power without a chiller. DenaliWeld assembles it in Elgin, Illinois and backs it with a 3-year parts and labor warranty.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClear Large, Heavily Corroded Areas Faster\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/2kw-air-cooled-fiber-lasers_7b62a346-1b7d-415b-8089-63d9aac551b0.png?v=1794069943\" alt=\"2kW air-cooled fiber laser source with fiber cable — DenaliWeld Jet 2000 Laser Cleaning Machine\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eCleaning speed with a laser is a function of average power: the more energy delivered per second, the more rust and coating the beam can ablate per pass. At \u003cstrong\u003e2,000W of continuous output\u003c\/strong\u003e, the Jet 2000 sits at the high end of handheld cleaners, well above the 100W to 500W pulsed units common in the market. DenaliWeld rates its laser source for \u003cstrong\u003ereliable continuous operation\u003c\/strong\u003e from \u003cstrong\u003e-10°C to 40°C\u003c\/strong\u003e, so it holds that output through long jobs. On structural steel, trailers, equipment frames and weld prep, that translates to far more square feet per hour, which is the number that decides whether a laser can replace blasting on a job.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eReach Deep Surfaces and Uneven Parts From a Comfortable Distance\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/denaliweld-fiber-laser-cleaning-head-1024x765.png?v=1794068412\" alt=\"Handheld fiber laser cleaning head with extended lens nozzle — DenaliWeld Jet 2000 Laser Cleaning Machine\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Jet 2000's \u003cstrong\u003efiber laser cleaning head\u003c\/strong\u003e uses an \u003cstrong\u003e800 mm (31.5 in) focal length\u003c\/strong\u003e, which gives the operator a long working distance and a forgiving depth of focus on curved, pitted or recessed surfaces. Its \u003cstrong\u003eextended protective-lens nozzle\u003c\/strong\u003e keeps smoke and debris away from the optics, which DenaliWeld designed to extend lens life and cut consumable cost. The head weighs about 980 g (2.16 lb) and has an ergonomically contoured grip, so an operator can work through a long session without the fatigue that comes with grinders and blast hoses.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSet Up a Job in Seconds With One-Click Presets\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Denaliweld-System-interface-diagram-scaled-1_323deec6-e271-480d-b2cb-b9ebd5c8d0b0.png?v=1794068411\" alt=\"Touchscreen control system with one-click presets — DenaliWeld Jet 2000 Laser Cleaning Machine\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003emonitor and PLC control system\u003c\/strong\u003e stores \u003cstrong\u003epreset cleaning parameters\u003c\/strong\u003e, so an operator selects a program and starts cleaning. Power, frequency and scan width up to \u003cstrong\u003e80 mm (3.15 in)\u003c\/strong\u003e can be adjusted from the capacitive touchscreen for specific coatings, and the system shows status and alarm notifications in real time. That makes the machine usable by a general shop crew rather than one trained specialist, which is what lets laser cleaning become a routine step instead of a special project.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eProtect Your Base Material While Removing the Coating\u003c\/h3\u003e\n\u003cp\u003eAbrasive blasting and grinding remove contaminant and substrate together, which thins metal, changes surface profile and can damage precision fits. A laser cleaner works selectively: the coating or oxide absorbs the energy and is ablated, while the underlying metal reflects most of it. Because the Jet 2000 is a \u003cstrong\u003econtinuous-wave\u003c\/strong\u003e laser, it delivers more heat into the part than a pulsed MOPA cleaner, so it is best matched to \u003cstrong\u003esteel structures, castings and heavier sections\u003c\/strong\u003e rather than thin sheet or delicate finishes. For those, DenaliWeld's \u003cstrong\u003e300W Jet MOPA\u003c\/strong\u003e is the better tool.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCut Out Consumables, Containment and Chemical Disposal\u003c\/h3\u003e\n\u003cp\u003eLaser cleaning needs electricity, shielding gas at \u003cstrong\u003e15–20 L\/min\u003c\/strong\u003e and a protective lens now and then. There is \u003cstrong\u003eno blast media\u003c\/strong\u003e to buy, contain and dispose of, \u003cstrong\u003eno solvent\u003c\/strong\u003e or acid stripper, and no secondary cleanup of grit lodged in machinery. For maintenance teams and fabrication shops that clean regularly, removing those recurring costs and the cleanup labor is often what pays the machine back, alongside the time saved on each job.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eBuy From a U.S. Manufacturer That Stocks Its Own Parts\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/laser-cleaning-machine.png?v=1794069943\" alt=\"Front view of the air-cooled Jet cabinet with touchscreen and emergency stop — DenaliWeld Jet 2000 Laser Cleaning Machine\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eDenaliWeld is an \u003cstrong\u003eemployee-owned\u003c\/strong\u003e laser manufacturer that designs its own laser sources and control systems and \u003cstrong\u003eassembles in Illinois\u003c\/strong\u003e. It keeps parts and consumables in stock at its U.S. facility and builds its machines in modules, so service is typically a part swap guided by DenaliWeld's technicians. Its machines carry \u003cstrong\u003eSGS and CE\u003c\/strong\u003e certification.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDenaliWeld Jet 2000 air-cooled laser cleaning machine with fiber laser cleaning head and 10 m fiber cable\u003c\/li\u003e\n\u003cli\u003eMachine cart\u003c\/li\u003e\n\u003cli\u003e10 protective lenses\u003c\/li\u003e\n\u003cli\u003eLaser-safe helmet\u003c\/li\u003e\n\u003cli\u003eTorch stand\u003c\/li\u003e\n\u003cli\u003eGas regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e2,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eContinuous-wave fiber laser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Wavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1060–1100 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eContinuous \/ modulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 10 m (32.8 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePositioning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser red dot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eGas Flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e15–20 L\/min (0.53–0.71 ft³\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e220V single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e29A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e7 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFocal Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e800 mm (31.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Swing Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 80 mm (3.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–20,000 mm\/s (0–800 in\/s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 980 g (2.16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eHead Operating Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSecurity lock + safety button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCooling System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAir cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eOperating Environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e-10°C to 40°C (14°F to 104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMonitor + PLC, capacitive touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAssembled in Elgin, Illinois, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e3 Years parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eDEN-AC005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe DenaliWeld Jet 2000 Laser Cleaning Machine is \u003cstrong\u003eassembled in Elgin, Illinois\u003c\/strong\u003e and covered by DenaliWeld's \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e, with a 75-day return window through The Maker's Chest.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 \u003cstrong\u003eAuthorized DenaliWeld distributor\u003c\/strong\u003e: DenaliWeld's warranty only covers new machines sold through authorized dealers, so your 3-year coverage is intact\u003c\/li\u003e\n\u003cli\u003e🛠️ \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e with The Maker's Chest helping you work through any claim with DenaliWeld's U.S. technicians\u003c\/li\u003e\n\u003cli\u003e↩️ \u003cstrong\u003e75-day return window\u003c\/strong\u003e on every DenaliWeld machine bought through The Maker's Chest, a level of protection DenaliWeld does not offer on direct purchases\u003c\/li\u003e\n\u003cli\u003e🔍 \u003cstrong\u003eContinuous or pulsed?\u003c\/strong\u003e Send us photos of your parts and coatings and we will tell you whether the 2000W continuous or the 300W MOPA fits the job\u003c\/li\u003e\n\u003cli\u003e⚡ \u003cstrong\u003eElectrical check before you order\u003c\/strong\u003e: we confirm your 220V single-phase circuit can carry the 29A draw\u003c\/li\u003e\n\u003cli\u003e🌬️ \u003cstrong\u003eFume and safety planning\u003c\/strong\u003e: laser cleaning creates fumes and needs a controlled zone, and we help you plan extraction and laser safety before the machine arrives\u003c\/li\u003e\n\u003cli\u003e💬 \u003cstrong\u003eU.S.-based support from The Maker's Chest\u003c\/strong\u003e on setup and consumables, alongside DenaliWeld's own team\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare DenaliWeld Laser Cleaning Machines\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eJet 2000 (continuous)\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eJet MOPA (pulsed)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser power\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e2,000W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e300W\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser mode\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eContinuous \/ modulated\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulse \/ continuous (MOPA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBest at\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFast removal of heavy rust, thick paint and scale on steel\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePrecise, low-heat cleaning on delicate, thin or non-metal surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eScan speed\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–20,000 mm\/s\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–60,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCleaning swing width\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 80 mm (3.15 in)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 350 mm (13.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFocal length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e800 mm (31.5 in)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e210 mm (8.27 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFiber cable\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10 m (32.8 ft)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eInput power\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e220V single-phase, 29A, 7 kW\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e220V single-phase, 6A, 1.3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e$24,999\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e$31,999\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Jet 2000 if\u003c\/strong\u003e your main job is stripping \u003cstrong\u003eheavy rust, mill scale and thick coatings\u003c\/strong\u003e from steel structures, equipment or frames, and speed per square foot matters most.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Jet MOPA if\u003c\/strong\u003e you clean \u003cstrong\u003emolds, thin sheet, aluminum, stainless or non-metal surfaces\u003c\/strong\u003e where heat input, discoloration or base-material damage would be a problem.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the DenaliWeld Jet 2000 Laser Cleaning Machine\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Jet 2000 and the Jet MOPA laser cleaner?\u003c\/strong\u003e\u003cbr\u003e\nA: The Jet 2000 is a \u003cstrong\u003e2,000W continuous-wave\u003c\/strong\u003e cleaner built for fast removal of heavy rust and thick coatings on steel. The Jet MOPA is a \u003cstrong\u003e300W pulsed\u003c\/strong\u003e cleaner that delivers short, controlled pulses for precise, low-heat cleaning on delicate surfaces, thin sheet and non-metals. The Jet 2000 is faster on heavy work; the MOPA is gentler on the part.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can the Jet 2000 laser cleaner remove?\u003c\/strong\u003e\u003cbr\u003e\nA: It removes \u003cstrong\u003erust, paint, mill scale, oxide layers and surface contaminants\u003c\/strong\u003e, and it is well suited to weld prep. It performs best on steel and other robust metals, where its continuous power gives the highest throughput.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will a 2000W laser cleaner damage the metal underneath?\u003c\/strong\u003e\u003cbr\u003e\nA: Laser cleaning removes the coating far more selectively than blasting or grinding. Because a continuous laser puts more heat into the part than a pulsed one, keep the Jet 2000 for \u003cstrong\u003eheavier sections\u003c\/strong\u003e and use a pulsed MOPA cleaner for thin sheet, polished surfaces or heat-sensitive parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What power does the Jet 2000 cleaning machine need?\u003c\/strong\u003e\u003cbr\u003e\nA: It runs on \u003cstrong\u003e220V single-phase\u003c\/strong\u003e power, draws about \u003cstrong\u003e29A\u003c\/strong\u003e and consumes roughly \u003cstrong\u003e7 kW\u003c\/strong\u003e. Have a licensed electrician confirm the circuit before installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the Jet 2000 cleaner need a water chiller?\u003c\/strong\u003e\u003cbr\u003e\nA: No. It is fully \u003cstrong\u003eair-cooled\u003c\/strong\u003e, so there is no chiller, coolant or freeze protection to manage.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does laser cleaning need gas or consumables?\u003c\/strong\u003e\u003cbr\u003e\nA: It uses gas at \u003cstrong\u003e15–20 L\/min\u003c\/strong\u003e to protect the optics and replaceable \u003cstrong\u003eprotective lenses\u003c\/strong\u003e; 10 lenses and a regulator are included. There is no blast media or chemical stripper to buy.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is laser cleaning safe?\u003c\/strong\u003e\u003cbr\u003e\nA: The Jet 2000 is a Class 4 laser. Use laser-rated eye protection (a \u003cstrong\u003elaser-safe helmet is included\u003c\/strong\u003e), control the work zone with barriers or laser curtains, and run \u003cstrong\u003efume extraction\u003c\/strong\u003e, since removed coatings become airborne particulate. The head uses a security lock and safety button.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the warranty valid when I buy through The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The Maker's Chest is an authorized DenaliWeld distributor, so the \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e applies. Repairs are handled at DenaliWeld's U.S. facility; shipping to and from it is the owner's responsibility.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the return policy on the Jet 2000 cleaning machine?\u003c\/strong\u003e\u003cbr\u003e\nA: Purchases from The Maker's Chest include our \u003cstrong\u003e75-day return window\u003c\/strong\u003e. If the Jet 2000 cleaning machine is not the right fit for your shop, contact us within 75 days of delivery to arrange a return.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy the Jet 2000 cleaning machine from The Maker's Chest instead of directly from DenaliWeld?\u003c\/strong\u003e\u003cbr\u003e\nA: The price is the same and the \u003cstrong\u003e3-year DenaliWeld warranty\u003c\/strong\u003e applies in full, because The Maker's Chest is an authorized distributor. You also get a \u003cstrong\u003e75-day return window\u003c\/strong\u003e and a U.S. team that helps you choose between continuous and pulsed cleaning for your actual parts before you buy, and that supports setup, consumables and warranty questions afterward.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eDenaliWeld Jet 2000 Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e2,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eContinuous-wave fiber laser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Wavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1060–1100 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eContinuous \/ modulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 10 m (32.8 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePositioning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser red dot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eGas Flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e15–20 L\/min (0.53–0.71 ft³\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e220V single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e29A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e7 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFocal Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e800 mm (31.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Swing Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 80 mm (3.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–20,000 mm\/s (0–800 in\/s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 980 g (2.16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eHead Operating Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSecurity lock + safety button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCooling System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAir cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eOperating Environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e-10°C to 40°C (14°F to 104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMonitor + PLC, capacitive touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAssembled in Elgin, Illinois, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e3 Years parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eDEN-AC005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eThe DenaliWeld Jet 2000 Laser Cleaning Machine is covered by DenaliWeld's \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e when purchased new from an authorized distributor such as The Maker's Chest. Warranty repairs are performed at DenaliWeld's designated U.S. repair facility; shipping to and from the facility is the owner's responsibility. Fiber cables and laser heads are covered against manufacturing defects, and consumables such as protective lenses are covered only for defects present at delivery.\u003c\/p\u003e\n\u003cp\u003ePurchases from The Maker's Chest include our \u003cstrong\u003e75-day return window\u003c\/strong\u003e.\u003c\/p\u003e","brand":"DenaliWeld","offers":[{"title":"Default Title","offer_id":58082401648806,"sku":"DEN-AC005","price":24999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/laser-cleaning-machine.png?v=1794069943"},{"product_id":"denaliweld-jet-mopa-300w-pulsed-laser-cleaning-machine","title":"DenaliWeld Jet MOPA 300W Pulsed Laser Cleaning Machine","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eRemove Rust, Paint and Oxide Without Marking, Warping or Discoloring the Part Underneath\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe DenaliWeld Jet MOPA uses a \u003cstrong\u003e300W pulsed MOPA fiber laser\u003c\/strong\u003e scanning at up to \u003cstrong\u003e60,000 mm\/s\u003c\/strong\u003e across a \u003cstrong\u003e350 mm cleaning width\u003c\/strong\u003e, plugs into \u003cstrong\u003e220V single-phase\u003c\/strong\u003e power, and draws just \u003cstrong\u003e1.3 kW\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003eSome cleaning jobs are less about speed than about what is left behind. Injection molds, polished stainless, thin aluminum panels, restoration parts, electrical contacts and wood or stone surfaces can all be ruined by abrasive blasting, chemical strippers, or a laser that puts too much heat into the part. The answer is a \u003cstrong\u003epulsed laser\u003c\/strong\u003e: instead of a continuous beam, it fires \u003cstrong\u003eextremely short, high-peak pulses\u003c\/strong\u003e that ablate the contaminant before heat has time to spread into the substrate.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eJet MOPA\u003c\/strong\u003e is DenaliWeld's pulsed cleaner. Its \u003cstrong\u003eMOPA (Master Oscillator Power Amplifier)\u003c\/strong\u003e source lets pulse characteristics be tuned to the coating, so it can lift rust, paint and oxide while leaving the base material intact. It is \u003cstrong\u003eair-cooled\u003c\/strong\u003e, runs on ordinary single-phase power, is assembled in Elgin, Illinois, and carries a 3-year parts and labor warranty.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClean Delicate and Finished Surfaces Without Heat Damage\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/DENALIWELD-JET-MOPA-Laser-Cleaning-Machine.png?v=1794068413\" alt=\"300W MOPA pulsed laser cleaning machine with touchscreen and coiled cable — DenaliWeld Jet MOPA\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eA continuous-wave cleaner delivers steady energy, which is fast on heavy rust but heats the part, and that heat can warp thin sheet, blue stainless or etch a polished face. A \u003cstrong\u003epulsed MOPA laser\u003c\/strong\u003e concentrates its energy into brief pulses with high peak power, so the contaminant vaporizes while the surrounding metal stays cool. DenaliWeld describes the result as cleaning with \u003cstrong\u003eminimal to no trace\u003c\/strong\u003e on the base material. For a mold shop, that means removing residue without changing cavity dimensions; for a restorer, it means stripping paint from an original panel without thinning the metal.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClean Wood, Ceramics and Plastics as Well as Metal\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/laser-rust-removal-gun-head.png?v=1794068413\" alt=\"Air-cooled MOPA laser rust removal cleaning head — DenaliWeld Jet MOPA\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eBecause pulse energy can be dialed down and controlled, MOPA cleaning is not limited to metals. DenaliWeld rates the Jet MOPA for removing contaminants from \u003cstrong\u003emetal, wood, ceramics and plastics\u003c\/strong\u003e, which a high-power continuous cleaner would scorch. That opens up work like cleaning stone and ceramic surfaces, stripping coatings from composite or wooden parts, and preparing mixed-material assemblies. The \u003cstrong\u003eair-cooled cleaning head\u003c\/strong\u003e weighs about \u003cstrong\u003e980 g (2.16 lb)\u003c\/strong\u003e and is rated by DenaliWeld for up to four hours of stable operation without overheating.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCover a Wide Path Quickly With 60,000 mm\/s Scanning\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/denaliweld-air-cooled-fiber-lasers-1024x736_84a509a3-c315-415f-bb85-bee96e101727.png?v=1794068412\" alt=\"Air-cooled fiber laser source architecture — DenaliWeld Jet MOPA\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Jet MOPA's scanning head moves the beam at up to \u003cstrong\u003e60,000 mm\/s\u003c\/strong\u003e and sweeps a cleaning path up to \u003cstrong\u003e350 mm (13.78 in)\u003c\/strong\u003e wide, three times faster scanning and over four times the width of DenaliWeld's 2000W continuous cleaner. A wide, fast scan spreads energy evenly across the surface, which gives a uniform finish without the stripes that come from a narrow beam moved by hand. Its \u003cstrong\u003e210 mm focal length\u003c\/strong\u003e keeps the working distance comfortable for detailed work on molds, parts and panels.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003ePlug Into Standard Power and Roll It Where You Need It\u003c\/h3\u003e\n\u003cp\u003eAt \u003cstrong\u003e1.3 kW\u003c\/strong\u003e and \u003cstrong\u003e6A\u003c\/strong\u003e on \u003cstrong\u003e220V single-phase\u003c\/strong\u003e, the Jet MOPA draws a fraction of the power a high-wattage continuous cleaner needs, so it can run from a typical shop circuit without a new electrical service. The air-cooled design removes the chiller, and the included cart and 5 m (16.4 ft) fiber cable make it easy to move between workstations or onto a job site. DenaliWeld rates the machine for reliable operation from -10°C to 40°C (14°F to 104°F).\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eStart Cleaning in One Click, Then Fine-Tune by Surface\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/Denaliweld-System-interface-diagram-scaled-1_3eb0e913-a23e-43db-baa9-29ea11ca9773.png?v=1794068412\" alt=\"Monitor and PLC control screen with preset cleaning parameters — DenaliWeld Jet MOPA\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003emonitor and PLC control system\u003c\/strong\u003e loads \u003cstrong\u003epreset parameters\u003c\/strong\u003e so a new operator can start with a proven setting, while the \u003cstrong\u003ecapacitive touchscreen\u003c\/strong\u003e gives access to power, frequency, cleaning width and process number for specific coatings. Real-time status and alarm notifications keep the operator informed. That combination lets one machine handle very different jobs, from light oxide on stainless to paint on aluminum, by switching programs instead of changing equipment.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSkip the Media, Solvents and Cleanup\u003c\/h3\u003e\n\u003cp\u003eThe Jet MOPA uses electricity, gas at \u003cstrong\u003e15–20 L\/min\u003c\/strong\u003e to protect the optics, and occasional \u003cstrong\u003eprotective lenses\u003c\/strong\u003e. There is \u003cstrong\u003eno blast media\u003c\/strong\u003e, no chemical stripper, and no secondary cleanup of grit or residue. For mold maintenance, restoration and precision cleaning, eliminating that waste and the masking work it requires is often worth as much as the cleaning speed itself.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDenaliWeld Jet MOPA 300W air-cooled laser cleaning machine with MOPA cleaning head and 5 m fiber cable\u003c\/li\u003e\n\u003cli\u003eMachine cart\u003c\/li\u003e\n\u003cli\u003e10 protective lenses\u003c\/li\u003e\n\u003cli\u003eLaser-safe helmet\u003c\/li\u003e\n\u003cli\u003eGas regulator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMOPA pulsed fiber laser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Wavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1060–1070 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulse \/ continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 5 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePositioning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser red dot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eGas Flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e15–20 L\/min (0.53–0.71 ft³\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAC 220V single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1.3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFocal Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e210 mm (8.27 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Swing Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 350 mm (13.78 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–60,000 mm\/s (0–2,400 in\/s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 980 g (2.16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eHead Operating Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSafety button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCooling System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAir cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eOperating Environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e-10°C to 40°C (14°F to 104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMonitor + PLC, capacitive touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAssembled in Elgin, Illinois, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e3 Years parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eDEN-AC006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe DenaliWeld Jet MOPA 300W Laser Cleaning Machine is \u003cstrong\u003eassembled in Elgin, Illinois\u003c\/strong\u003e and covered by DenaliWeld's \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e, with a 75-day return window through The Maker's Chest.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 \u003cstrong\u003eAuthorized DenaliWeld distributor\u003c\/strong\u003e: DenaliWeld's warranty only covers new machines bought through authorized dealers, so your 3-year coverage is intact\u003c\/li\u003e\n\u003cli\u003e🛠️ \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e, with The Maker's Chest helping you work through any claim with DenaliWeld's U.S. technicians\u003c\/li\u003e\n\u003cli\u003e↩️ \u003cstrong\u003e75-day return window\u003c\/strong\u003e on every DenaliWeld machine bought through The Maker's Chest, a level of protection DenaliWeld does not offer on direct purchases\u003c\/li\u003e\n\u003cli\u003e🔍 \u003cstrong\u003ePulsed or continuous?\u003c\/strong\u003e Send us photos of your parts and we will tell you whether the 300W MOPA or the 2000W continuous cleaner suits the job\u003c\/li\u003e\n\u003cli\u003e🧪 \u003cstrong\u003eSurface-specific guidance\u003c\/strong\u003e on molds, aluminum, stainless and non-metals, so you start with the right expectations for each material\u003c\/li\u003e\n\u003cli\u003e🌬️ \u003cstrong\u003eFume and safety planning\u003c\/strong\u003e: we help you plan extraction and a controlled laser zone before the machine arrives\u003c\/li\u003e\n\u003cli\u003e💬 \u003cstrong\u003eU.S.-based support from The Maker's Chest\u003c\/strong\u003e on setup and consumables, alongside DenaliWeld's own team\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare DenaliWeld Laser Cleaning Machines\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eJet 2000 (continuous)\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eJet MOPA (pulsed)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser power\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e2,000W\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e300W\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser mode\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eContinuous \/ modulated\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulse \/ continuous (MOPA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBest at\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFast removal of heavy rust, thick paint and scale on steel\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePrecise, low-heat cleaning on delicate, thin or non-metal surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eScan speed\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–20,000 mm\/s\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–60,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCleaning swing width\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 80 mm (3.15 in)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 350 mm (13.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFocal length\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e800 mm (31.5 in)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e210 mm (8.27 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFiber cable\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10 m (32.8 ft)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eInput power\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e220V single-phase, 29A, 7 kW\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e220V single-phase, 6A, 1.3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e$24,999\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e$31,999\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Jet 2000 if\u003c\/strong\u003e your main job is stripping \u003cstrong\u003eheavy rust, mill scale and thick coatings\u003c\/strong\u003e from steel structures, equipment or frames, and speed per square foot matters most.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the Jet MOPA if\u003c\/strong\u003e you clean \u003cstrong\u003emolds, thin sheet, aluminum, stainless or non-metal surfaces\u003c\/strong\u003e where heat input, discoloration or base-material damage would be a problem.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the DenaliWeld Jet MOPA 300W Laser Cleaning Machine\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does MOPA mean on a laser cleaner?\u003c\/strong\u003e\u003cbr\u003e\nA: MOPA stands for \u003cstrong\u003eMaster Oscillator Power Amplifier\u003c\/strong\u003e. It is a fiber laser design that allows pulse characteristics to be adjusted, so the cleaner can be tuned to remove a specific coating while limiting heat in the base material.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the Jet MOPA and the Jet 2000 laser cleaner?\u003c\/strong\u003e\u003cbr\u003e\nA: The Jet MOPA is a \u003cstrong\u003e300W pulsed\u003c\/strong\u003e cleaner for precise, low-heat work on delicate surfaces and non-metals. The Jet 2000 is a \u003cstrong\u003e2,000W continuous\u003c\/strong\u003e cleaner built for fast removal of heavy rust and thick coatings on steel. The MOPA scans faster and wider; the 2000W removes more material per hour on heavy jobs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can a 300W pulsed laser remove heavy rust?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes, but more slowly than a high-power continuous cleaner. The MOPA's strength is a \u003cstrong\u003eclean, damage-free finish\u003c\/strong\u003e. If heavy rust on large steel structures is your main job, the 2000W continuous Jet 2000 is the faster tool.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What materials can the Jet MOPA clean?\u003c\/strong\u003e\u003cbr\u003e\nA: DenaliWeld rates it for removing contaminants from \u003cstrong\u003emetal, wood, ceramics and plastics\u003c\/strong\u003e, including rust, paint, oxide layers and surface residue.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What power does the Jet MOPA need?\u003c\/strong\u003e\u003cbr\u003e\nA: It runs on \u003cstrong\u003eAC 220V single-phase\u003c\/strong\u003e power, draws about \u003cstrong\u003e6A\u003c\/strong\u003e and consumes roughly \u003cstrong\u003e1.3 kW\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the Jet MOPA need a chiller?\u003c\/strong\u003e\u003cbr\u003e\nA: No. It is \u003cstrong\u003eair-cooled\u003c\/strong\u003e, and DenaliWeld rates the cleaning head for up to four hours of stable operation without overheating.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is laser cleaning safe?\u003c\/strong\u003e\u003cbr\u003e\nA: It is a Class 4 laser. Use laser-rated eye protection (a \u003cstrong\u003elaser-safe helmet is included\u003c\/strong\u003e), control the work zone with barriers or laser curtains, and run \u003cstrong\u003efume extraction\u003c\/strong\u003e, since removed coatings become airborne particulate.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the warranty valid when I buy through The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. As an authorized DenaliWeld distributor, The Maker's Chest sells the Jet MOPA with the full \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e. Repairs are handled at DenaliWeld's U.S. facility; shipping to and from it is the owner's responsibility.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the return policy on the Jet MOPA?\u003c\/strong\u003e\u003cbr\u003e\nA: Purchases from The Maker's Chest include our \u003cstrong\u003e75-day return window\u003c\/strong\u003e. If the Jet MOPA is not the right fit for your shop, contact us within 75 days of delivery to arrange a return.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy the Jet MOPA from The Maker's Chest instead of directly from DenaliWeld?\u003c\/strong\u003e\u003cbr\u003e\nA: The price is the same and the \u003cstrong\u003e3-year DenaliWeld warranty\u003c\/strong\u003e applies in full, because The Maker's Chest is an authorized distributor. You also get a \u003cstrong\u003e75-day return window\u003c\/strong\u003e and a U.S. team that helps you choose between continuous and pulsed cleaning for your actual parts before you buy, and that supports setup, consumables and warranty questions afterward.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eDenaliWeld Jet MOPA 300W Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMOPA pulsed fiber laser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Wavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1060–1070 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulse \/ continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Cable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 5 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePositioning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser red dot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eGas Flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e15–20 L\/min (0.53–0.71 ft³\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAC 220V single-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eRated Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1.3 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFocal Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e210 mm (8.27 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Swing Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 350 mm (13.78 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–60,000 mm\/s (0–2,400 in\/s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eApprox. 980 g (2.16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eHead Operating Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSafety button\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCooling System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAir cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eOperating Environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e-10°C to 40°C (14°F to 104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eControl\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMonitor + PLC, capacitive touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eAssembly\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAssembled in Elgin, Illinois, USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e3 Years parts and labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eDEN-AC006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eThe DenaliWeld Jet MOPA 300W Laser Cleaning Machine is covered by DenaliWeld's \u003cstrong\u003e3-year parts and labor warranty\u003c\/strong\u003e when purchased new from an authorized distributor such as The Maker's Chest. Warranty repairs are performed at DenaliWeld's designated U.S. repair facility; shipping to and from the facility is the owner's responsibility. Fiber cables and laser heads are covered against manufacturing defects, and consumables such as protective lenses are covered only for defects present at delivery.\u003c\/p\u003e\n\u003cp\u003ePurchases from The Maker's Chest include our \u003cstrong\u003e75-day return window\u003c\/strong\u003e.\u003c\/p\u003e","brand":"DenaliWeld","offers":[{"title":"Default Title","offer_id":58082401943718,"sku":"DEN-AC006","price":31999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/DENALIWELD-JET-MOPA-Laser-Cleaning-Machine.png?v=1794068413"},{"product_id":"theo-tm-300-300w-pulsed-laser-cleaning-machine","title":"THEO TM-300 300W Pulsed Laser Cleaning Machine","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStrip Rust, Paint and Oxide Without Changing the Metal Underneath — 300W MOPA Pulses, Up to 1 m² per Minute\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe THEO TM-300 pairs a \u003cstrong\u003e300W pulsed MOPA fiber laser\u003c\/strong\u003e from Maxphotonics with a \u003cstrong\u003e7,500 mm\/s\u003c\/strong\u003e scan head, three interchangeable field lenses and an \u003cstrong\u003eair-cooled, 100–240V\u003c\/strong\u003e cart, in your choice of \u003cstrong\u003eGaussian (≤1.8 mJ)\u003c\/strong\u003e or \u003cstrong\u003eFlat-Top (≤15 mJ)\u003c\/strong\u003e beam.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe loading=\"lazy\" width=\"560\" height=\"315\" style=\"width: 100%; max-width: 100%; height: auto; aspect-ratio: 16\/9;\" src=\"https:\/\/www.youtube.com\/embed\/U-xEXORZFP8\" title=\"THEO Laser Cleaner: quicker and smoother cleaning processes\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eGrinding, sandblasting and chemical stripping all get the coating off, but each takes something with it. Abrasives remove base metal and leave a profile you may not want, blasting media has to be contained and swept up, and strippers create waste you have to pay to dispose of. On a weld seam, a mold, a car body panel or a stainless food-service surface, that collateral damage is often the bigger problem than the rust itself.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eTHEO TM-300\u003c\/strong\u003e removes the contaminant with light instead. Each pulse is absorbed by the rust, paint, oxide or grease layer, which heats instantly and lifts away as vapor or fine particulate that a fume extractor can capture. Because the TM-300 uses \u003cstrong\u003eMOPA pulsed technology\u003c\/strong\u003e rather than a continuous beam, the base material gets time to cool between pulses, so a correctly set-up pass leaves the substrate essentially untouched. It is built by \u003cstrong\u003eTHEO, the handheld laser brand of Maxphotonics\u003c\/strong\u003e, a fiber laser manufacturer producing over 200,000 laser units a year, and it is backed by THEO's service center in Westborough, Massachusetts.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClean Without Melting the Substrate: Why the TM-300 Uses MOPA Pulses\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/theo-tm-300-cleaning-beam.webp?v=1794464076\" alt=\"Laser cleaning beam sweeping a metal surface below the scan head — THEO TM-300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eMany laser cleaners use \u003cstrong\u003econtinuous-wave (CW)\u003c\/strong\u003e sources. A CW beam delivers constant heat, and on thin sheet, polished stainless or a precision mold that heat can melt or discolor the surface even after the coating is gone — the part can look clean while the metal underneath has already changed. The TM-300's \u003cstrong\u003eMOPA (Master Oscillator Power Amplifier)\u003c\/strong\u003e source instead fires short, controlled bursts with a \u003cstrong\u003epulse width adjustable from 10 to 500 ns\u003c\/strong\u003e. Each burst hits the contamination hard, then the material cools before the next pulse lands, which limits heat spread into the base metal. In practice that means you can prep a weld joint, strip a painted panel or clean a mold cavity without warping, bluing or changing dimensions.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003ePick the Beam That Fits the Job: Gaussian or Flat-Top\u003c\/h3\u003e\n\u003cp\u003eBoth TM-300 versions share the same 300W platform, cart, head and controls; the difference is how energy is spread across the laser spot. The \u003cstrong\u003eGaussian\u003c\/strong\u003e version uses a \u003cstrong\u003e30 µm fiber core\u003c\/strong\u003e and a beam quality of \u003cstrong\u003eM² ≤ 1.6\u003c\/strong\u003e to concentrate energy into a tight, high-intensity spot with pulse frequency up to \u003cstrong\u003e8,000 kHz\u003c\/strong\u003e. THEO positions it for \u003cstrong\u003edeeper contamination\u003c\/strong\u003e such as heavy oxide and rust. The \u003cstrong\u003eFlat-Top\u003c\/strong\u003e version uses a \u003cstrong\u003e100 µm core\u003c\/strong\u003e and delivers up to \u003cstrong\u003e15 mJ per pulse\u003c\/strong\u003e across a wide, even spot, which THEO describes as fast and forgiving. It is the pick when the base material must stay untouched — mold stations, car bodies and industrial kitchens. Both handle everyday rust, paint and oxide removal, pre- and post-weld cleaning, and surface prep before coating.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCover Up to 1 m² per Minute With a 7,500 mm\/s Scan Head\u003c\/h3\u003e\n\u003cp\u003eThe cleaning head sweeps the beam at up to \u003cstrong\u003e7,500 mm\/s\u003c\/strong\u003e, and THEO rates the TM-300 for \u003cstrong\u003ecleaning speeds up to 1 m² per minute\u003c\/strong\u003e. Four scan patterns — \u003cstrong\u003eline, circle, wave and dynamic\u003c\/strong\u003e — let you match the motion to the part: a line for seams and edges, a circle for bosses and fastener areas, and wave or dynamic patterns for broad panels. Fill spacing (hatch pitch) is adjustable from 0 to 50, so you can tighten the pattern for a denser, more thorough pass or open it up for speed on light surface oxide. Compared with hand-grinding a weld seam or masking and blasting a panel, that is minutes of work instead of an afternoon, with no media cleanup afterward.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSwap Lenses to Trade Coverage for Concentration\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/theo-tm-300-f330-field-lens.jpg?v=1794464077\" alt=\"F330 field lens for wide-area cleaning up to 150 × 150 mm — THEO TM-300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThree field lenses ship in the box — \u003cstrong\u003e160 mm, 254 mm and 330 mm\u003c\/strong\u003e — and they change the job the machine is best at. The 160 mm lens gives a \u003cstrong\u003e70 × 70 mm\u003c\/strong\u003e cleaning field that puts the full 300W into a tighter, more aggressive pass for stubborn rust or tight spots. The 254 mm lens opens the field to \u003cstrong\u003e130 × 130 mm\u003c\/strong\u003e, and the 330 mm lens covers up to \u003cstrong\u003e150 × 150 mm\u003c\/strong\u003e for faster work on large flat surfaces. Circle scan radius scales with the lens, from 5–35 mm up to 5–75 mm. Being able to change focal length in the field means one machine can handle precision spot-cleaning on a machine component in the morning and wide-area paint removal on a frame in the afternoon.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSet Up Fast With Presets, a Distance Meter and Handle-Side Controls\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/theo-tm-300-touchscreen.webp?v=1794464076\" alt=\"10.4-inch touchscreen control panel on the laser cleaner cart — THEO TM-300\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e10.4-inch touchscreen\u003c\/strong\u003e comes loaded with presets, so a new operator can start from a proven setting instead of guessing at power and frequency. A \u003cstrong\u003ebuilt-in distance meter\u003c\/strong\u003e with real-time visual feedback locks the focal point, which matters because laser cleaning results drop off quickly when the head drifts out of focus. A \u003cstrong\u003e1.8-inch screen on the handle\u003c\/strong\u003e lets the operator adjust settings at the workpiece without walking back to the cart, and the \u003cstrong\u003ecleaning head weighs about 2 kg (4.4 lb)\u003c\/strong\u003e, light enough for extended sessions without the fatigue of holding a grinder or blast nozzle. The companion \u003cstrong\u003eTHEO Toolbox app\u003c\/strong\u003e handles machine registration, a parameter database and access to THEO Academy training.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eBuilt-In Safeguards That Protect the Operator and Everyone Nearby\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/theo-tm-300-cleaning-engine-head.jpg?v=1794464077\" alt=\"Operator in laser PPE cleaning an engine cylinder head — THEO TM-300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TM-300 is a Class 4 laser, and THEO designed its controls around that. \u003cstrong\u003eSmart shut-down\u003c\/strong\u003e means the laser fires only when the head is aimed at the workpiece. \u003cstrong\u003eDual-channel interlocks\u003c\/strong\u003e stop operation unless every safety condition is met, and \u003cstrong\u003efiber breakage detection\u003c\/strong\u003e monitors the cable constantly, with instant alerts and pinpoint diagnostics. The cart adds an emergency stop, a key switch, and external safety (EX SAFETY) and control (EX-CTRL) connections. Unlike sandblasting or chemical stripping, there is no toxic dust cloud or chemical runoff; THEO recommends a \u003cstrong\u003efume extractor\u003c\/strong\u003e and proper laser PPE, including a powered breathing system, whenever you clean. The machine carries \u003cstrong\u003eCE, FDA and FCC\u003c\/strong\u003e certification.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eRoll It to the Job: Air-Cooled, Wide-Voltage and Chiller-Free\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/theo-tm-300-laser-cleaner.png?v=1794464077\" alt=\"300W pulsed laser cleaning machine on wheeled cart with green status light — THEO TM-300\" style=\"width: 100%; height: auto; margin-bottom: 16px;\"\u003e\u003c\/p\u003e\n\u003cp\u003eSome industrial laser cleaners need a separate water chiller, which adds weight, plumbing and another machine to maintain. The TM-300 is \u003cstrong\u003eair-cooled\u003c\/strong\u003e, accepts \u003cstrong\u003e100–240V, 50\/60 Hz\u003c\/strong\u003e input (THEO lists 120V or 230V at 16A), and rides on a wheeled cart with dedicated holders for the head and fiber cable. The \u003cstrong\u003e5 m (16.4 ft) fiber\u003c\/strong\u003e gives a generous working radius around the cart. At roughly \u003cstrong\u003e46 kg (101 lb)\u003c\/strong\u003e, it rolls between bays or onto a trailer for field work, then rolls back without rigging or a forklift.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the TM-300 Is Built For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabrication and welding shops\u003c\/strong\u003e doing pre-weld oil and scale removal and post-weld oxide cleanup on stainless and aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMold and die maintenance\u003c\/strong\u003e where residue must come off without changing cavity surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive restoration and collision shops\u003c\/strong\u003e stripping paint and rust from panels and components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial maintenance teams\u003c\/strong\u003e cleaning machine components, tooling and equipment in place\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating and finishing operations\u003c\/strong\u003e preparing surfaces before paint or powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood-service and commercial kitchen equipment\u003c\/strong\u003e cleaning where the Flat-Top version's gentle profile protects stainless surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTHEO TM-300 300W air-cooled laser cleaning unit (Gaussian or Flat-Top version) on wheeled cart\u003c\/li\u003e\n\u003cli\u003eHandheld cleaning head with 5 m fiber cable\u003c\/li\u003e\n\u003cli\u003eF160 field lens (160 mm)\u003c\/li\u003e\n\u003cli\u003eF254 field lens (254 mm)\u003c\/li\u003e\n\u003cli\u003eF330 field lens (330 mm)\u003c\/li\u003e\n\u003cli\u003eProtective lens for the field lenses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eNominal Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulsed MOPA fiber laser (Maxphotonics)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1060–1070 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eBeam Profile Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian \/ Flat-Top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eSingle Pulse Energy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: ≤ 1.8 mJ \/ Flat-Top: ≤ 15 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePulse Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: 165–8,000 kHz \/ Flat-Top: 1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePulse Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: 10–500 ns \/ Flat-Top: 20–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Core Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: 30 µm \/ Flat-Top: 100 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eBeam Quality (M²)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: ≤ 1.6 \/ Flat-Top: 10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 1 m²\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e7,500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eField Lenses\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e160 \/ 254 \/ 330 mm, interchangeable (all three included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Field\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e70 × 70 mm (160 mm lens) \/ 130 × 130 mm (254 mm) \/ 150 × 150 mm (330 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Patterns\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLine \/ Circle \/ Wave \/ Dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Radius (Circle)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5–35 mm (160 mm) \/ 5–65 mm (254 mm) \/ 5–75 mm (330 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFill Spacing (Hatch Pitch)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–50, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eHead Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e≤ 2 kg (approx. 4.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e373 × 179 × 205 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10.4\" touchscreen + 1.8\" handle screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAir-cooled (no chiller)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e100–240V, 50\/60 Hz (120V \/ 230V, 16A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–40°C (32–104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eMachine Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e46 ± 3 kg (approx. 101 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eMachine Dimensions (W × D × H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e960 × 677 × 417 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSmart shut-down, dual-channel interlocks, fiber breakage detection, emergency stop, key switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCE, FDA, FCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1 Year (2 Years once registered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe THEO TM-300 Laser Cleaning Machine is \u003cstrong\u003eengineered by Maxphotonics\u003c\/strong\u003e and carries a \u003cstrong\u003e1-year warranty that extends to 2 years once the machine is registered\u003c\/strong\u003e with THEO, with North American service from THEO's center in Westborough, Massachusetts. Purchases from The Maker's Chest include our \u003cstrong\u003e75-day return window\u003c\/strong\u003e. \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/58932B46-E04C-46D7-92E0-B6A1E1F7E491?v=1794451896\" rel=\"noopener\" target=\"_blank\"\u003eDownload the THEO TM-300 brochure and full specifications (PDF)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e🇺🇸 \u003cstrong\u003eSold through a licensed THEO distribution partner\u003c\/strong\u003e, so your machine is eligible for THEO's full warranty and its 2-year registered coverage\u003c\/li\u003e\n\u003cli\u003e↩️ \u003cstrong\u003e75-day return window\u003c\/strong\u003e on the TM-300 when you buy through The Maker's Chest, far longer than typical industrial equipment return terms\u003c\/li\u003e\n\u003cli\u003e🔍 \u003cstrong\u003eGaussian or Flat-Top?\u003c\/strong\u003e Send us photos of your parts and coatings and we will help you choose the beam profile that fits the work before you order\u003c\/li\u003e\n\u003cli\u003e🔬 \u003cstrong\u003eLens and parameter guidance\u003c\/strong\u003e: we help you decide when to run the 160, 254 or 330 mm lens and how to start from THEO's presets on your materials\u003c\/li\u003e\n\u003cli\u003e🌬️ \u003cstrong\u003eFume and safety planning\u003c\/strong\u003e: we help you plan extraction, laser PPE and a controlled laser zone before the machine arrives\u003c\/li\u003e\n\u003cli\u003e🛠️ \u003cstrong\u003eWarranty and parts help\u003c\/strong\u003e: we coordinate with THEO's Westborough, MA service center on registration, claims and replacement lenses\u003c\/li\u003e\n\u003cli\u003e💬 \u003cstrong\u003eU.S.-based support from The Maker's Chest\u003c\/strong\u003e by phone and email, alongside THEO's own support team\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare TM-300 Gaussian vs. TM-300 Flat-Top\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eSpec\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eTM-300 Gaussian\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; text-align: left;\"\u003eTM-300 Flat-Top\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFiber core diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e30 µm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003e100 µm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSingle pulse energy\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e≤ 1.8 mJ\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e≤ 15 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulse frequency\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e165–8,000 kHz\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulse width\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10–500 ns\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e20–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBeam quality (M²)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e≤ 1.6\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSpot character\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eTight, high-intensity\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eWide, even energy distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eTHEO's recommended use\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eDeeper contamination: oxide and rust removal\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBase material must stay untouched: molds, car bodies, industrial kitchens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the TM-300 Gaussian if\u003c\/strong\u003e your work is mostly \u003cstrong\u003eheavier rust, scale and oxide\u003c\/strong\u003e, weld-seam cleanup and precision spot-cleaning, where a concentrated, high-intensity spot cuts through deeper contamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the TM-300 Flat-Top if\u003c\/strong\u003e you clean \u003cstrong\u003emolds, painted car bodies, stainless kitchen equipment or other finished surfaces\u003c\/strong\u003e where an even, forgiving energy profile matters more than penetration.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the THEO TM-300 Laser Cleaning Machine\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the TM-300 Gaussian and TM-300 Flat-Top?\u003c\/strong\u003e\u003cbr\u003eA: Both are 300W pulsed MOPA cleaners on the same platform. The \u003cstrong\u003eGaussian\u003c\/strong\u003e uses a 30 µm fiber core for a tight, high-intensity spot (≤1.8 mJ per pulse) and is THEO's recommendation for deeper rust and oxide. The \u003cstrong\u003eFlat-Top\u003c\/strong\u003e uses a 100 µm core for a wide, even spot (≤15 mJ per pulse) and is recommended where the base material must stay untouched, such as molds, car bodies and commercial kitchen equipment.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can the THEO TM-300 remove?\u003c\/strong\u003e\u003cbr\u003eA: It removes \u003cstrong\u003erust, paint, oxides, corrosion, grease, oil and scale\u003c\/strong\u003e, and is used for pre- and post-weld cleaning, surface prep before coating, and restoration work.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What materials can the TM-300 clean?\u003c\/strong\u003e\u003cbr\u003eA: THEO rates it for \u003cstrong\u003estainless steel, aluminum, structural steel, copper and stone\u003c\/strong\u003e, as well as select woods and plastics when parameters are set correctly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is a pulsed laser cleaner better than a continuous-wave laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: For surfaces you need to protect, yes. A continuous-wave beam delivers constant heat that can melt or discolor the substrate. The TM-300's \u003cstrong\u003eMOPA pulses\u003c\/strong\u003e deliver energy in short bursts with cooling time between them, so contamination is removed while heat spread into the base metal stays minimal. High-power continuous cleaners can be faster on very heavy rust on thick structural steel, where surface finish matters less.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How fast does the TM-300 clean?\u003c\/strong\u003e\u003cbr\u003eA: THEO rates it for \u003cstrong\u003eup to 1 m² per minute\u003c\/strong\u003e, with a \u003cstrong\u003e7,500 mm\/s\u003c\/strong\u003e scan speed. Actual speed depends on the coating thickness, the lens you choose and the finish you need.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What power does the TM-300 need, and does it need a chiller?\u003c\/strong\u003e\u003cbr\u003eA: It accepts \u003cstrong\u003e100–240V, 50\/60 Hz\u003c\/strong\u003e input, with THEO listing 120V or 230V at \u003cstrong\u003e16A\u003c\/strong\u003e. It is \u003cstrong\u003eair-cooled\u003c\/strong\u003e, so no external water chiller is required.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How heavy is the TM-300?\u003c\/strong\u003e\u003cbr\u003eA: The machine weighs about \u003cstrong\u003e46 kg (101 lb)\u003c\/strong\u003e and rolls on a wheeled cart. The handheld cleaning head weighs \u003cstrong\u003eabout 2 kg (4.4 lb)\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is laser cleaning safe, and what safety equipment do I need?\u003c\/strong\u003e\u003cbr\u003eA: The TM-300 is a Class 4 laser with built-in \u003cstrong\u003esmart shut-down, dual-channel interlocks and fiber breakage detection\u003c\/strong\u003e. You still need laser-rated eye and skin protection, a controlled work zone, and a \u003cstrong\u003efume extractor\u003c\/strong\u003e to capture removed material. THEO recommends wearing a powered breathing system whenever you clean.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What warranty comes with the THEO TM-300?\u003c\/strong\u003e\u003cbr\u003eA: THEO provides a \u003cstrong\u003e1-year warranty, extended to 2 years\u003c\/strong\u003e when you register the machine (registration is done through the THEO Toolbox app). North American service is handled by THEO's center in Westborough, Massachusetts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the return policy on the TM-300?\u003c\/strong\u003e\u003cbr\u003eA: Purchases from The Maker's Chest include our \u003cstrong\u003e75-day return window\u003c\/strong\u003e. If the TM-300 is not the right fit for your shop, contact us within 75 days to arrange a return.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy the THEO TM-300 from The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003eA: You get THEO's full factory warranty plus a \u003cstrong\u003e75-day return window\u003c\/strong\u003e, and a U.S. team that helps you choose between the Gaussian and Flat-Top versions for your actual parts before you buy, then supports lens selection, fume and safety planning, registration and warranty questions afterward.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eTHEO TM-300 Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eNominal Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eLaser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePulsed MOPA fiber laser (Maxphotonics)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWavelength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1060–1070 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eBeam Profile Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian \/ Flat-Top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eSingle Pulse Energy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: ≤ 1.8 mJ \/ Flat-Top: ≤ 15 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePulse Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: 165–8,000 kHz \/ Flat-Top: 1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003ePulse Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: 10–500 ns \/ Flat-Top: 20–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Core Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: 30 µm \/ Flat-Top: 100 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eBeam Quality (M²)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eGaussian: ≤ 1.6 \/ Flat-Top: 10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFiber Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5 m (16.4 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eUp to 1 m²\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e7,500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eField Lenses\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e160 \/ 254 \/ 330 mm, interchangeable (all three included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Field\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e70 × 70 mm (160 mm lens) \/ 130 × 130 mm (254 mm) \/ 150 × 150 mm (330 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Patterns\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLine \/ Circle \/ Wave \/ Dynamic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eScan Radius (Circle)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e5–35 mm (160 mm) \/ 5–65 mm (254 mm) \/ 5–75 mm (330 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eFill Spacing (Hatch Pitch)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–50, adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eHead Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e≤ 2 kg (approx. 4.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCleaning Head Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e373 × 179 × 205 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e10.4\" touchscreen + 1.8\" handle screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCooling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eAir-cooled (no chiller)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eInput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e100–240V, 50\/60 Hz (120V \/ 230V, 16A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e0–40°C (32–104°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eMachine Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e46 ± 3 kg (approx. 101 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eMachine Dimensions (W × D × H)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e960 × 677 × 417 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSmart shut-down, dual-channel interlocks, fiber breakage detection, emergency stop, key switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eCertification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCE, FDA, FCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e1 Year (2 Years once registered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eWarranty \u0026amp; Manuals\u003c\/h5\u003e\n\u003ch6\u003eTHEO TM-300 Laser Cleaning Machine Warranty Details:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eTHEO TM-300 Laser Cleaning Machine comes with a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e, extended to a \u003cstrong\u003e2-year warranty once the machine is registered\u003c\/strong\u003e with THEO.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-day return window\u003c\/strong\u003e on purchases from The Maker's Chest.\u003c\/li\u003e\n\u003cli\u003eDedicated, \u003cstrong\u003elocal US-based support\u003c\/strong\u003e from The Maker's Chest, with North American service from THEO's center in Westborough, Massachusetts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eTHEO TM-300 Laser Cleaning Machine Product Brochure:\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/58932B46-E04C-46D7-92E0-B6A1E1F7E491?v=1794451896\" rel=\"noopener\" target=\"_blank\"\u003eDownload the THEO TM-300 brochure and full specifications (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"Theo","offers":[{"title":"Gaussian","offer_id":58147947937958,"sku":"THEO-TM-300-G","price":29980.0,"currency_code":"USD","in_stock":true},{"title":"Flat-Top","offer_id":58147947970726,"sku":"THEO-TM-300-F","price":29980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/theo-tm-300-laser-cleaner.png?v=1794709530"},{"product_id":"haotian-ht-300-300w-5mj-jpt-pulsed-laser-cleaner","title":"Haotian HT-300 300W 5 mJ JPT Pulsed Laser Cleaner","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStrip Rust, Paint and Oxide Without Damaging the Metal Underneath\u003c\/span\u003e\u003c\/h2\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe Haotian HT-300 pairs a \u003cstrong\u003e300 W JPT MOPA pulsed fiber source\u003c\/strong\u003e delivering up to \u003cstrong\u003e5 mJ per pulse\u003c\/strong\u003e with a 12-pattern scan head, in an air-cooled cabinet that runs on \u003cstrong\u003e110 V or 220–240 V\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/h3\u003e\u003cp\u003eWire wheels, sandblasters and chemical strippers all take something you wanted to keep. A wire wheel rounds crisp edges, blasting media erodes the surface and has to be contained and swept up, and strippers leave hazardous waste behind. On \u003cstrong\u003emolds, tooling, restoration parts and finished components\u003c\/strong\u003e, that collateral damage often costs more than the cleaning itself.\u003c\/p\u003e\u003cp\u003eThe HT-300 removes contamination with \u003cstrong\u003enon-contact pulsed laser ablation\u003c\/strong\u003e. Rust, paint and oxide absorb the 1,064 nm beam and vaporize, while clean metal underneath reflects most of the energy. There's \u003cstrong\u003eno media, no chemicals and no consumables\u003c\/strong\u003e beyond protective lenses, and because it plugs into an ordinary 110 V circuit, it goes wherever the work is.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eRemove the Coating and Keep the Surface Finish\u003c\/h3\u003e\u003cp\u003eA pulsed source fires energy in bursts lasting \u003cstrong\u003e13 to 500 nanoseconds\u003c\/strong\u003e, each one carrying up to \u003cstrong\u003e5 mJ\u003c\/strong\u003e. That's enough peak power to break the bond between a contaminant and the substrate, but each pulse is too brief for heat to soak into the part. A continuous-wave cleaner works the other way: it pours steady heat onto the surface, which is fast on heavy structural steel but can \u003cstrong\u003eheat-tint stainless, warp thin sheet or change a mold's texture\u003c\/strong\u003e. For aluminum castings, thin panels, polished tooling and parts with machined edges, pulsed cleaning is what lets you strip the surface back to bare metal and leave the geometry exactly as it was.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eDial In Every Job, From Light Oxide to Thick Paint\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMOPA\u003c\/strong\u003e (master oscillator power amplifier) design is what separates the HT-300 from basic Q-switched cleaners, which run at a fixed pulse width. Here you set \u003cstrong\u003epulse duration (13–500 ns)\u003c\/strong\u003e, \u003cstrong\u003erepetition rate (1–3,000 kHz)\u003c\/strong\u003e and power (10–100%) independently. Short pulses at high frequency give a fine, even finish on light oxide, weld discoloration and thin coatings. Longer, higher-energy pulses at lower frequency hit harder for paint and stubborn rust. One machine covers both, and once a setting works on a part, you can repeat it on the next batch.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eMatch the Cleaning Path to the Shape of the Part\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eZBTK controller\u003c\/strong\u003e drives a \u003cstrong\u003edual-axis galvo scan head\u003c\/strong\u003e through \u003cstrong\u003e12 scan patterns\u003c\/strong\u003e, from a single line to wide fills. A narrow line cleans a weld seam, a groove or the edge of a flange without overspraying onto the finished face beside it. A wide rectangle or fill clears a flat surface in fewer passes. Single-axis heads can only sweep a line back and forth, so matching the pattern to the feature means \u003cstrong\u003eless overlap, fewer passes and less time per part\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSee Exactly Where the Laser Will Clean Before It Fires\u003c\/h3\u003e\u003cp\u003eThe handheld head projects \u003cstrong\u003edual red aiming guides\u003c\/strong\u003e onto the part, outlining the scan area before the laser fires. The operator can line up on a seam, stay inside a masked boundary or work right up to a gasket face \u003cstrong\u003ewithout guessing where the beam will land\u003c\/strong\u003e. That matters on assemblies where the area next to the rust has to stay untouched, and it shortens the learning curve for new operators, who can see the result of each positioning change instantly.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003ePlug In and Work — No Chiller, No Coolant\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/haotian-ht-300-pulsed-laser-cleaner.jpg?v=1794721521\" alt=\"Air-cooled cabinet and coiled handpiece lead — Haotian HT-300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe HT-300 is \u003cstrong\u003efully air cooled\u003c\/strong\u003e. There's no water chiller to buy, fill with distilled water, service or protect from freezing in an unheated building or service truck. The \u003cstrong\u003e5 m fiber lead\u003c\/strong\u003e lets the operator walk around a fixture, vehicle or assembly while the cabinet stays parked, and at \u003cstrong\u003e800 g\u003c\/strong\u003e the cleaning head is light enough for long handheld sessions without fatigue affecting accuracy. Setup is unpacking, connecting air and power, and starting work.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eRun It From a Standard 110 V Shop Outlet\u003c\/h3\u003e\u003cp\u003eHaotian builds the HT-300 in \u003cstrong\u003e110 V\u003c\/strong\u003e and \u003cstrong\u003e220–240 V single-phase\u003c\/strong\u003e versions, both drawing just \u003cstrong\u003e960 W\u003c\/strong\u003e: \u003cstrong\u003e9 A at 110 V\u003c\/strong\u003e or \u003cstrong\u003e4.5 A at 220 V\u003c\/strong\u003e. Most 1,500–3,000 W continuous-wave cleaners need a dedicated 220 V or three-phase supply, so this is a real installation saving. The 110 V build runs from an ordinary U.S. shop receptacle, ideally on a dedicated 15–20 A circuit, and can move between bays, buildings or \u003cstrong\u003ecustomer job sites\u003c\/strong\u003e without calling an electrician.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eKeep the Optics Clean With Dry Air Assist\u003c\/h3\u003e\u003cp\u003eHaotian specifies \u003cstrong\u003efiltered, dry compressed air\u003c\/strong\u003e at the cleaning head and includes \u003cstrong\u003e3 m of air tubing\u003c\/strong\u003e. The air stream pushes ablated debris and fume away from the protective lens, which keeps beam quality consistent and extends lens life. Moist or oily shop air would coat the optics, so run it through a filter-dryer. The \u003cstrong\u003esix spare D43 × 2 protective lenses\u003c\/strong\u003e in the box cover routine replacement for months of normal use.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the HT-300 Is Built For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomotive, motorcycle and equipment restoration shops removing rust and paint from parts and panels\u003c\/li\u003e\n\u003cli\u003eMold, die and tooling maintenance where cavity texture and edges must be preserved\u003c\/li\u003e\n\u003cli\u003eFabricators cleaning mill scale before welding and heat discoloration after\u003c\/li\u003e\n\u003cli\u003eMaintenance teams and mobile cleaning services working on 110 V power\u003c\/li\u003e\n\u003cli\u003eUniversities, technical colleges and training programs teaching modern surface preparation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHaotian HT-300 machine with handheld dual-axis scan head and 5 m fiber cable\u003c\/li\u003e\n\u003cli\u003eSix D43 × 2 protective lenses\u003c\/li\u003e\n\u003cli\u003eWrench set\u003c\/li\u003e\n\u003cli\u003eOne pair of OD8+ laser safety glasses\u003c\/li\u003e\n\u003cli\u003e3 m of air tubing\u003c\/li\u003e\n\u003cli\u003eEnglish user manual and certificate of qualification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHT-300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser output\u003c\/th\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum single-pulse energy\u003c\/th\u003e\n\u003ctd\u003e5 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1,064 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse duration\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate range\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e10–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController\u003c\/th\u003e\n\u003ctd\u003eZBTK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan head\u003c\/th\u003e\n\u003ctd\u003eDual-axis head with dual red aiming guides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning head weight\u003c\/th\u003e\n\u003ctd\u003e800 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput options\u003c\/th\u003e\n\u003ctd\u003e110 V or 220–240 V, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer-listed input current\u003c\/th\u003e\n\u003ctd\u003e9 A at 110 V \/ 4.5 A at 220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e960 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir assist\u003c\/th\u003e\n\u003ctd\u003eFiltered, dry compressed air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWarranty\u003c\/h3\u003e\u003cp\u003eThe Haotian HT-300 is covered by a \u003cstrong\u003e3-year warranty\u003c\/strong\u003e when purchased through The Maker's Chest, three times the 1-year term common on imported laser cleaners, and is backed by \u003cstrong\u003eUSA-based technical support\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHaotian machines are built to order\u003c\/strong\u003e, so The Maker's Chest \u003cstrong\u003edoes not accept returns\u003c\/strong\u003e on Haotian equipment. We review your application before you order so the machine you receive is the right one.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e🛡️ \u003cstrong\u003e3-year warranty\u003c\/strong\u003e on the HT-300, compared with the 1-year coverage typical of imported pulsed cleaners.\u003c\/li\u003e\n\u003cli\u003e🇺🇸 \u003cstrong\u003eUSA-based technical support\u003c\/strong\u003e for setup, parameter questions and troubleshooting, in your time zone.\u003c\/li\u003e\n\u003cli\u003e🔬 \u003cstrong\u003eApplication review before you order.\u003c\/strong\u003e Because Haotian machines are built to order and can't be returned, we look at photos of your parts, the contaminant and the base metal and confirm that 300 W pulsed is the right tool.\u003c\/li\u003e\n\u003cli\u003e⚖️ \u003cstrong\u003ePulsed vs. continuous-wave, answered honestly.\u003c\/strong\u003e We sell both types of laser cleaner, so we'll point you to a CW machine if your work is heavy structural steel where speed matters more than heat.\u003c\/li\u003e\n\u003cli\u003e🔌 \u003cstrong\u003eVoltage guidance.\u003c\/strong\u003e We'll help you choose between the 110 V and 220–240 V builds based on where and how you'll use the machine.\u003c\/li\u003e\n\u003cli\u003e🧯 \u003cstrong\u003eComplete safety setup.\u003c\/strong\u003e We can pair the HT-300 with a fume extractor from our range and advise on 1,064 nm eyewear and laser barriers for your work area.\u003c\/li\u003e\n\u003cli\u003e🏫 \u003cstrong\u003eInstitutional purchasing experience.\u003c\/strong\u003e We supply laser equipment to universities, schools and businesses and can handle quotes, POs and vendor paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eChoose the Input Voltage for Your Shop\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eConfiguration\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e110 V\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e220–240 V\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003e110 V single phase\u003c\/td\u003e\n\u003ctd\u003e220–240 V single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer-listed current\u003c\/th\u003e\n\u003ctd\u003e9 A at 110 V\u003c\/td\u003e\n\u003ctd\u003e4.5 A at 220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e960 W\u003c\/td\u003e\n\u003ctd\u003e960 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning performance\u003c\/th\u003e\n\u003ctd\u003e300 W \/ 5 mJ\u003c\/td\u003e\n\u003ctd\u003e300 W \/ 5 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBest for\u003c\/th\u003e\n\u003ctd\u003eStandard shop outlets, mobile and on-site work\u003c\/td\u003e\n\u003ctd\u003eBays already wired for 240 V equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrice\u003c\/th\u003e\n\u003ctd\u003eUS$8,500\u003c\/td\u003e\n\u003ctd\u003eUS$8,500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eChoose 110 V if you want to plug into a standard U.S. shop outlet or take the cleaner to job sites.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose 220–240 V if your workstation already has a 240 V single-phase circuit and you want the lowest current draw.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the Haotian HT-300\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What can the HT-300 remove?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It removes \u003cstrong\u003erust, oxides, paint, coatings, oil, grease and weld discoloration\u003c\/strong\u003e from steel, stainless steel, aluminum, copper, brass and other metals. It's strongest on precision and moderate-area work; multi-layer paint over very large areas is faster with a higher-power or continuous-wave cleaner.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Will the laser damage the metal underneath?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Not with correct settings. Contaminants absorb far more \u003cstrong\u003e1,064 nm\u003c\/strong\u003e energy than clean metal, and the \u003cstrong\u003enanosecond pulses\u003c\/strong\u003e limit heat input, so the substrate isn't warped, pitted or heat-tinted. That's the core advantage over blasting, wire wheels and continuous-wave lasers on delicate parts.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What's the difference between a pulsed and a continuous-wave laser cleaner?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A \u003cstrong\u003epulsed cleaner\u003c\/strong\u003e like the HT-300 fires short, high-peak-power bursts that remove contaminants with minimal heat, which suits thin, finished and precision parts. A \u003cstrong\u003econtinuous-wave cleaner\u003c\/strong\u003e delivers more raw wattage per dollar and is faster on heavy rust and structural steel, but it puts more heat into the workpiece.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What do 300 W and 5 mJ mean?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e \u003cstrong\u003e300 W\u003c\/strong\u003e is the average output power, which sets how much area the machine can clean per hour. \u003cstrong\u003e5 mJ\u003c\/strong\u003e is the maximum energy in a single pulse, which determines how hard each pulse hits. Together they make the HT-300 well suited to fine, controlled cleaning at a productive pace.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can the HT-300 run on a regular 110 V outlet?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, if you order the \u003cstrong\u003e110 V build\u003c\/strong\u003e. It draws \u003cstrong\u003e960 W, about 9 A\u003c\/strong\u003e, so a standard shop receptacle works; a dedicated 15–20 A circuit keeps other tools from tripping the breaker. A \u003cstrong\u003e220–240 V\u003c\/strong\u003e build drawing 4.5 A is also available.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Does it need a water chiller or compressed air?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No chiller. The HT-300 is \u003cstrong\u003efully air cooled\u003c\/strong\u003e, with no coolant, distilled water or freeze risk. It does need \u003cstrong\u003efiltered, dry compressed air\u003c\/strong\u003e at the cleaning head to keep debris off the protective lens; 3 m of air tubing is included.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety equipment do I need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The HT-300 is a \u003cstrong\u003eClass 4 laser\u003c\/strong\u003e. Everyone in the work area needs \u003cstrong\u003eeyewear rated for 1,064 nm\u003c\/strong\u003e (one OD8+ pair is included), the area should be controlled with barriers or laser curtains, and you should run a \u003cstrong\u003efume extractor\u003c\/strong\u003e, because ablated paint and coatings can be hazardous to breathe.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What does the price include?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eUS$8,500 price\u003c\/strong\u003e includes the machine, scan head, spare lenses, eyewear and accessories listed above, with \u003cstrong\u003edoor-to-door delivered duty paid shipping\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What warranty and support come with the HT-300?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Through The Maker's Chest, the HT-300 carries a \u003cstrong\u003e3-year warranty\u003c\/strong\u003e and \u003cstrong\u003eUSA-based technical support\u003c\/strong\u003e. Consumables such as protective lenses are replaced as part of normal maintenance.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can I return a Haotian machine?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. \u003cstrong\u003eHaotian machines are built to order\u003c\/strong\u003e, and The Maker's Chest \u003cstrong\u003edoes not accept returns\u003c\/strong\u003e on them. That's why we review your parts, contaminants and power supply with you before you order.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why buy the HT-300 from The Maker's Chest?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e You get a \u003cstrong\u003e3-year warranty\u003c\/strong\u003e, \u003cstrong\u003eUSA-based technical support\u003c\/strong\u003e and an application review from a team that sells both pulsed and continuous-wave cleaners and will steer you to the right one. We also supply \u003cstrong\u003euniversities, schools and businesses\u003c\/strong\u003e and can handle purchase orders.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch6 style=\"color: #7f1d1d;\"\u003eHaotian HT-300 Specifications:\u003c\/h6\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHT-300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser output\u003c\/th\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum single-pulse energy\u003c\/th\u003e\n\u003ctd\u003e5 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1,064 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse duration\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate range\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e10–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController\u003c\/th\u003e\n\u003ctd\u003eZBTK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan head\u003c\/th\u003e\n\u003ctd\u003eDual-axis head with dual red aiming guides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCleaning head weight\u003c\/th\u003e\n\u003ctd\u003e800 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput options\u003c\/th\u003e\n\u003ctd\u003e110 V or 220–240 V, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer-listed input current\u003c\/th\u003e\n\u003ctd\u003e9 A at 110 V \/ 4.5 A at 220 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e960 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAir assist\u003c\/th\u003e\n\u003ctd\u003eFiltered, dry compressed air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch5\u003eWarranty\u003c\/h5\u003e\u003cp\u003eThe Haotian HT-300 is covered by a \u003cstrong\u003e3-year warranty\u003c\/strong\u003e when purchased through The Maker's Chest, three times the 1-year term common on imported laser cleaners, and is backed by \u003cstrong\u003eUSA-based technical support\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHaotian machines are built to order\u003c\/strong\u003e, so The Maker's Chest \u003cstrong\u003edoes not accept returns\u003c\/strong\u003e on Haotian equipment. We review your application before you order so the machine you receive is the right one.\u003c\/p\u003e","brand":"Haotian","offers":[{"title":"110 V","offer_id":58368240746662,"sku":null,"price":8500.0,"currency_code":"USD","in_stock":true},{"title":"220–240 V","offer_id":58368240779430,"sku":null,"price":8500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/haotian-ht-300-pulsed-laser-cleaner.jpg?v=1794721521"},{"product_id":"mcwlaser-lg200-200w-pulsed-laser-cleaner","title":"MCWlaser MC-LG200 200W Pulsed Laser Cleaner","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eClean Small Metal Parts With a Compact 200 W Pulsed System\u003c\/span\u003e\u003c\/h2\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe MC-LG200 packs a \u003cstrong\u003e200 W JPT MOPA pulsed fiber source\u003c\/strong\u003e, a \u003cstrong\u003e30,000 mm\/s dual-axis scan head\u003c\/strong\u003e and \u003cstrong\u003e110–240 V plug-in power\u003c\/strong\u003e into a 28 kg air-cooled trolley case.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/R2S8KwlQHvc?si=D9VAtGCR-xzCrZ_L\" title=\"MCWlaser Laser Cleaning Machine Model:MC-LG300\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMCWlaser MC-LG200\u003c\/strong\u003e is the entry model in the MC-LG pulsed series. Its \u003cstrong\u003e200 W JPT MOPA source\u003c\/strong\u003e is worth evaluating for rust, oxidation, or coating removal on small tooling and repair parts where the finish underneath matters.\u003c\/p\u003e\u003cp\u003eA \u003cstrong\u003enon-contact scanning head\u003c\/strong\u003e directs energy at the treatment area, so the process adds no blasting media. Compare the finished sample and total time per part with your current process. Allow for \u003cstrong\u003eextraction and periodic optical service\u003c\/strong\u003e in the station budget.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eEvaluate Coating Removal on Parts With a Finish to Preserve\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g2.jpg?v=1794722536\" alt=\"Trolley case with telescoping handle and equipment storage — MCWlaser MC-LG200\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eJPT MOPA source\u003c\/strong\u003e gives the operator control over pulse duration and repetition rate. Pulsed delivery can help limit the spread of heat compared with continuous exposure. Trial the actual coating and substrate and inspect \u003cstrong\u003esurface texture and appearance\u003c\/strong\u003e before accepting a process for recurring work.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eNine Scan Patterns and Up to 160 mm Width for Edges, Seams and Flats\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g5.jpg?v=1794722536\" alt=\"Illustrated scan shapes offered by the handheld system — MCWlaser MC-LG200\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe dual-axis galvo head sweeps the beam at up to \u003cstrong\u003e30,000 mm\/s\u003c\/strong\u003e in \u003cstrong\u003enine selectable scan patterns\u003c\/strong\u003e — lines, rectangles, circles and fills — so the cleaned area matches the feature in front of you instead of overspraying onto a finished face next to it. With the standard \u003cstrong\u003e254 mm field lens\u003c\/strong\u003e the scan reaches up to \u003cstrong\u003e160 mm wide\u003c\/strong\u003e; optional 160, 210, 330 and 420 mm lenses trade working distance for width, up to 300 mm with the 420 mm lens. A \u003cstrong\u003ered-light aiming guide\u003c\/strong\u003e shows exactly where the pattern will land before the laser fires, which matters when you are cleaning a weld seam next to a part you want left alone.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003ePlan Power for a Compact Cleaning Station\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-b0.jpg?v=1794722535\" alt=\"Several views of the handheld head used at the workpiece — MCWlaser MC-LG200\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eMCWlaser lists \u003cstrong\u003e110–240 V AC, 50\/60 Hz\u003c\/strong\u003e and \u003cstrong\u003eup to 1,500 W of input consumption\u003c\/strong\u003e. The air-cooled design removes a separate coolant system from the station layout. Confirm the supplied plug and circuit with the manufacturer’s documentation and a qualified electrician before choosing an outlet.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eA 1.98 lb Head on a 5 m Lead for Long Handheld Sessions\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g9.jpg?v=1794722537\" alt=\"Open case and cabinet views showing the integrated layout — MCWlaser MC-LG200\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eAt \u003cstrong\u003e1.98 lb\u003c\/strong\u003e, the MC-LG200's handheld head is the lightest in the MC-LG family, and laser cleaning is a hold-it-in-the-air job, so head weight decides how long an operator can work accurately. The \u003cstrong\u003e5 m fiber lead\u003c\/strong\u003e lets the operator walk around a fixture or reach into an engine bay while the 28 kg case stays put on its wheels. When the job moves, the \u003cstrong\u003etelescoping handle and casters\u003c\/strong\u003e roll the whole system to the next station like a piece of luggage.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eTouchscreen Control That Makes Results Repeatable\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g4.jpg?v=1794722535\" alt=\"Touchscreen cleaning menu and adjustment controls — MCWlaser MC-LG200\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003ePower (adjustable in steps across \u003cstrong\u003e0–100%\u003c\/strong\u003e), repetition rate, scan pattern and scan width are all set from the integrated touchscreen, and MCWlaser's interface keeps \u003cstrong\u003ecommon parameter sets\u003c\/strong\u003e ready to recall. Once you have dialed in a recipe for, say, light rust on mild-steel tooling or mill scale on a weld prep, the next operator can pull up the same settings instead of guessing. That consistency is what turns laser cleaning from a demo into a \u003cstrong\u003erepeatable shop process\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eEvaluate Bright Metals on the Actual Part\u003c\/h3\u003e\u003cp\u003eMCWlaser lists \u003cstrong\u003eback-reflection protection for the source\u003c\/strong\u003e. A bright surface can still create hazardous reflections in the work area. Have the station’s laser safety lead evaluate the setup and verify \u003cstrong\u003esurface compatibility\u003c\/strong\u003e on a representative part before using it in production.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eChoose the Power Tier From Your Workload\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003e200 W MC-LG200\u003c\/strong\u003e has the lightest listed head in the series. The \u003cstrong\u003e300 W and 500 W models\u003c\/strong\u003e have higher average output for shops testing larger batches. Compare them using the same part, finish target, and total handling time to find the tier that fits your jobs.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the MC-LG200 Is Built For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMold and die maintenance — evaluating residue removal where cavity finish matters\u003c\/li\u003e\n\u003cli\u003eAutomotive, motorcycle and equipment restoration on small and medium parts\u003c\/li\u003e\n\u003cli\u003ePre-weld and post-weld cleaning on small fabricated assemblies\u003c\/li\u003e\n\u003cli\u003eMachine shops and tool rooms removing rust from fixtures, gauges and stored tooling\u003c\/li\u003e\n\u003cli\u003eUniversity, vocational and research labs teaching or studying surface preparation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g10.png?v=1794722539\" alt=\"Included equipment and accessories by power configuration — MCWlaser MC-LG200\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMCWlaser MC-LG200 trolley-case cleaner with handheld dual-axis scan head and 5 m fiber lead\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed optical service accessories\u003c\/li\u003e\n\u003cli\u003eProtective eyewear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMC-LG200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output power\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse width\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan speed\u003c\/th\u003e\n\u003ctd\u003eUp to 30,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eField lens\u003c\/th\u003e\n\u003ctd\u003e254 mm standard (160 \/ 210 \/ 330 \/ 420 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan width\u003c\/th\u003e\n\u003ctd\u003eUp to 160 mm with 254 mm lens; up to 300 mm with 420 mm lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnti-reflection protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e≤1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head weight\u003c\/th\u003e\n\u003ctd\u003e1.98 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e28 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e617 × 469 × 291 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e−10–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e🔬 \u003cstrong\u003eApplication check before you buy.\u003c\/strong\u003e Send us photos of your parts, the contaminant and the base metal, and we'll tell you whether 200 W pulsed is the right tool or whether you need more power.\u003c\/li\u003e\n\u003cli\u003e⚖️ \u003cstrong\u003ePulsed vs. continuous-wave, answered honestly.\u003c\/strong\u003e We carry MCWlaser's pulsed MC-LG and continuous-wave R and B series, so our recommendation isn't skewed toward one technology.\u003c\/li\u003e\n\u003cli\u003e🔌 \u003cstrong\u003eFacility power review.\u003c\/strong\u003e Ask us for the MC-LG200 electrical details your electrician needs to check before installation.\u003c\/li\u003e\n\u003cli\u003e🧯 \u003cstrong\u003eExtraction planning.\u003c\/strong\u003e Tell us what material and coating you need to remove so we can help you plan extraction for the MC-LG200 work area.\u003c\/li\u003e\n\u003cli\u003e🛡️ \u003cstrong\u003eWarranty terms before you order.\u003c\/strong\u003e Ask us to confirm the manufacturer’s coverage and service process for your configuration.\u003c\/li\u003e\n\u003cli\u003e🏫 \u003cstrong\u003eExperience with institutional buyers.\u003c\/strong\u003e We supply laser equipment to universities, schools and businesses and can help with quotes and purchasing paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the MCWlaser MC-LG Pulsed Cleaners\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG200\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG300\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG500\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRepetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003ctd\u003e1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head\u003c\/th\u003e\n\u003ctd\u003e1.98 lb\u003c\/td\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate smart screen\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e28 kg\u003c\/td\u003e\n\u003ctd\u003e29 kg\u003c\/td\u003e\n\u003ctd\u003e32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eChoose the MC-LG200 if your work is detail-focused — tooling, molds, small parts and weld seams — and you want the lightest head and lowest cost of entry.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose the MC-LG300 or MC-LG500 if you regularly strip paint or heavy rust over larger areas and need more square footage per hour.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the MCWlaser MC-LG200\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What can the MC-LG200 remove?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It removes \u003cstrong\u003erust, oxides, oil, grease, discoloration, thin paint and coatings\u003c\/strong\u003e from steel, stainless steel, aluminum, copper, brass and other metals. Heavier multi-layer paint can be removed too, but more slowly than with a 300 W or 500 W unit.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Will the laser damage the metal underneath?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eMC-LG200 uses pulsed output\u003c\/strong\u003e, which gives a trained operator another way to control heat input on finish-sensitive work. Test the \u003cstrong\u003eactual metal and coating\u003c\/strong\u003e and inspect the result before using the machine for a batch.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What's the difference between a pulsed and a continuous-wave laser cleaner?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A \u003cstrong\u003epulsed cleaner\u003c\/strong\u003e fires short, high-peak-power bursts that ablate contaminants with minimal heat, which suits precision parts, molds and thin material. A \u003cstrong\u003econtinuous-wave cleaner\u003c\/strong\u003e delivers far more raw wattage for less money per watt and is faster on heavy rust and large steel structures, but it puts more heat into the part.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What electrical supply should I confirm?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser lists \u003cstrong\u003e110–240 V AC\u003c\/strong\u003e with input consumption of \u003cstrong\u003eup to 1,500 W\u003c\/strong\u003e. Confirm the supplied plug and circuit requirements before installation.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Does it need a water chiller or compressed air?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No chiller. The MC-LG200 is \u003cstrong\u003efully air cooled\u003c\/strong\u003e, so there's no distilled water, coolant service or freeze risk. Keep the cabinet vents clear and operate within \u003cstrong\u003e5–40 °C\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How wide is the cleaning path?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Up to \u003cstrong\u003e160 mm with the standard 254 mm field lens\u003c\/strong\u003e, adjustable down to a thin line for edges and seams. Optional lenses extend the width up to \u003cstrong\u003e300 mm with the 420 mm lens\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How should I compare the MC-LG power levels?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eMC-LG200 is rated at 200 W average output\u003c\/strong\u003e. Measure \u003cstrong\u003etime per part and finished surface quality\u003c\/strong\u003e on the same coating and substrate when comparing the MC-LG200, MC-LG300, and MC-LG500.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety equipment do I need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Plan a \u003cstrong\u003elaser-controlled work area\u003c\/strong\u003e with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify \u003cstrong\u003ewavelength-rated protection\u003c\/strong\u003e for everyone in the area.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What warranty comes with it?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why buy the MC-LG200 from The Maker's Chest?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We sell \u003cstrong\u003eboth pulsed and continuous-wave cleaners\u003c\/strong\u003e, so we'll steer you to the right technology for your parts. We'll also check your electrical setup and help you add fume extraction and safety gear, and we've supplied laser equipment to \u003cstrong\u003euniversities, schools and businesses\u003c\/strong\u003e.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch6 style=\"color: #7f1d1d;\"\u003eMCWlaser MC-LG200 Specifications:\u003c\/h6\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMC-LG200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output power\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse width\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan speed\u003c\/th\u003e\n\u003ctd\u003eUp to 30,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eField lens\u003c\/th\u003e\n\u003ctd\u003e254 mm standard (160 \/ 210 \/ 330 \/ 420 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan width\u003c\/th\u003e\n\u003ctd\u003eUp to 160 mm with 254 mm lens; up to 300 mm with 420 mm lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnti-reflection protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e≤1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head weight\u003c\/th\u003e\n\u003ctd\u003e1.98 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e28 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e617 × 469 × 291 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e−10–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch5\u003eWarranty\u003c\/h5\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e","brand":"MCWlaser","offers":[{"title":"Default Title","offer_id":58369220903078,"sku":"FCM-MC-LG200","price":9999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g0.jpg?v=1794722536"},{"product_id":"mcwlaser-lg300-300w-pulsed-laser-cleaner","title":"MCWlaser MC-LG300 300W Pulsed Laser Cleaner","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eHandle Detail Work and Repeat Batches With 300 W of Pulsed Output\u003c\/span\u003e\u003c\/h2\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe MC-LG300 pairs a \u003cstrong\u003e300 W JPT MOPA pulsed source\u003c\/strong\u003e with a \u003cstrong\u003edual-screen control system\u003c\/strong\u003e and a 2.2 lb handheld head, so the same machine handles \u003cstrong\u003eprecision detail work and repeat production cleaning\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/h3\u003e\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/R2S8KwlQHvc\" title=\"MCWlaser Laser Cleaning Machine Model MC-LG300\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eMCWlaser MC-LG300\u003c\/strong\u003e fits shops that switch between detailed surface work and repeat batches of brackets, fixtures, or other metal parts. Its \u003cstrong\u003e300 W JPT MOPA source\u003c\/strong\u003e gives it more average output than the MC-LG200.\u003c\/p\u003e\u003cp\u003eA \u003cstrong\u003edual-screen interface\u003c\/strong\u003e and \u003cstrong\u003e29 kg air-cooled trolley\u003c\/strong\u003e define the middle tier of the series. Compare head weight, job access, finish requirements, and time per part when determining whether the 300 W configuration fits your recurring work.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eEvaluate Surface Finish on Thin or Finished Metal\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g2.jpg?v=1794722536\" alt=\"Trolley case with telescoping handle and equipment storage — MCWlaser MC-LG300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eJPT MOPA source\u003c\/strong\u003e offers an adjustable pulse duration and repetition rate. Pulsed delivery can help control heat input when surface finish matters. Test the actual substrate and coating on a representative part, and assess \u003cstrong\u003eappearance, texture, and time per part\u003c\/strong\u003e before committing to a batch.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eDual-Screen Control: Set Parameters at the Case, Watch Them at the Work\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g3.jpg?v=1794722535\" alt=\"Integrated and secondary display controls — MCWlaser MC-LG300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eUnlike the 200 W model, the MC-LG300 adds a \u003cstrong\u003eseparate smart screen\u003c\/strong\u003e alongside the integrated touchscreen. Power, frequency, scan pattern and scan width are adjusted from the menu, with \u003cstrong\u003ecommon parameter sets\u003c\/strong\u003e stored for recall. When several operators share one machine, the recipe for each job lives in the controller rather than in someone's head, so \u003cstrong\u003eresults stay consistent from shift to shift\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eNine Scan Shapes, Up to 160 mm Wide, at 30,000 mm\/s\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g5.jpg?v=1794722536\" alt=\"Illustrated scan shapes offered by the handheld system — MCWlaser MC-LG300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe dual-axis galvo head drives the beam at up to \u003cstrong\u003e30,000 mm\/s\u003c\/strong\u003e through \u003cstrong\u003enine scan patterns\u003c\/strong\u003e. A narrow line cleans a weld seam or a groove; a wide rectangle covers a flat face in fewer passes. The standard \u003cstrong\u003e254 mm field lens\u003c\/strong\u003e gives up to \u003cstrong\u003e160 mm of scan width\u003c\/strong\u003e, and optional lenses from 160 mm to 420 mm let you trade working distance for width, reaching \u003cstrong\u003e300 mm with the 420 mm lens\u003c\/strong\u003e. A \u003cstrong\u003ered aiming light\u003c\/strong\u003e previews the pattern before you fire, so you clean only what you intend to clean.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eAir Cooled and Rolling — Laser Cleaning That Goes to the Job\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-b0.jpg?v=1794722535\" alt=\"Several views of the handheld head used at the workpiece — MCWlaser MC-LG300\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe whole system weighs \u003cstrong\u003e29 kg\u003c\/strong\u003e, just 1 kg more than the 200 W model, and rolls on casters with a \u003cstrong\u003etelescoping handle\u003c\/strong\u003e. Cooling is \u003cstrong\u003eentirely air-based\u003c\/strong\u003e: no water tank, no distilled water, no chiller maintenance and a listed 5–40 °C operating range. Compared with a 2,000 W water-cooled continuous-wave cabinet that weighs over 200 kg, the MC-LG300 can be loaded into a service van and used on a customer's site the same day.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eConfirm the Supply for Your Work Area\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g4.jpg?v=1794722535\" alt=\"Touchscreen cleaning menu and adjustment controls — MCWlaser MC-LG300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eMCWlaser lists \u003cstrong\u003e110–240 V AC, 50\/60 Hz\u003c\/strong\u003e and \u003cstrong\u003eup to 1,500 W of input consumption\u003c\/strong\u003e. Check the supplied connector and circuit requirements before ordering, particularly if extraction or other shop equipment shares the bay.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eGive the Cabinet a Fixed Position Around the Fixture\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g9.jpg?v=1794722537\" alt=\"Open case and cabinet views showing the integrated layout — MCWlaser MC-LG300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e5 m fiber lead\u003c\/strong\u003e offers room to route the head around fixtures. MCWlaser lists \u003cstrong\u003eback-reflection protection for the source\u003c\/strong\u003e. Confirm the useful cable reach around barriers, and have your safety lead review the work area before evaluating polished or reflective parts.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eChoose 300 W for a Mix of Detail and Batch Work\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003e300 W model\u003c\/strong\u003e sits between the 200 W and 500 W units in average output. The \u003cstrong\u003eseparate smart screen\u003c\/strong\u003e is another practical difference from the entry model. Compare the time and finish on your own recurring jobs to decide whether the middle tier or the 500 W offers better value.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the MC-LG300 Is Built For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAutomotive and classic-vehicle restoration — frames, panels, suspension and engine parts\u003c\/li\u003e\n\u003cli\u003eMold, die and tooling maintenance where surface texture must be preserved\u003c\/li\u003e\n\u003cli\u003eFabrication shops cleaning mill scale and oxide before welding and discoloration after\u003c\/li\u003e\n\u003cli\u003eFacility maintenance teams removing rust and paint from equipment in place\u003c\/li\u003e\n\u003cli\u003eUniversity and vocational programs that need one cleaner for varied lab work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g10.png?v=1794722539\" alt=\"Included equipment and accessories by power configuration — MCWlaser MC-LG300\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMCWlaser MC-LG300 trolley-case cleaner with handheld dual-axis scan head and 5 m fiber lead\u003c\/li\u003e\n\u003cli\u003eSeparate smart screen\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed optical service accessories\u003c\/li\u003e\n\u003cli\u003eProtective eyewear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMC-LG300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output power\u003c\/th\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse width\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan speed\u003c\/th\u003e\n\u003ctd\u003eUp to 30,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eField lens\u003c\/th\u003e\n\u003ctd\u003e254 mm standard (160 \/ 210 \/ 330 \/ 420 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan width\u003c\/th\u003e\n\u003ctd\u003eUp to 160 mm with 254 mm lens; up to 300 mm with 420 mm lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eIntegrated touchscreen plus separate smart screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnti-reflection protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e≤1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head weight\u003c\/th\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e29 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e617 × 469 × 291 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e−10–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e🔬 \u003cstrong\u003eRight-sizing before you buy.\u003c\/strong\u003e Tell us what you clean, how often and over how much area, and we'll tell you whether 300 W is the right tier or whether 200 W or 500 W fits your workload better.\u003c\/li\u003e\n\u003cli\u003e⚖️ \u003cstrong\u003ePulsed and continuous-wave under one roof.\u003c\/strong\u003e We carry MCWlaser's MC-LG pulsed and R\/B continuous-wave cleaners, so our advice follows your parts, not a single product line.\u003c\/li\u003e\n\u003cli\u003e🚐 \u003cstrong\u003eSite planning.\u003c\/strong\u003e Review how the trolley, fiber lead, and support equipment fit the controlled work area at each site.\u003c\/li\u003e\n\u003cli\u003e🧯 \u003cstrong\u003eExtraction planning.\u003c\/strong\u003e Tell us what material and coating you need to remove so we can help you plan extraction for the MC-LG300 work area.\u003c\/li\u003e\n\u003cli\u003e🛡️ \u003cstrong\u003eWarranty terms before you order.\u003c\/strong\u003e Ask us to confirm the manufacturer’s coverage and service process for your configuration.\u003c\/li\u003e\n\u003cli\u003e🏫 \u003cstrong\u003eExperience with institutional buyers.\u003c\/strong\u003e We supply laser equipment to universities, schools and businesses and can help with quotes and purchasing paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the MCWlaser MC-LG Pulsed Cleaners\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG200\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG300\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG500\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRepetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003ctd\u003e1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head\u003c\/th\u003e\n\u003ctd\u003e1.98 lb\u003c\/td\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate smart screen\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e28 kg\u003c\/td\u003e\n\u003ctd\u003e29 kg\u003c\/td\u003e\n\u003ctd\u003e32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eChoose the MC-LG300 if your work mixes detail cleaning with regular paint or rust stripping over moderate areas and you want production speed in a portable, plug-in package.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose the MC-LG500 if large-area stripping is a daily job and every hour of labor saved matters.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the MCWlaser MC-LG300\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What can the MC-LG300 clean?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It removes \u003cstrong\u003erust, mill scale, oxides, paint, powder coat, oil, grease and weld discoloration\u003c\/strong\u003e from steel, stainless steel, aluminum, copper, brass and other metals, and handles \u003cstrong\u003elight-to-moderate paint stripping\u003c\/strong\u003e on panels and frames.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How should I compare the MC-LG power levels?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eMC-LG300 is rated at 300 W average output\u003c\/strong\u003e. Measure \u003cstrong\u003etime per part and finished surface quality\u003c\/strong\u003e on the same coating and substrate when comparing the MC-LG200, MC-LG300, and MC-LG500.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Is a pulsed cleaner better than a continuous-wave cleaner?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It depends on the part. \u003cstrong\u003ePulsed\u003c\/strong\u003e cleaners are better for precision, thin material and finishes you need to keep. \u003cstrong\u003eContinuous-wave\u003c\/strong\u003e cleaners deliver more wattage per dollar and are faster on heavy rust and structural steel, but they put more heat into the workpiece.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What electrical supply should I confirm?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser lists \u003cstrong\u003e110–240 V AC\u003c\/strong\u003e with input consumption of \u003cstrong\u003eup to 1,500 W\u003c\/strong\u003e. Confirm the supplied plug and circuit requirements before installation.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Does it need water cooling?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. The MC-LG300 is \u003cstrong\u003efully air cooled\u003c\/strong\u003e, with no chiller, coolant or distilled water to maintain.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Will it damage aluminum or stainless steel?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eMC-LG300 uses pulsed output\u003c\/strong\u003e, which gives a trained operator another way to control heat input on finish-sensitive work. Test the \u003cstrong\u003eactual metal and coating\u003c\/strong\u003e and inspect the result before using the machine for a batch.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How wide is the cleaning path?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Up to \u003cstrong\u003e160 mm with the standard 254 mm lens\u003c\/strong\u003e. Optional lenses go up to \u003cstrong\u003e300 mm with a 420 mm field lens\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety equipment do I need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Plan a \u003cstrong\u003elaser-controlled work area\u003c\/strong\u003e with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify \u003cstrong\u003ewavelength-rated protection\u003c\/strong\u003e for everyone in the area.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What warranty is included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why buy the MC-LG300 from The Maker's Chest?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We stock \u003cstrong\u003epulsed and continuous-wave cleaners\u003c\/strong\u003e and will match the power level to your actual workload. We'll also help you plan electrical, fume extraction and safety gear, drawing on experience supplying \u003cstrong\u003euniversities, schools and businesses\u003c\/strong\u003e.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch6 style=\"color: #7f1d1d;\"\u003eMCWlaser MC-LG300 Specifications:\u003c\/h6\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMC-LG300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output power\u003c\/th\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse width\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan speed\u003c\/th\u003e\n\u003ctd\u003eUp to 30,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eField lens\u003c\/th\u003e\n\u003ctd\u003e254 mm standard (160 \/ 210 \/ 330 \/ 420 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan width\u003c\/th\u003e\n\u003ctd\u003eUp to 160 mm with 254 mm lens; up to 300 mm with 420 mm lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eIntegrated touchscreen plus separate smart screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnti-reflection protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e≤1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head weight\u003c\/th\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e29 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e617 × 469 × 291 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e−10–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch5\u003eWarranty\u003c\/h5\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e","brand":"MCWlaser","offers":[{"title":"Default Title","offer_id":58369222344870,"sku":"FCM-MC-LG300","price":14399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g0.jpg?v=1794722536"},{"product_id":"mcwlaser-lg500-500w-pulsed-laser-cleaner","title":"MCWlaser MC-LG500 500W Pulsed Laser Cleaner","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eEvaluate Larger Cleaning Batches With 500 W of Pulsed Output\u003c\/span\u003e\u003c\/h2\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe MC-LG500 is the flagship of MCWlaser's pulsed range: a \u003cstrong\u003e500 W JPT MOPA source\u003c\/strong\u003e, the series' widest \u003cstrong\u003e1–4,000 kHz repetition range\u003c\/strong\u003e and dual-screen control, all in a \u003cstrong\u003e32 kg trolley case\u003c\/strong\u003e that runs on 110–240 V.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/R2S8KwlQHvc?si=D9VAtGCR-xzCrZ_L\" title=\"MCWlaser Laser Cleaning Machine Model:MC-LG300\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMCWlaser MC-LG500\u003c\/strong\u003e is the highest-output model in the series. Its \u003cstrong\u003e500 W JPT MOPA source\u003c\/strong\u003e is a candidate for shops cleaning recurring batches of metal parts or larger coated surfaces.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eair-cooled trolley cabinet\u003c\/strong\u003e uses the same basic form factor as the lower tiers, and the \u003cstrong\u003eseparate smart screen\u003c\/strong\u003e gives operators an additional interface. Trial your toughest recurring part and compare total preparation and handling time against the 200 W and 300 W models.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eTrial a Higher-Output Pulsed Cleaner for Recurring Jobs\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g2.jpg?v=1794722536\" alt=\"Trolley case with telescoping handle and equipment storage — MCWlaser MC-LG500\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e500 W nominal average output\u003c\/strong\u003e gives the MC-LG500 more available output than the other LG models. Its \u003cstrong\u003epulsed source\u003c\/strong\u003e helps an operator manage heat input on finish-sensitive work. A timed sample gives you a basis for estimating the labor involved in cleaning and handling each part.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare Finish Across a Wider Listed Frequency Range\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g3.jpg?v=1794722535\" alt=\"Integrated and secondary display controls — MCWlaser MC-LG500\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MC-LG500 has a \u003cstrong\u003e1–4,000 kHz published repetition range\u003c\/strong\u003e, compared with \u003cstrong\u003e1–3,000 kHz on the 200 W and 300 W models\u003c\/strong\u003e. Frequency describes how often pulses are delivered. Use the finished sample to judge how the wider adjustment range serves the particular coating and substrate.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eNine Scan Patterns, Up to 300 mm Wide With Optional Lenses\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g5.jpg?v=1794722536\" alt=\"Illustrated scan shapes offered by the handheld system — MCWlaser MC-LG500\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe dual-axis scan head offers \u003cstrong\u003enine patterns\u003c\/strong\u003e, from a single line for seams and edges to wide fills for flat panels, with a \u003cstrong\u003ered aiming guide\u003c\/strong\u003e to preview placement. The standard \u003cstrong\u003e254 mm field lens\u003c\/strong\u003e provides up to \u003cstrong\u003e160 mm of scan width\u003c\/strong\u003e. Because the MC-LG500 has the power to drive a wider pattern at useful energy density, it is the best candidate in the series for the optional \u003cstrong\u003e330 mm or 420 mm lenses\u003c\/strong\u003e, which extend the scan up to \u003cstrong\u003e300 mm wide\u003c\/strong\u003e for large flat areas.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eDual-Screen Control and Stored Parameter Sets\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g4.jpg?v=1794722535\" alt=\"Touchscreen cleaning menu and adjustment controls — MCWlaser MC-LG500\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe MC-LG500 pairs its integrated touchscreen with a \u003cstrong\u003eseparate smart screen\u003c\/strong\u003e. Power, frequency, pulse settings, scan pattern and width are set from the menu, and \u003cstrong\u003ecommon parameter sets\u003c\/strong\u003e can be recalled for repeat work. In a production setting, a supervisor can lock in a validated recipe for each part number, so every operator removes the same coating to the same standard with \u003cstrong\u003eless dependence on individual skill\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFit the Highest-Power LG Model Into a Rolling Cabinet\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-b0.jpg?v=1794722535\" alt=\"Several views of the handheld head used at the workpiece — MCWlaser MC-LG500\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e32 kg trolley\u003c\/strong\u003e weighs 4 kg more than the MC-LG200. MCWlaser lists \u003cstrong\u003e110–240 V AC and up to 1,500 W input consumption\u003c\/strong\u003e. Confirm the delivered unit’s connector and circuit requirements, and plan its placement within the listed operating temperature range and the controlled work area.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCheck Cable Reach and Finish on Mixed-Metal Jobs\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g9.jpg?v=1794722537\" alt=\"Open case and cabinet views showing the integrated layout — MCWlaser MC-LG500\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e5 m fiber lead and 2.2 lb head\u003c\/strong\u003e describe the hardware an operator will handle around a fixture. MCWlaser lists \u003cstrong\u003eback-reflection protection for the source\u003c\/strong\u003e. Use the actual layout to determine reach and have the safety lead assess reflection risks for any polished workpieces.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhen the MC-LG500 Is Worth the Step Up\u003c\/h3\u003e\u003cp\u003eChoose 500 W when \u003cstrong\u003elabor time is the biggest cost in your cleaning process\u003c\/strong\u003e. That means paint stripping on vehicles, trailers and equipment, de-scaling batches of fabricated parts, or cleaning large mold and die surfaces on a schedule. If your work is mostly localized detail cleaning, the MC-LG200 or MC-LG300 will do it for less. If you're cleaning \u003cstrong\u003eheavy rust on structural steel\u003c\/strong\u003e where some heat input doesn't matter, a continuous-wave cleaner such as MCWlaser's R or B series delivers more raw wattage per dollar.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the MC-LG500 Is Built For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCollision, restoration and refinishing shops stripping paint from bodies, frames and panels\u003c\/li\u003e\n\u003cli\u003eFabricators removing mill scale and oxide from production batches before welding or coating\u003c\/li\u003e\n\u003cli\u003eMold and die shops evaluating residue removal where cavity finish matters\u003c\/li\u003e\n\u003cli\u003eAerospace, marine and rail maintenance teams removing coatings from aluminum and alloy parts\u003c\/li\u003e\n\u003cli\u003eContract cleaning and mobile service businesses that bill by the hour on customer sites\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g10.png?v=1794722539\" alt=\"Included equipment and accessories by power configuration — MCWlaser MC-LG500\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMCWlaser MC-LG500 trolley-case cleaner with handheld dual-axis scan head and 5 m fiber lead\u003c\/li\u003e\n\u003cli\u003eSeparate smart screen\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed optical service accessories\u003c\/li\u003e\n\u003cli\u003eProtective eyewear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMC-LG500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output power\u003c\/th\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse width\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate\u003c\/th\u003e\n\u003ctd\u003e1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan speed\u003c\/th\u003e\n\u003ctd\u003eUp to 30,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eField lens\u003c\/th\u003e\n\u003ctd\u003e254 mm standard (160 \/ 210 \/ 330 \/ 420 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan width\u003c\/th\u003e\n\u003ctd\u003eUp to 160 mm with 254 mm lens; up to 300 mm with 420 mm lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eIntegrated touchscreen plus separate smart screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnti-reflection protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e≤1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head weight\u003c\/th\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e617 × 469 × 291 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e−10–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e📈 \u003cstrong\u003eThroughput math before you buy.\u003c\/strong\u003e Share the parts, coating and weekly volume, and we'll help you weigh the MC-LG500 against the 300 W model and continuous-wave alternatives on labor hours saved.\u003c\/li\u003e\n\u003cli\u003e⚖️ \u003cstrong\u003ePulsed and continuous-wave expertise.\u003c\/strong\u003e We carry MCWlaser's MC-LG pulsed and R\/B continuous-wave cleaners, so we'll tell you honestly when 500 W pulsed is worth the premium and when it isn't.\u003c\/li\u003e\n\u003cli\u003e🔭 \u003cstrong\u003eLens selection guidance.\u003c\/strong\u003e We'll help you decide whether an optional 330 mm or 420 mm field lens makes sense for the panel sizes you clean.\u003c\/li\u003e\n\u003cli\u003e🧯 \u003cstrong\u003eExtraction planning.\u003c\/strong\u003e Tell us what material and coating you need to remove so we can help you plan extraction for the MC-LG500 work area.\u003c\/li\u003e\n\u003cli\u003e🛡️ \u003cstrong\u003eWarranty terms before you order.\u003c\/strong\u003e Ask us to confirm the manufacturer’s coverage and service process for your configuration.\u003c\/li\u003e\n\u003cli\u003e🏫 \u003cstrong\u003eExperience with institutional buyers.\u003c\/strong\u003e We supply laser equipment to universities, schools and businesses and can help with quotes, POs and purchasing paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the MCWlaser MC-LG Pulsed Cleaners\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG200\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG300\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMC-LG500\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output\u003c\/th\u003e\n\u003ctd\u003e200 W\u003c\/td\u003e\n\u003ctd\u003e300 W\u003c\/td\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRepetition rate\u003c\/th\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003ctd\u003e1–3,000 kHz\u003c\/td\u003e\n\u003ctd\u003e1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head\u003c\/th\u003e\n\u003ctd\u003e1.98 lb\u003c\/td\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSeparate smart screen\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e28 kg\u003c\/td\u003e\n\u003ctd\u003e29 kg\u003c\/td\u003e\n\u003ctd\u003e32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003ctd\u003e110–240 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eChoose the MC-LG500 if repeat batches justify testing the highest-output model in the air-cooled LG series.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose the MC-LG300 if your workload mixes detail cleaning with occasional larger jobs and you want to keep the investment lower.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the MCWlaser MC-LG500\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What can the MC-LG500 remove?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e \u003cstrong\u003ePaint, powder coat, rust, mill scale, oxides, oil, grease, carbon deposits and weld discoloration\u003c\/strong\u003e from steel, stainless steel, aluminum, copper, brass and alloys. Its 500 W output makes it the best MC-LG model for multi-layer paint and larger surface areas.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How should I compare the MC-LG power levels?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eMC-LG500 is rated at 500 W average output\u003c\/strong\u003e. Measure \u003cstrong\u003etime per part and finished surface quality\u003c\/strong\u003e on the same coating and substrate when comparing the MC-LG200, MC-LG300, and MC-LG500.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why choose a 500 W pulsed cleaner over a 1,500 W continuous-wave cleaner?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003eMC-LG500 uses pulsed output\u003c\/strong\u003e, which gives a trained operator another way to control heat input on finish-sensitive work. Test the \u003cstrong\u003eactual metal and coating\u003c\/strong\u003e and inspect the result before using the machine for a batch.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What electrical supply should I confirm?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser lists \u003cstrong\u003e110–240 V AC\u003c\/strong\u003e with input consumption of \u003cstrong\u003eup to 1,500 W\u003c\/strong\u003e. Confirm the supplied plug and circuit requirements before installation.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Does it need a chiller?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. The MC-LG500 is \u003cstrong\u003efully air cooled\u003c\/strong\u003e. Keep the vents clear and operate within \u003cstrong\u003e5–40 °C\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What does the 4,000 kHz repetition rate do?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The \u003cstrong\u003e1–4,000 kHz listed range\u003c\/strong\u003e describes the frequencies at which the source can deliver pulses. Use a \u003cstrong\u003erepresentative sample\u003c\/strong\u003e to assess the finished surface and total time for your application.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How wide can it clean in one pass?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Up to \u003cstrong\u003e160 mm with the standard 254 mm lens\u003c\/strong\u003e, or up to \u003cstrong\u003e300 mm with the optional 420 mm lens\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety equipment is required?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Plan a \u003cstrong\u003elaser-controlled work area\u003c\/strong\u003e with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify \u003cstrong\u003ewavelength-rated protection\u003c\/strong\u003e for everyone in the area.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What warranty is included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why buy the MC-LG500 from The Maker's Chest?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We sell \u003cstrong\u003epulsed and continuous-wave cleaners\u003c\/strong\u003e and will help you confirm that 500 W is justified by your volume before you spend the money. We also help with lens choice, fume extraction and purchasing for \u003cstrong\u003euniversities, schools and businesses\u003c\/strong\u003e.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch6 style=\"color: #7f1d1d;\"\u003eMCWlaser MC-LG500 Specifications:\u003c\/h6\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eMC-LG500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAverage output power\u003c\/th\u003e\n\u003ctd\u003e500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eJPT MOPA pulsed fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse width\u003c\/th\u003e\n\u003ctd\u003e13–500 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePulse repetition rate\u003c\/th\u003e\n\u003ctd\u003e1–4,000 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower adjustment\u003c\/th\u003e\n\u003ctd\u003e0–100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan speed\u003c\/th\u003e\n\u003ctd\u003eUp to 30,000 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan patterns\u003c\/th\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eField lens\u003c\/th\u003e\n\u003ctd\u003e254 mm standard (160 \/ 210 \/ 330 \/ 420 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan width\u003c\/th\u003e\n\u003ctd\u003eUp to 160 mm with 254 mm lens; up to 300 mm with 420 mm lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eIntegrated touchscreen plus separate smart screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnti-reflection protection\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput voltage\u003c\/th\u003e\n\u003ctd\u003e110–240 V AC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e≤1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandheld head weight\u003c\/th\u003e\n\u003ctd\u003e2.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e617 × 469 × 291 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e5–40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage temperature\u003c\/th\u003e\n\u003ctd\u003e−10–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch5\u003eWarranty\u003c\/h5\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e","brand":"MCWlaser","offers":[{"title":"Default Title","offer_id":58369223262374,"sku":"FCM-MC-LG500","price":17999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-0-g0.jpg?v=1794722536"},{"product_id":"mcwlaser-r1500a-1500w-air-cooled-laser-cleaner","title":"MCWlaser R1500A 1500W Air-Cooled CW Laser Cleaner","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eBring Continuous-Wave Cleaning to a Bay With Limited Floor Space\u003c\/span\u003e\u003c\/h2\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe R1500A pairs a \u003cstrong\u003e1,500 W Raycus continuous-wave fiber source\u003c\/strong\u003e with \u003cstrong\u003eintegrated air cooling\u003c\/strong\u003e, a \u003cstrong\u003e10 m fiber lead\u003c\/strong\u003e and touchscreen control in a compact 697 × 360 × 532 mm cabinet.\u003c\/em\u003e\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003e1,500 W MCWlaser R1500A\u003c\/strong\u003e is an air-cooled cleaner for evaluating rust, mill scale, or coating removal on robust steel. Its \u003cstrong\u003eRaycus continuous-wave source\u003c\/strong\u003e suits a different set of jobs from the smaller pulsed LG series.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eintegrated air cooling\u003c\/strong\u003e keeps coolant service out of the station plan. Compare the cabinet, required utilities, and \u003cstrong\u003e10 m fiber lead\u003c\/strong\u003e against the work area before deciding whether the R1500A or a water-cooled B Series machine is the better fit.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003ePrepare Steel Assemblies With Continuous Output\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-g2.jpg?v=1794722536\" alt=\"Handheld cleaning head and metal prep examples — MCWlaser R1500A\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e1,500 W Raycus source\u003c\/strong\u003e delivers continuous-wave energy for \u003cstrong\u003enon-contact steel preparation\u003c\/strong\u003e. Consider it for frames, fixtures, and parts that already move through a repeat cleaning bay. Trial the actual contamination and finish target to establish the removal rate and acceptable heat effects.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eAir Cooling Means No Chiller to Fill, Service or Winterize\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-g6.jpg?v=1794722536\" alt=\"Air cooling arrangement inside the cabinet — MCWlaser R1500A\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eMost 1,500 W cleaners rely on a water chiller loop. That means distilled water, coolant changes, freeze risk in an unheated building and a second large box beside the machine. The R1500A uses an \u003cstrong\u003eintegrated air-cooling system\u003c\/strong\u003e with \u003cstrong\u003eupgraded cooling and exhaust paths\u003c\/strong\u003e instead, so there is no coolant to manage and nothing to drain. The cabinet only needs clear airflow around its vents and an ambient temperature within \u003cstrong\u003e0–38 °C\u003c\/strong\u003e. For shops that don't want to become chiller technicians, that's the single biggest operating-cost difference.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eA Compact Cabinet That Fits Where Water-Cooled Units Don't\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-b1.jpg?v=1794722535\" alt=\"Scan-head and example workpieces — MCWlaser R1500A\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eAt \u003cstrong\u003e697 × 360 × 532 mm\u003c\/strong\u003e, the R1500A's cabinet is a fraction of the size of a typical water-cooled 1,500–2,000 W cleaner. MCWlaser's own water-cooled B2000, for example, measures about 115 × 70 × 115 cm and weighs 210 kg. The smaller footprint makes the R1500A practical to roll between bays, park beside a weld cell or load for an on-site job without dedicating a corner of the shop to a cleaning station.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e10 m of Fiber Reach Around Large Assemblies\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-b2.jpg?v=1794722535\" alt=\"Operator using the touchscreen panel — MCWlaser R1500A\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e10 m fiber lead\u003c\/strong\u003e is twice the length found on most portable pulsed cleaners, and MCWlaser lists it as customizable. With that reach the operator can work around a trailer frame, the far side of a large weldment or up a ladder on fixed equipment while the cabinet stays parked. That means fewer cabinet moves, fewer stops and less time spent managing cable instead of cleaning.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eTouchscreen Control With Live Feedback\u003c\/h3\u003e\u003cp\u003eMCWlaser's \u003cstrong\u003esmart touchscreen\u003c\/strong\u003e sets laser power and cleaning mode and shows \u003cstrong\u003elive operating data\u003c\/strong\u003e while you work. The source runs in \u003cstrong\u003econtinuous or modulated mode\u003c\/strong\u003e. Modulation pulses the CW beam on and off, which reduces average heat input on lighter or thinner work while keeping the speed advantage of a CW source. Being able to see and repeat the settings that worked on the last job makes results consistent between operators and shifts.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCheck the Shop Supply Before Ordering\u003c\/h3\u003e\u003cp\u003eMCWlaser lists \u003cstrong\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/strong\u003e for the R Series. Have a qualified electrician check the \u003cstrong\u003edelivered nameplate and connection\u003c\/strong\u003e rather than relying on the rating of a nearby welder outlet. Include electrical capacity for the extraction system in your station plan.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the R Series on Your Recurring Jobs\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eR1500A has 1,500 W of rated output\u003c\/strong\u003e and the \u003cstrong\u003eR2000A has 2,000 W\u003c\/strong\u003e. Both list integrated air cooling and a 10 m standard lead. A trial on the same steel part can show whether the extra output justifies the step up in purchase price.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the R1500A Is Built For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFabrication and welding shops cleaning mill scale and rust before welding or painting\u003c\/li\u003e\n\u003cli\u003eTrailer, truck and heavy-equipment repair shops removing rust and paint from frames and components\u003c\/li\u003e\n\u003cli\u003eFacility and plant maintenance teams cleaning structural steel, tanks and machinery in place\u003c\/li\u003e\n\u003cli\u003eRestoration businesses stripping heavy rust from cast and thick-section parts\u003c\/li\u003e\n\u003cli\u003eShops that want CW cleaning speed but have no space or appetite for a water chiller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMCWlaser R1500A air-cooled cabinet with Raycus 1,500 W source and touchscreen\u003c\/li\u003e\n\u003cli\u003eHandheld cleaning head with 10 m fiber lead\u003c\/li\u003e\n\u003cli\u003eManufacturer's operating manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR1500A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus continuous-wave fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking mode\u003c\/th\u003e\n\u003ctd\u003eContinuous or modulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1,080 ± 10 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eIntegrated air cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput power\u003c\/th\u003e\n\u003ctd\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e10 m standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eTouchscreen with power, mode and live data display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplicable materials\u003c\/th\u003e\n\u003ctd\u003eCarbon steel, stainless steel, galvanized sheet and other metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0–38 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e⚖️ \u003cstrong\u003eCW or pulsed? We'll tell you straight.\u003c\/strong\u003e We carry MCWlaser's continuous-wave R and B series and the pulsed MC-LG series, so we can match the technology to your parts — and steer you away from CW if your work is thin or finished.\u003c\/li\u003e\n\u003cli\u003e🔬 \u003cstrong\u003eApplication check.\u003c\/strong\u003e Send photos of the steel, the contaminant and the finish you need, and we'll tell you whether 1,500 W is enough or whether the R2000A makes more sense.\u003c\/li\u003e\n\u003cli\u003e🔌 \u003cstrong\u003eFacility power review.\u003c\/strong\u003e Ask us for the R1500A electrical details your electrician needs to check before installation.\u003c\/li\u003e\n\u003cli\u003e🧯 \u003cstrong\u003eExtraction planning.\u003c\/strong\u003e Tell us what material and coating you need to remove so we can help you plan extraction for the R1500A work area.\u003c\/li\u003e\n\u003cli\u003e🛡️ \u003cstrong\u003eWarranty terms before you order.\u003c\/strong\u003e Ask us to confirm the manufacturer’s coverage and service process for your configuration.\u003c\/li\u003e\n\u003cli\u003e🏫 \u003cstrong\u003eExperience with institutional buyers.\u003c\/strong\u003e We supply laser equipment to universities, schools and businesses and can help with quotes and purchasing paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the MCWlaser R Series\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eR1500A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eR2000A\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\u003ctd\u003e2,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus CW fiber\u003c\/td\u003e\n\u003ctd\u003eRaycus CW fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput power\u003c\/th\u003e\n\u003ctd\u003e220 V, 16 A\u003c\/td\u003e\n\u003ctd\u003e220 V, 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet dimensions\u003c\/th\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eChoose the R1500A if you clean rust, scale and paint on steel regularly and want CW speed without a chiller at the lower price point.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose the R2000A if heavy coatings or large areas are your bottleneck and the extra 500 W will save meaningful labor time.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the MCWlaser R1500A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What can the R1500A remove?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e \u003cstrong\u003eRust, mill scale, paint, oxides, oil and other coatings\u003c\/strong\u003e from carbon steel, stainless steel, galvanized sheet and other metals. It is strongest on heavy contamination over large steel surfaces.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What's the difference between continuous-wave and pulsed laser cleaning?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e A \u003cstrong\u003econtinuous-wave\u003c\/strong\u003e cleaner delivers a steady, high-wattage beam that removes heavy rust and paint quickly but puts more heat into the part. A \u003cstrong\u003epulsed\u003c\/strong\u003e cleaner fires short bursts that protect thin or finished surfaces but clears area more slowly per dollar. CW is the better value for structural and heavy-section steel.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Does the R1500A need a water chiller?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. It is \u003cstrong\u003eair cooled\u003c\/strong\u003e, with no water tank, distilled water or chiller maintenance. Keep the vents clear and run it within \u003cstrong\u003e0–38 °C\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What electrical service does it need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser lists \u003cstrong\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/strong\u003e for the R Series. Have a qualified electrician verify the \u003cstrong\u003edelivered nameplate and connection requirements\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can I use it on thin sheet metal or aluminum?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e For \u003cstrong\u003ethin or finished metal\u003c\/strong\u003e, compare a pulsed model on a sample of the actual work. Continuous-wave cleaning can transfer more heat into the part. Inspect the \u003cstrong\u003efinish and part condition\u003c\/strong\u003e before approving it for production.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How long is the fiber lead?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e \u003cstrong\u003e10 m standard\u003c\/strong\u003e, twice the length of most portable pulsed units, so the operator can reach around large assemblies without moving the cabinet.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How does the R1500A compare with the R2000A?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Same cabinet, cooling, 10 m lead and 220 V supply. The \u003cstrong\u003eR2000A adds 500 W\u003c\/strong\u003e of source power for roughly a third more removal rate on heavy coatings.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety equipment do I need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Plan a \u003cstrong\u003elaser-controlled work area\u003c\/strong\u003e with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify \u003cstrong\u003ewavelength-rated protection\u003c\/strong\u003e for everyone in the area.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What warranty is included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why buy the R1500A from The Maker's Chest?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We sell \u003cstrong\u003eboth CW and pulsed cleaners\u003c\/strong\u003e, so we'll confirm CW is right for your parts before you buy. We'll also help with your 220 V circuit, fume extraction and purchasing, with experience supplying \u003cstrong\u003euniversities, schools and businesses\u003c\/strong\u003e.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch6 style=\"color: #7f1d1d;\"\u003eMCWlaser R1500A Specifications:\u003c\/h6\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR1500A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus continuous-wave fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking mode\u003c\/th\u003e\n\u003ctd\u003eContinuous or modulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1,080 ± 10 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eIntegrated air cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput power\u003c\/th\u003e\n\u003ctd\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e10 m standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eTouchscreen with power, mode and live data display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplicable materials\u003c\/th\u003e\n\u003ctd\u003eCarbon steel, stainless steel, galvanized sheet and other metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0–38 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch5\u003eWarranty\u003c\/h5\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e","brand":"MCWlaser","offers":[{"title":"Default Title","offer_id":58369228046502,"sku":"FCM-LX-R1500A","price":8599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-g0.png?v=1794722535"},{"product_id":"mcwlaser-r2000a-2000w-air-cooled-laser-cleaner","title":"MCWlaser R2000A 2000W Air-Cooled CW Laser Cleaner","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eSet Up a 2,000 W Steel Cleaning Station With Integrated Air Cooling\u003c\/span\u003e\u003c\/h2\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe R2000A puts a \u003cstrong\u003e2,000 W Raycus continuous-wave fiber source\u003c\/strong\u003e in a compact, \u003cstrong\u003efully air-cooled cabinet\u003c\/strong\u003e with a \u003cstrong\u003e10 m fiber lead\u003c\/strong\u003e — the most power MCWlaser offers without a water loop.\u003c\/em\u003e\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003eMCWlaser R2000A\u003c\/strong\u003e pairs a \u003cstrong\u003e2,000 W Raycus continuous-wave source\u003c\/strong\u003e with an air-cooled cabinet for shops evaluating repeated steel cleaning.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e697 × 360 × 532 mm cabinet\u003c\/strong\u003e and \u003cstrong\u003e10 m standard fiber lead\u003c\/strong\u003e give you a starting point for planning the station. Compare that layout with the water-cooled B2000 if you are choosing between two machines with the same rated output.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eEvaluate Repeat Rust and Scale Removal on Steel\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-g2.jpg?v=1794722536\" alt=\"Handheld cleaning head and metal prep examples — MCWlaser R2000A\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e2,000 W Raycus source\u003c\/strong\u003e supplies \u003cstrong\u003econtinuous-wave output\u003c\/strong\u003e for jobs such as surface preparation on steel frames and equipment. The R1500A provides a lower-output comparison in the same cabinet family. Use a representative part to check the cleaned finish and total time against your existing process.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eKeep Coolant Service Out of the Station Plan\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-g6.jpg?v=1794722536\" alt=\"Air cooling arrangement inside the cabinet — MCWlaser R2000A\" style=\"display: block; width: 100%; max-width: 480px; height: auto; margin: 0 auto 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe R2000A uses \u003cstrong\u003eintegrated air cooling\u003c\/strong\u003e, while the \u003cstrong\u003eB2000 uses a water-based cooling loop\u003c\/strong\u003e. That changes the maintenance and space requirements even though both machines are rated at 2,000 W. Check the specified ambient range and provide the required ventilation and service clearance.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eA 10 m Lead for Trailers, Frames and Fixed Equipment\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-b2.jpg?v=1794722535\" alt=\"Operator using the touchscreen panel — MCWlaser R2000A\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003e10 m fiber lead\u003c\/strong\u003e, customizable per MCWlaser, lets an operator walk the length of a trailer frame, circle a large weldment or work on installed equipment while the cabinet stays in one place. On large jobs, cabinet repositioning and cable management are hidden labor costs. Twice the reach of a typical 5 m portable unit means more of the shift is spent actually cleaning.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eContinuous or Modulated Output From One Touchscreen\u003c\/h3\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-b1.jpg?v=1794722535\" alt=\"Scan-head and example workpieces — MCWlaser R2000A\" style=\"margin-bottom: 16px;\"\u003e\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003esmart touchscreen\u003c\/strong\u003e sets laser power and cleaning mode and displays \u003cstrong\u003elive operating data\u003c\/strong\u003e. Run the source in \u003cstrong\u003econtinuous mode\u003c\/strong\u003e for maximum removal on heavy contamination, or switch to \u003cstrong\u003emodulated mode\u003c\/strong\u003e, which pulses the CW beam, to cut average heat input on lighter coatings or thinner sections. Having both modes on one machine stretches the R2000A's useful range beyond pure heavy-duty stripping.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eConfirm Electrical Fit Before Installing the Cabinet\u003c\/h3\u003e\u003cp\u003eMCWlaser rates the R Series for \u003cstrong\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/strong\u003e. Have a qualified electrician check the \u003cstrong\u003edelivered nameplate and connection\u003c\/strong\u003e before assigning a circuit. A station plan should account for the extractor and any other equipment operating in the bay.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the Two Power Levels in the Same Cabinet Size\u003c\/h3\u003e\u003cp\u003eThe \u003cstrong\u003e2,000 W R2000A\u003c\/strong\u003e shares the listed \u003cstrong\u003e697 × 360 × 532 mm cabinet size\u003c\/strong\u003e with the 1,500 W R1500A. Compare both models on the same part and finish criterion. The useful throughput depends on the work and handling time, so test the job that drives your purchase.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWho the R2000A Is Built For\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStructural steel fabricators cleaning mill scale and rust from beams, plate and weldments\u003c\/li\u003e\n\u003cli\u003eTrailer, truck, rail and heavy-equipment shops stripping rust and paint from frames\u003c\/li\u003e\n\u003cli\u003ePlant and facility maintenance teams cleaning tanks, machinery and steel structures in place\u003c\/li\u003e\n\u003cli\u003eContract surface-prep businesses replacing abrasive blasting on steel work\u003c\/li\u003e\n\u003cli\u003eShops that need maximum CW power but don't want to run or maintain a water chiller\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWhat's in the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMCWlaser R2000A air-cooled cabinet with Raycus 2,000 W source and touchscreen\u003c\/li\u003e\n\u003cli\u003eHandheld cleaning head with 10 m fiber lead\u003c\/li\u003e\n\u003cli\u003eManufacturer's operating manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR2000A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e2,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus continuous-wave fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking mode\u003c\/th\u003e\n\u003ctd\u003eContinuous or modulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1,080 ± 10 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eIntegrated air cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput power\u003c\/th\u003e\n\u003ctd\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e10 m standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eTouchscreen with power, mode and live data display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplicable materials\u003c\/th\u003e\n\u003ctd\u003eCarbon steel, stainless steel, galvanized sheet and other metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0–38 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eThe Maker's Chest Difference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e⚖️ \u003cstrong\u003eHonest CW-vs-pulsed advice.\u003c\/strong\u003e We sell MCWlaser's continuous-wave R and B series and the pulsed MC-LG series, so we'll confirm CW is right for your parts before you invest.\u003c\/li\u003e\n\u003cli\u003e❄️ \u003cstrong\u003eAir-cooled vs. water-cooled, compared for your site.\u003c\/strong\u003e We'll help you weigh the R2000A against the water-cooled B2000 on footprint, maintenance, climate and duty cycle.\u003c\/li\u003e\n\u003cli\u003e🔌 \u003cstrong\u003eFacility power review.\u003c\/strong\u003e Ask us for the R2000A electrical details your electrician needs to check before installation.\u003c\/li\u003e\n\u003cli\u003e🧯 \u003cstrong\u003eExtraction planning.\u003c\/strong\u003e Tell us what material and coating you need to remove so we can help you plan extraction for the R2000A work area.\u003c\/li\u003e\n\u003cli\u003e🛡️ \u003cstrong\u003eWarranty terms before you order.\u003c\/strong\u003e Ask us to confirm the manufacturer’s coverage and service process for your configuration.\u003c\/li\u003e\n\u003cli\u003e🏫 \u003cstrong\u003eExperience with institutional buyers.\u003c\/strong\u003e We supply laser equipment to universities, schools and businesses and can help with quotes and purchasing paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eCompare the MCWlaser R Series\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAttribute\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eR1500A\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eR2000A\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e1,500 W\u003c\/td\u003e\n\u003ctd\u003e2,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus CW fiber\u003c\/td\u003e\n\u003ctd\u003eRaycus CW fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003ctd\u003eAir cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput power\u003c\/th\u003e\n\u003ctd\u003e220 V, 16 A\u003c\/td\u003e\n\u003ctd\u003e220 V, 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003ctd\u003e10 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet dimensions\u003c\/th\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eChoose the R2000A if heavy rust, scale or paint on steel is your daily work and you want maximum CW speed with no chiller.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoose the R1500A if your contamination is lighter or less frequent and the lower price matters more than the extra 500 W.\u003c\/strong\u003e\u003c\/p\u003e\u003ch3 style=\"color: #7f1d1d;\"\u003eFrequently Asked Questions about the MCWlaser R2000A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: What can the R2000A remove?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e \u003cstrong\u003eHeavy rust, mill scale, multi-coat paint, oxides, oil and coatings\u003c\/strong\u003e from carbon steel, stainless steel, galvanized sheet and other metals. Its 2,000 W output is aimed at large steel surfaces and heavy contamination.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How is a 2,000 W air-cooled cleaner possible without a chiller?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser uses an \u003cstrong\u003eintegrated air-cooling system with upgraded cooling and exhaust paths\u003c\/strong\u003e to move heat out of the cabinet. It needs \u003cstrong\u003eclear airflow\u003c\/strong\u003e around the vents and an ambient temperature of \u003cstrong\u003e0–38 °C\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Should I choose continuous-wave or pulsed?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Choose \u003cstrong\u003econtinuous-wave\u003c\/strong\u003e for heavy rust, scale and paint on steel, where speed per dollar matters most. Choose \u003cstrong\u003epulsed\u003c\/strong\u003e for thin sheet, molds, aluminum and finished parts, where heat input must be minimal.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What electrical service does it need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser lists \u003cstrong\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/strong\u003e for the R Series. Have a qualified electrician verify the \u003cstrong\u003edelivered nameplate and connection requirements\u003c\/strong\u003e.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How does it compare with the water-cooled B2000?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Both are \u003cstrong\u003e2,000 W Raycus CW\u003c\/strong\u003e cleaners. The R2000A is far smaller and needs no coolant. The B2000 is a larger, \u003cstrong\u003e210 kg water-cooled cabinet\u003c\/strong\u003e with a published 10–300 mm scan-width range, suited to a dedicated cleaning bay.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How long is the fiber lead?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e \u003cstrong\u003e10 m standard\u003c\/strong\u003e, customizable per MCWlaser. That gives the operator wide reach around trailers, frames and installed equipment.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Can I clean thin sheet metal with it?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e For \u003cstrong\u003ethin or finished metal\u003c\/strong\u003e, compare a pulsed model on a sample of the actual work. Continuous-wave cleaning can transfer more heat into the part. Inspect the \u003cstrong\u003efinish and part condition\u003c\/strong\u003e before approving it for production.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What safety equipment do I need?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Plan a \u003cstrong\u003elaser-controlled work area\u003c\/strong\u003e with suitable guarding and fume extraction. Have a qualified laser safety lead assess reflections and specify \u003cstrong\u003ewavelength-rated protection\u003c\/strong\u003e for everyone in the area.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What warranty is included?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e MCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: Why buy the R2000A from The Maker's Chest?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e We carry \u003cstrong\u003eair-cooled, water-cooled and pulsed cleaners\u003c\/strong\u003e, so we can compare all three against your work honestly. We also help with electrical prep, fume extraction and purchasing, drawing on experience supplying \u003cstrong\u003euniversities, schools and businesses\u003c\/strong\u003e.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003ch6 style=\"color: #7f1d1d;\"\u003eMCWlaser R2000A Specifications:\u003c\/h6\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eR2000A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e2,000 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus continuous-wave fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking mode\u003c\/th\u003e\n\u003ctd\u003eContinuous or modulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e1,080 ± 10 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eIntegrated air cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput power\u003c\/th\u003e\n\u003ctd\u003e220 V AC, 50\/60 Hz, 16 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber cable\u003c\/th\u003e\n\u003ctd\u003e10 m standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl\u003c\/th\u003e\n\u003ctd\u003eTouchscreen with power, mode and live data display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplicable materials\u003c\/th\u003e\n\u003ctd\u003eCarbon steel, stainless steel, galvanized sheet and other metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003e697 × 360 × 532 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0–38 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch5\u003eWarranty\u003c\/h5\u003e\u003cp\u003eMCWlaser’s published warranty lists \u003cstrong\u003e2 Years for the fiber laser source\u003c\/strong\u003e and \u003cstrong\u003e1 Year for other covered accessories\u003c\/strong\u003e. Consumables are excluded. Contact The Maker’s Chest for the coverage and return terms that apply to your order.\u003c\/p\u003e","brand":"MCWlaser","offers":[{"title":"Default Title","offer_id":58369229160614,"sku":"FCM-LX-R2000A","price":10649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/mcwlaser-3-g0.png?v=1794722535"},{"product_id":"hanten-seagull5-1000w-pulsed-laser-cleaning-machine","title":"HantenCNC SEAGULL5 1000W Pulsed Laser Cleaning Machine","description":"\u003ch2\u003e1000W Pulsed Laser Cleaning Machine Rated for Up to 25 m² of Rust and 15 m² of Paint per Hour — Air-Cooled, No Chiller\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe Hanten SEAGULL5 puts \u003cstrong\u003e1000W\u003c\/strong\u003e of JPT pulsed output in a \u003cstrong\u003e53 kg\u003c\/strong\u003e air-cooled, trunk-style cabinet with dual-brake wheels, a cleaning head \u003cstrong\u003eunder 2 kg\u003c\/strong\u003e, scan widths up to \u003cstrong\u003e360 mm\u003c\/strong\u003e, and standard \u003cstrong\u003esingle-phase 220V\u003c\/strong\u003e input.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/_GnwZWUPk9M?si=ZXKpgsWugcv_vwrp\" title=\"HANTENCNC \n1000W Pulse Laser Cleaning Machine: Versatile Applications for Industrial Cleaning\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eShip hulls, storage tanks, steel structures, and heavy equipment are where pulsed laser cleaning has traditionally hit a wall. Lower-power pulsed units leave a beautiful finish but crawl across large surfaces, and the 1000W pulsed machines that can keep up have usually been heavy, water-cooled cabinets that need a chiller, coolant, freeze protection, and a forklift or a crew to move. That pushes many crews back to sandblasting or chemical strippers for the big jobs, along with the cleanup, masking, and substrate damage that come with them.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eHanten SEAGULL5 1000W Pulsed Laser Cleaning Machine\u003c\/strong\u003e (model HTCM1000) closes that gap. It is the top tier of Hanten's air-cooled SEAGULL line, combining a \u003cstrong\u003e1000W JPT pulsed fiber source\u003c\/strong\u003e with a compact cabinet that one operator can tow, load into a vehicle, and run from a standard single-phase 220V supply. The result is industrial-scale pulsed cleaning that goes to the work instead of waiting for the work to come to it.\u003c\/p\u003e\n\u003ch3\u003eStrip Rust at Up to 25 m² per Hour and Paint at Up to 15 m² per Hour\u003c\/h3\u003e\n\u003cp\u003eHanten rates the SEAGULL5 to remove rust at up to \u003cstrong\u003e25 m² per hour\u003c\/strong\u003e and paint at up to \u003cstrong\u003e15 m² per hour\u003c\/strong\u003e, roughly \u003cstrong\u003ehalf the operating time\u003c\/strong\u003e of a 500W pulsed system on the same job. The reason is average power: at 1000W, twice as much energy reaches the surface every second, so each stroke lifts more contamination and thick layers clear in fewer passes. Hanten reports that its high pulse energy removes thick coatings in a \u003cstrong\u003esingle scan\u003c\/strong\u003e. For a contractor billing by the square foot, or a maintenance department with a fixed shutdown window, halving the time on the surface is where the machine pays for itself: more area cleaned per shift, fewer labor hours per job, and a realistic alternative to blasting on large steel surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-1000w-pulsed-laser-heavy-rust-removal.webp?v=1794828711\" alt=\"Heavy rust removed from steel by 1000W pulsed laser cleaning — Hanten SEAGULL5\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eClean Heavy Rust and Epoxy Without Grinding Into the Base Metal\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL5 is a \u003cstrong\u003epulsed\u003c\/strong\u003e laser, not a continuous-wave one. It fires pulses adjustable from \u003cstrong\u003e30 to 500 ns\u003c\/strong\u003e at \u003cstrong\u003e1 to 4,000 kHz\u003c\/strong\u003e, delivering energy in short, high-peak bursts that vaporize rust, paint, and epoxy faster than heat can soak into the material underneath. A continuous-wave cleaner of similar wattage strips quickly but pours constant heat into the part, which can discolor, warp, or alter thin sections and finished surfaces. Abrasive blasting removes coating by removing some of the substrate along with it. Pulsed cleaning gives you heavy-duty removal while keeping the base material, edges, and profile intact, which matters on aluminum alloys, precision parts, molds, and anything that has to be repainted or inspected afterward.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-1000w-pulsed-laser-cleaning-aluminum-alloy.webp?v=1794828710\" alt=\"Pulsed laser cleaning result on aluminum alloy — Hanten SEAGULL5 1000W\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eRun 1000W Without a Water Chiller: No Pump, No Coolant, No Freeze Protection\u003c\/h3\u003e\n\u003cp\u003eMost 1000W pulsed cleaners rely on water cooling, which adds a chiller, coolant changes, freeze protection in cold weather, and another component that can fail on site. The SEAGULL5 is \u003cstrong\u003eair-cooled\u003c\/strong\u003e, with cabinet ventilation sized to the laser's heat load, and Hanten states the design makes the machine \u003cstrong\u003emore than 50% smaller\u003c\/strong\u003e than comparable water-cooled 1000W units. Hanten reports \u003cstrong\u003e24-hour continuous operation\u003c\/strong\u003e testing on the air-cooled system, and the rated operating range is \u003cstrong\u003e0–40°C\u003c\/strong\u003e. For crews working outdoors, in unheated buildings, or on sites without water access, removing the cooling loop means fewer things to maintain, less to haul, and no winterizing between jobs.\u003c\/p\u003e\n\u003ch3\u003eTow It, Load It, and Wheel It to the Job: Trunk-Style Cabinet on Dual-Brake Wheels\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL5 measures \u003cstrong\u003e745 × 357 × 710 mm\u003c\/strong\u003e and weighs about \u003cstrong\u003e53 kg\u003c\/strong\u003e, built in a luggage-style cabinet with a rotating handle and \u003cstrong\u003efour dual-swivel, dual-brake wheels\u003c\/strong\u003e. Hanten designs it so \u003cstrong\u003eone person\u003c\/strong\u003e can tow and operate it and load it into most vehicle trunks. The double-swivel casters tighten the turning radius for narrow aisles and doorways, absorb vibration on rough ground, and the brakes hold the cabinet in place on uneven surfaces while you work. A 1000W pulsed cleaner that fits in a car changes the business model: shipyards, bridges, tank farms, fabrication shops, and customer sites all become reachable without a truck, a lift gate, or a second crew member.\u003c\/p\u003e\n\u003ch3\u003eWork Comfortably for Long Shifts With a Cleaning Head Under 2 kg\u003c\/h3\u003e\n\u003cp\u003eThe handheld cleaning head weighs \u003cstrong\u003eunder 2 kg\u003c\/strong\u003e and connects through a \u003cstrong\u003e5 m or 10 m fiber cable\u003c\/strong\u003e with a \u003cstrong\u003eQBH\u003c\/strong\u003e interface. Weight in the hand is what limits real productivity on large surfaces: a heavy head tires the operator, slows the stroke, and makes the finish uneven by the end of a shift. A light head held at a consistent distance keeps the cleaning even, and the roughly \u003cstrong\u003e20 mm depth of focus\u003c\/strong\u003e gives the operator a forgiving working window on curved tanks, pipes, and irregular structures where the distance to the surface constantly changes. The longer 10 m fiber option lets the cabinet stay parked while the operator reaches across scaffolding, hull sections, or large equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-1000w-pulsed-laser-oxide-layer-cleaning.webp?v=1794828711\" alt=\"Oxide layer cleaned from metal before and after — Hanten SEAGULL5 1000W pulsed laser cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCover More Area per Stroke With Scan Widths From 120 mm to 360 mm\u003c\/h3\u003e\n\u003cp\u003eSeven field-lens options set the scan width: \u003cstrong\u003eF150 (120 mm), F200 (150 mm), F250 (180 mm), F300 (220 mm), F350 (260 mm), F400 (290 mm), and F500 (360 mm)\u003c\/strong\u003e, with scan speed adjustable from 10 to \u003cstrong\u003e40,000 mm\/s\u003c\/strong\u003e and a scanning frequency of at least \u003cstrong\u003e300 Hz\u003c\/strong\u003e. A 360 mm swath is nearly double the widest field on Hanten's 500W SEAGULL3, which is how a 1000W source turns its extra power into square meters per hour on hulls, plate, and structural steel. Shorter focal lengths concentrate the same energy into a narrower band for welds, recesses, corners, and the most stubborn spots. Matching the lens to the surface is how you get both speed on open areas and control on detail work from one machine.\u003c\/p\u003e\n\u003ch3\u003eMatch Pulse Energy to the Job: 1.5, 5, 15, or 50 mJ Configurations\u003c\/h3\u003e\n\u003cp\u003eHanten builds the SEAGULL5 in four maximum single-pulse-energy configurations: \u003cstrong\u003e1.5 mJ, 5 mJ, 15 mJ, and 50 mJ\u003c\/strong\u003e. Pulse energy is how much light each burst carries, and at a fixed 1000W average power it trades off against repetition rate. Higher-energy configurations hit each spot harder, breaking up thick rust scale, heavy paint, and bonded epoxy in fewer passes. Lower-energy configurations fire many more, smaller pulses for a finer, gentler finish on oxide, oil, residue, stone, and wood. Because the right choice depends on the coatings you remove most often, contact The Maker's Chest to confirm the configuration for your application before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-1000w-pulsed-laser-stone-cleaning.webp?v=1794828711\" alt=\"Stone surface cleaned of oxidation by pulsed laser — Hanten SEAGULL5 1000W\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePlug Into Single-Phase 220V Power: No Three-Phase Service Required\u003c\/h3\u003e\n\u003cp\u003eThe SEAGULL5 runs on \u003cstrong\u003esingle-phase 220V ±10%, 50\/60Hz\u003c\/strong\u003e, the same type of supply used by welders, dryers, and compressors, rather than the three-phase industrial service many high-power cleaners require. Power consumption is \u003cstrong\u003eover 4,000W\u003c\/strong\u003e, so plan a dedicated 220V circuit or a generator sized for that load. For field crews, that means the machine can run from a shop outlet, a job-site panel, or portable generation instead of being tied to a factory floor, and it is one of the main reasons a 1000W pulsed cleaner can realistically live in a service vehicle.\u003c\/p\u003e\n\u003ch3\u003eRemove Paint and Contamination From Wood, Stone, and More\u003c\/h3\u003e\n\u003cp\u003eHanten demonstrates SEAGULL5 results on \u003cstrong\u003epainted wood\u003c\/strong\u003e, \u003cstrong\u003estone oxidation\u003c\/strong\u003e, metal oxide layers, and aluminum alloy as well as heavy rust on steel. Pulsed delivery is what makes those non-metal jobs possible: short pulses remove the coating or stain while limiting heat into the material beneath, which is why pulsed systems are used in restoration, graffiti removal, and heritage work where sanding or chemicals would damage the surface. As with any laser cleaning, test on a small, hidden area first and start with lower settings on delicate materials.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-1000w-pulsed-laser-wood-paint-stripping.webp?v=1794828711\" alt=\"Paint stripped from wood with a pulsed laser — Hanten SEAGULL5 1000W laser cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eProtect the Optics and the Operator: Compressed Air, Fume Extraction, and PPE\u003c\/h3\u003e\n\u003cp\u003eAt 1000W, the volume of vaporized rust and coating is substantial. Hanten recommends an \u003cstrong\u003eair compressor with an oil-water separator\u003c\/strong\u003e for high-power, heavy-dust, or continuous work, because dry, oil-free air blown across the protective lens keeps dust, moisture, and debris off it, which means fewer lens replacements and less downtime. A \u003cstrong\u003esmoke purifier\u003c\/strong\u003e removes dust and fumes from the work area and keeps the beam path clear, and a \u003cstrong\u003eprotective kit\u003c\/strong\u003e (apron, gloves, and shoe covers) shields the operator from scattered laser light and spatter. All three are optional accessories, and The Maker's Chest carries fume extraction systems that can be sized to the job.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHanten SEAGULL5 1000W air-cooled pulsed laser cleaning cabinet (JPT pulsed fiber laser source)\u003c\/li\u003e\n\u003cli\u003eHandheld pulsed laser cleaning head (under 2 kg)\u003c\/li\u003e\n\u003cli\u003eFiber cable with QBH interface (5 m or 10 m)\u003c\/li\u003e\n\u003cli\u003eHanten's standard accessory set, shown below\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-1000w-standard-accessories-included.webp?v=1794828710\" alt=\"Standard accessories included in the box — Hanten SEAGULL5 1000W Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003cp\u003eNot included: air compressor with oil-water separator, smoke purifier, and protective kit (apron, gloves, shoe covers) are optional accessories sold separately.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HTCM1000 (SEAGULL5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser (JPT source)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage Laser Power:\u003c\/strong\u003e ≥1000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Wavelength:\u003c\/strong\u003e 1064 ± 5 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Single Pulse Energy:\u003c\/strong\u003e 1.5 mJ \/ 5 mJ \/ 15 mJ \/ 50 mJ configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 30–500 ns, adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Adjustment Range:\u003c\/strong\u003e 1–4,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Adjustment Range:\u003c\/strong\u003e 0–100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Width:\u003c\/strong\u003e F150 \/ 120 mm; F200 \/ 150 mm; F250 \/ 180 mm; F300 \/ 220 mm; F350 \/ 260 mm; F400 \/ 290 mm; F500 \/ 360 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Speed:\u003c\/strong\u003e 10–40,000 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Scanning Frequency:\u003c\/strong\u003e Not less than 300 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Focus:\u003c\/strong\u003e Approximately 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m \/ 10 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Optic Interface:\u003c\/strong\u003e QBH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Single-phase 220V ±10%, 50\/60Hz AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e Over 4,000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0–40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity:\u003c\/strong\u003e ≤80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Dimensions:\u003c\/strong\u003e 745 × 357 × 710 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e About 53 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Head Weight:\u003c\/strong\u003e Under 2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Mode:\u003c\/strong\u003e Pulsed, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Throughput:\u003c\/strong\u003e Up to 25 m² per hour of rust; up to 15 m² per hour of paint (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE and FDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year on the whole machine and 2 Years on the laser source, with lifetime after-sales support from Hanten. Backed by \u003cstrong\u003e75-day returns\u003c\/strong\u003e through The Maker's Chest.\u003c\/p\u003e\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e📦 \u003cstrong\u003e75-day returns\u003c\/strong\u003e through The Maker's Chest: return the machine unused and in its original packaging within 75 days of delivery (return shipping paid by the customer)\u003c\/li\u003e\n\u003cli\u003e🇺🇸 A U.S.-based support team for questions before and after the sale, alongside Hanten's lifetime remote after-sales support\u003c\/li\u003e\n\u003cli\u003e🎯 Help choosing the right pulse-energy configuration (1.5, 5, 15, or 50 mJ) and field lens for the coatings and surfaces you clean most\u003c\/li\u003e\n\u003cli\u003e⚖️ An honest tier recommendation between this 1000W SEAGULL5 and the 500W SEAGULL3, based on your square footage, coating thickness, and budget\u003c\/li\u003e\n\u003cli\u003e⚡ Straight answers on electrical planning for a 220V single-phase machine drawing over 4,000W, including generator use on job sites\u003c\/li\u003e\n\u003cli\u003e💨 Fume extraction and compressed-air pairing from one retailer, since The Maker's Chest also stocks extraction systems for laser work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHanten SEAGULL5 1000W vs. SEAGULL3 500W: Which Pulsed Laser Cleaner Fits Your Work?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eHanten SEAGULL3 500W\u003c\/th\u003e\n\u003cth\u003eHanten SEAGULL5 1000W\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e500W pulsed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1000W pulsed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse Energy Options\u003c\/td\u003e\n\u003ctd\u003e1.5 \/ 5 \/ 15 mJ\u003c\/td\u003e\n\u003ctd\u003e1.5 \/ 5 \/ 15 \/ 50 mJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Throughput\u003c\/td\u003e\n\u003ctd\u003eUp to 15 m²\/h (20 µm paint or rust)\u003c\/td\u003e\n\u003ctd\u003eUp to 25 m²\/h rust; 15 m²\/h paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLargest Scan Width\u003c\/td\u003e\n\u003ctd\u003e185 × 185 mm (F330)\u003c\/td\u003e\n\u003ctd\u003e360 mm (F500)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Head Weight\u003c\/td\u003e\n\u003ctd\u003eUnder 1.5 kg\u003c\/td\u003e\n\u003ctd\u003eUnder 2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e110V or 220V, no transformer\u003c\/td\u003e\n\u003ctd\u003eSingle-phase 220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eAir-cooled\u003c\/td\u003e\n\u003ctd\u003eAir-cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Dimensions \/ Weight\u003c\/td\u003e\n\u003ctd\u003e595 × 248 × 548 mm \/ 50 kg\u003c\/td\u003e\n\u003ctd\u003e745 × 357 × 710 mm \/ 53 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eHeavy rust and coatings on parts, frames, and mid-size surfaces\u003c\/td\u003e\n\u003ctd\u003eLarge-area industrial work: hulls, tanks, bridges, heavy machinery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the SEAGULL5 1000W if\u003c\/strong\u003e you clean large steel surfaces where throughput drives cost, need the widest scan field and the 50 mJ option for the heaviest coatings, and have 220V power available. \u003cstrong\u003eChoose the SEAGULL3 500W if\u003c\/strong\u003e your work is mostly parts, frames, and mid-size surfaces, you need to run on 110V, or you want a lower investment.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about the Hanten SEAGULL5 1000W Pulsed Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How fast does the SEAGULL5 1000W pulsed laser cleaner remove rust and paint?\u003c\/strong\u003e\u003cbr\u003eA: Hanten rates the SEAGULL5 at up to 25 m² per hour for rust and up to 15 m² per hour for paint, about half the operating time of a 500W pulsed system. Actual speed depends on coating thickness, rust severity, substrate, pulse-energy configuration, lens choice, and operator technique, so treat these as manufacturer ratings rather than a guarantee for every job.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does a 1000W pulsed laser cleaner need a water chiller?\u003c\/strong\u003e\u003cbr\u003eA: Many do, but the SEAGULL5 does not. It is air-cooled, with no water pump, coolant, or freeze protection to manage, and Hanten reports 24-hour continuous operation testing on the air-cooled system. The rated operating temperature range is 0–40°C.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What power supply does the SEAGULL5 need?\u003c\/strong\u003e\u003cbr\u003eA: Single-phase 220V ±10%, 50\/60Hz. It does not need three-phase industrial power, but it draws over 4,000W, so plan a dedicated 220V circuit or a generator sized for that load. Unlike the 500W SEAGULL3, it does not run on 110V.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the SEAGULL5 really portable at 1000W?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The cabinet measures 745 × 357 × 710 mm, weighs about 53 kg, and rolls on four dual-swivel, dual-brake wheels with a rotating tow handle. Hanten designs it to be moved and operated by one person and to fit in most vehicle trunks, and the cleaning head weighs under 2 kg.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between the Hanten SEAGULL5 1000W and the SEAGULL3 500W?\u003c\/strong\u003e\u003cbr\u003eA: Power, throughput, scan width, and electrical requirements. The SEAGULL5 doubles output to 1000W, is rated for up to 25 m² per hour of rust, offers scan widths up to 360 mm, and adds a 50 mJ pulse-energy option, but it requires single-phase 220V. The SEAGULL3 500W has a smaller cabinet, a lighter head, runs on 110V or 220V, and costs less. Both are air-cooled pulsed systems with JPT laser sources.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which pulse energy should I choose: 1.5, 5, 15, or 50 mJ?\u003c\/strong\u003e\u003cbr\u003eA: Choose by the coatings you remove most. Higher pulse energy (15 or 50 mJ) breaks up thick rust scale, heavy paint, and bonded epoxy in fewer passes; lower pulse energy (1.5 or 5 mJ) gives a finer, gentler finish on oxide, oil, residue, stone, and wood. The Maker's Chest can help you confirm the right configuration before you order.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is a pulsed laser cleaner different from a continuous-wave (CW) laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: Pulsed lasers fire short, high-peak-power bursts that vaporize contamination with minimal heat transfer into the base material, which protects thin sections, aluminum, precision parts, and finished surfaces. Continuous-wave cleaners run a constant beam and are generally cheaper per watt, but put more heat into the part. The SEAGULL5 is a pulsed system.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the SEAGULL5 clean materials other than steel?\u003c\/strong\u003e\u003cbr\u003eA: Hanten shows SEAGULL5 results on aluminum alloy, metal oxide layers, stone, and painted wood in addition to rusted steel. Always test on a small, hidden area first and start with lower settings on delicate surfaces.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need an air compressor and a fume extractor?\u003c\/strong\u003e\u003cbr\u003eA: Both are strongly recommended. Hanten recommends an air compressor with an oil-water separator for high-power, heavy-dust, or continuous work to protect the lens, and a smoke purifier to remove dust and fumes. Both are optional accessories sold separately, and at 1000W the volume of vaporized material makes extraction especially important.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need special training or certification to operate it?\u003c\/strong\u003e\u003cbr\u003eA: No certification is required to buy it, but this is high-power industrial laser equipment. It requires laser-rated safety eyewear for the 1064 nm wavelength, a controlled work area, caution around reflective surfaces, and proper fume handling. Read the manufacturer's safety documentation before first use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What warranty, returns, and support come with the SEAGULL5?\u003c\/strong\u003e\u003cbr\u003eA: Hanten provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source, plus lifetime after-sales support with remote guidance. Through The Maker's Chest you also get 75-day returns: return the unit unused and in its original packaging within 75 days of delivery, with return shipping paid by the customer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy through The Maker's Chest instead of directly from Hanten?\u003c\/strong\u003e\u003cbr\u003eA: Hanten is a manufacturer based in Jinan, China. Buying through The Maker's Chest gives you 75-day returns, a U.S.-based team for questions on pulse-energy configuration, lens selection, power requirements, compressed air, and fume extraction, and the option to pair the machine with extraction equipment from one retailer.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eHanten SEAGULL5 1000W Pulsed Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e HTCM1000 (SEAGULL5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser (JPT source)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage Laser Power:\u003c\/strong\u003e ≥1000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Wavelength:\u003c\/strong\u003e 1064 ± 5 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Single Pulse Energy:\u003c\/strong\u003e 1.5 mJ \/ 5 mJ \/ 15 mJ \/ 50 mJ configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 30–500 ns, adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Adjustment Range:\u003c\/strong\u003e 1–4,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Adjustment Range:\u003c\/strong\u003e 0–100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Width:\u003c\/strong\u003e F150 \/ 120 mm; F200 \/ 150 mm; F250 \/ 180 mm; F300 \/ 220 mm; F350 \/ 260 mm; F400 \/ 290 mm; F500 \/ 360 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScan Speed:\u003c\/strong\u003e 10–40,000 mm\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Scanning Frequency:\u003c\/strong\u003e Not less than 300 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth of Focus:\u003c\/strong\u003e Approximately 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m \/ 10 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Optic Interface:\u003c\/strong\u003e QBH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air-cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Single-phase 220V ±10%, 50\/60Hz AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e Over 4,000W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0–40°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity:\u003c\/strong\u003e ≤80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Dimensions:\u003c\/strong\u003e 745 × 357 × 710 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Weight:\u003c\/strong\u003e About 53 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Head Weight:\u003c\/strong\u003e Under 2 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Mode:\u003c\/strong\u003e Pulsed, handheld\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Throughput:\u003c\/strong\u003e Up to 25 m² per hour of rust; up to 15 m² per hour of paint (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE and FDA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003ch6\u003eHanten SEAGULL5 1000W Pulsed Laser Cleaning Machine Warranty Details:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eHanten SEAGULL5 1000W comes with a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e on the whole machine and a \u003cstrong\u003e2-year warranty\u003c\/strong\u003e on the laser source, with lifetime after-sales support from Hanten.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Day Returns\u003c\/strong\u003e through The Maker's Chest: return your unit unused and in its original packaging \u003cstrong\u003ewithin 75 days\u003c\/strong\u003e of delivery (return shipping paid by the customer).\u003c\/li\u003e\n\u003cli\u003eDedicated, \u003cstrong\u003eU.S.-based support\u003c\/strong\u003e from The Maker's Chest for questions before and after the sale.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HantenCNC","offers":[{"title":"1.5 mJ","offer_id":58454441590950,"sku":"HANTEN-SEAGULL5-1000W-1","price":27420.0,"currency_code":"USD","in_stock":true},{"title":"5 mJ","offer_id":58454441623718,"sku":"HANTEN-SEAGULL5-1000W-2","price":27420.0,"currency_code":"USD","in_stock":true},{"title":"15 mJ","offer_id":58454441656486,"sku":"HANTEN-SEAGULL5-1000W-3","price":27420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/hanten-seagull5-cover.png?v=1794843928"},{"product_id":"sfx-apc-300-300w-air-cooled-pulsed-laser-cleaning-machine","title":"SFX APC-300 300W Air-Cooled Pulsed Laser Cleaning Machine","description":"\u003ch2\u003eThe 300W Pulsed Laser Cleaner Built to Strip Wood Finishes, Rust and Paint Without Burning the Surface Underneath\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe SFX APC-300 pairs a \u003cstrong\u003e300W pulsed fiber laser\u003c\/strong\u003e with a double-wobble cleaning head, \u003cstrong\u003e6 preset + 3 custom\u003c\/strong\u003e cleaning programs, wide-range \u003cstrong\u003e110–220V\u003c\/strong\u003e input and IoT remote support in a compact air-cooled cabinet.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/sso_4eni0LI\" title=\"SFX Laser APC-300 IOT Laser Air-Cooled Cleaning Machine Promotional Video\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eMost laser cleaners are built for steel. Point one at a walnut tabletop, an antique carving or a painted door frame and the risk is obvious: scorch marks, charred grain and a surface that needs more repair than it did before you started. Sanding and chemical strippers avoid the burn, but they eat time, round over detail and leave dust or solvent to deal with.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSFX APC-300\u003c\/strong\u003e is SFX Laser's specialized wood-cleaning model. It uses what SFX calls \u003cstrong\u003eintelligent slow-release pulse technology\u003c\/strong\u003e to lift finishes, stains, rust and paint with short, controlled bursts of energy, so the contaminant vaporizes before heat can build in the substrate. It still handles the metal work a pulsed cleaner is known for (rust, oxide, oil and coatings), which makes it a practical single machine for restorers, mold shops, auto repair and maintenance crews who move between materials.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClean Wood Without Scorching the Grain\u003c\/h3\u003e\n\u003cp\u003eSFX built the APC series specifically for wood, and describes the light source as soft and controllable so it removes the top layer with \u003cstrong\u003ezero damage to the substrate surface\u003c\/strong\u003e. That matters because wood is far less forgiving than steel: a continuous-wave laser or an aggressive pulse leaves a dark burn line the moment it lingers. The APC-300's pulsed delivery keeps the energy in short bursts, so furniture restorers, cultural-relic conservators and cabinet shops can strip old finish, water stains or graffiti from wood while keeping the grain and carved detail intact. SFX notes one honest limit: pure clear lacquer absorbs laser light poorly, so clear-coat-only finishes clean less effectively than pigmented paint or stain.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/APC300_APC500_Pulse_Laser_Cleaner_Wood_Paint_Mold_Oxide_Layer_Cleaning_Q1012.jpg?v=1795012540\" alt=\"Wood, paint, mold and oxide cleaning results — SFX APC-300 Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eSwitch Between Rust, Paint, Oil, Oxide and Wood in One Tap\u003c\/h3\u003e\n\u003cp\u003eThe control panel ships with \u003cstrong\u003esix preset cleaning processes\u003c\/strong\u003e covering rust, oil, paint, coating, oxide and wood, plus \u003cstrong\u003ethree custom slots\u003c\/strong\u003e you can save and recall at any time. Instead of experimenting with frequency and power every time the job changes, an operator selects the matching preset and starts cleaning. For a shop that restores a rusted brake drum in the morning and a painted dresser in the afternoon, that turns setup from a trial-and-error exercise into a single selection, and it keeps results consistent from one operator to the next.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eCover Up to 100 mm per Pass With a Double-Wobble Head and 7 Scan Patterns\u003c\/h3\u003e\n\u003cp\u003eThe APC-300 uses a \u003cstrong\u003edouble-wobble cleaning head\u003c\/strong\u003e with a scanning width adjustable from \u003cstrong\u003e0 to 100 mm\u003c\/strong\u003e and seven graphic modes. A narrow line concentrates energy on welds, recesses and tight carving, while the full width sweeps flat panels and tabletops quickly. Being able to match the pattern to the part is what lets one handheld head handle both detail restoration and broad surface prep without swapping hardware.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003ePlug Into 110V or 220V With No Chiller to Maintain\u003c\/h3\u003e\n\u003cp\u003eThe cabinet accepts \u003cstrong\u003eAC 110–220V ±10%\u003c\/strong\u003e and draws about \u003cstrong\u003e1.5 kW\u003c\/strong\u003e, so it runs from a standard North American outlet as well as a 220V shop circuit. Cooling is fully air-based: there is no water tank to fill, no coolant to freeze in an unheated garage and no chiller to service. The integrated structure measures \u003cstrong\u003e575 × 390 × 510 mm\u003c\/strong\u003e, about 0.12 m³, which SFX describes as maintenance-free and easy to carry to a job site. SFX reports testing the APC series at \u003cstrong\u003e40°C for 8 hours of continuous operation\u003c\/strong\u003e without power attenuation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/SFX_APC_300W_500W_Laser_Cleaning_Machine_Product_Details.jpg?v=1795012540\" alt=\"Cabinet and cleaning head product details — SFX APC-300 Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eGet Remote Help From Your Phone With IoT Interconnection\u003c\/h3\u003e\n\u003cp\u003eThe APC-300 is the IoT version of the series. Through \u003cstrong\u003eintelligent interconnection\u003c\/strong\u003e you can adjust parameters from a smartphone with one-click control, and SFX's technical team can run \u003cstrong\u003eonline diagnosis\u003c\/strong\u003e remotely to resolve issues without waiting for a site visit. For a business that depends on the machine being available, remote diagnostics shorten downtime when a setting or error code needs a second opinion.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/APC200_20APC300_20Laser_20Cleaner_20with_20Intelligent_20Interconnection.jpg?v=1795012540\" alt=\"Smartphone remote control and online diagnosis feature — SFX APC-300 IoT Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eWhy the APC-300 Instead of SFX's AGC-300\u003c\/h3\u003e\n\u003cp\u003eSFX sells two 300W air-cooled pulsed cleaners, and both handle rust, plating, oil and coating removal. The difference is the beam: the \u003cstrong\u003eAPC-300's slow-release pulse\u003c\/strong\u003e has the edge on mold cleaning and wood, while the AGC-300's super-focused spot topology is better suited to oxide films and roughening highly reflective metals. If wood restoration, molds or mixed-material work is part of your business, the APC-300 is the better fit.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSFX APC-300 (IoT) air-cooled pulsed laser cleaning cabinet\u003c\/li\u003e\n\u003cli\u003eHandheld double-wobble cleaning head with 5 m fiber cable\u003c\/li\u003e\n\u003cli\u003eSFX user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe self-propelled automatic drive device (APC-300 IoT+ configuration) is not included with this model.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e APC-300 (IoT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 300W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1070 ± 10 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 10–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation Frequency:\u003c\/strong\u003e 1–3,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanning Width:\u003c\/strong\u003e 0–100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Programs:\u003c\/strong\u003e 6 presets + 3 custom; 7 scan patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e AC 110–220V ±10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature \/ Humidity:\u003c\/strong\u003e -5°C to 37°C \/ 40–80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Size:\u003c\/strong\u003e 575 × 390 × 510 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Size:\u003c\/strong\u003e 680 × 460 × 660 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e IoT smartphone control and remote online diagnosis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year on the whole machine and 2 Years on the laser source (consumables such as protective lenses and nozzles are not covered), plus lifetime online technical support from SFX Laser and U.S. after-sales service centers in New York and California.\u003c\/p\u003e\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🚚 \u003cstrong\u003eShipping to your door is included in the price\u003c\/strong\u003e, so the number you see at checkout is the number you pay for the machine and its delivery\u003c\/li\u003e\n\u003cli\u003e🇺🇸 A \u003cstrong\u003eU.S.-based Maker's Chest team\u003c\/strong\u003e for questions before and after the sale, working alongside SFX Laser's New York and California service centers\u003c\/li\u003e\n\u003cli\u003e🎯 An honest recommendation between the APC-300, the higher-output APC-500 and SFX's continuous-wave SLC cleaners, based on your materials and square footage\u003c\/li\u003e\n\u003cli\u003e🪵 Practical guidance on wood work, including which finishes clean well and why clear lacquer is the exception\u003c\/li\u003e\n\u003cli\u003e💨 Fume extraction from the same retailer: The Maker's Chest stocks extraction systems sized for the smoke and particulate that laser cleaning and welding produce\u003c\/li\u003e\n\u003cli\u003e🏫 Experience supplying laser equipment to universities, fabrication shops and production businesses, so we can talk through your application, not just the spec sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSFX APC-300 vs. APC-500: Which Pulsed Laser Cleaner Fits Your Work?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eSFX APC-300\u003c\/th\u003e\n\u003cth\u003eSFX APC-500\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e300W pulsed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e500W pulsed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScanning Width\u003c\/td\u003e\n\u003ctd\u003e0–100 mm\u003c\/td\u003e\n\u003ctd\u003e0–120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Power\u003c\/td\u003e\n\u003ctd\u003e1.5 kW\u003c\/td\u003e\n\u003ctd\u003e2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiber Cable\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Size\u003c\/td\u003e\n\u003ctd\u003e575 × 390 × 510 mm\u003c\/td\u003e\n\u003ctd\u003e630 × 425 × 630 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 110–220V\u003c\/td\u003e\n\u003ctd\u003eAC 110–220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eWood restoration, molds, detailed work\u003c\/td\u003e\n\u003ctd\u003eLarger surfaces and faster coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the APC-300 if\u003c\/strong\u003e most of your work is restoration, molds or detailed parts and you want the smaller cabinet at a lower investment. \u003cstrong\u003eChoose the APC-500 if\u003c\/strong\u003e you clean larger surfaces where wider coverage and more power per pass save labor hours.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about the SFX APC-300 300W Air-Cooled Pulsed Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the SFX APC-300 clean wood without burning it?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The APC series is SFX Laser's specialized wood-cleaning line, using a slow-release pulse that removes finishes, stains and paint without damaging the substrate. Always test on a hidden area first and start at lower settings on soft or thin woods. Pure clear lacquer absorbs laser light poorly, so it cleans less effectively than pigmented paint or stain.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between the APC-300 and the APC-500?\u003c\/strong\u003e\u003cbr\u003eA: Power and coverage. The APC-500 delivers 500W with a scanning width up to 120 mm and draws about 2 kW, while the APC-300 delivers 300W with up to 100 mm of width in a smaller 575 × 390 × 510 mm cabinet. Both are air-cooled, run on 110–220V and share the same presets and IoT features. Choose the APC-500 when throughput on large areas matters more than budget.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does it run on a standard 110V outlet?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The APC-300 accepts AC 110–220V ±10% and draws about 1.5 kW, so it works from a standard North American outlet or a 220V circuit with no transformer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does it need a water chiller?\u003c\/strong\u003e\u003cbr\u003eA: No. The APC-300 is fully air-cooled, so there is no water tank, coolant or freeze protection to manage. SFX tested the series at 40°C for 8 hours of continuous operation without power loss.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What can the APC-300 clean besides wood?\u003c\/strong\u003e\u003cbr\u003eA: Rust, paint, oil, coatings, oxide layers and plating on metal, plus mold cleaning. SFX lists wooden furniture and cultural-relic restoration, precision mold cleaning, automobile repair, rubber molds, rail transportation and equipment maintenance as typical applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What does IoT mean on this model?\u003c\/strong\u003e\u003cbr\u003eA: The APC-300 (IoT) connects to a smartphone for one-click control and real-time parameter adjustment, and lets SFX's technical team run online diagnosis remotely. The IoT+ version adds a self-propelled drive device; this listing is the IoT model without it.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is a pulsed laser cleaner better than a continuous-wave cleaner?\u003c\/strong\u003e\u003cbr\u003eA: For delicate or mixed materials, yes. Pulsed lasers fire short, high-peak bursts that vaporize contamination with minimal heat transfer, which is why they suit wood, molds and thin parts. Continuous-wave cleaners such as SFX's SLC series strip heavy rust from steel faster but put more heat into the part and are not designed for wood.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need safety equipment?\u003c\/strong\u003e\u003cbr\u003eA: Yes. Use laser safety eyewear rated for the 1070 nm wavelength, keep bystanders out of the work area and use fume extraction, since vaporized paint and finishes produce smoke and fine particulate.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What warranty and support come with the APC-300?\u003c\/strong\u003e\u003cbr\u003eA: SFX Laser provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source (consumables excluded), lifetime online technical support and U.S. after-sales service centers in New York and California. The Maker's Chest also supports you directly from the U.S.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy the APC-300 from The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003eA: You get the same SFX warranty with shipping included in the price, a U.S.-based team to help you choose between pulsed and continuous-wave cleaners, and fume extraction from the same retailer, from a team that has supplied laser equipment to universities and businesses.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eSFX APC-300 300W Air-Cooled Pulsed Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e APC-300 (IoT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 300W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1070 ± 10 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 10–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation Frequency:\u003c\/strong\u003e 1–3,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanning Width:\u003c\/strong\u003e 0–100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Programs:\u003c\/strong\u003e 6 presets + 3 custom; 7 scan patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e AC 110–220V ±10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 1.5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature \/ Humidity:\u003c\/strong\u003e -5°C to 37°C \/ 40–80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Size:\u003c\/strong\u003e 575 × 390 × 510 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Size:\u003c\/strong\u003e 680 × 460 × 660 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e IoT smartphone control and remote online diagnosis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003ch6\u003eSFX APC-300 300W Air-Cooled Pulsed Laser Cleaning Machine Warranty Details:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eThe SFX APC-300 300W Air-Cooled Pulsed Laser Cleaning Machine comes with a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e on the whole machine and a \u003cstrong\u003e2-year warranty\u003c\/strong\u003e on the laser source. Consumables are not covered.\u003c\/li\u003e\n\u003cli\u003eLifetime online technical support and remote diagnosis from SFX Laser, with U.S. after-sales service centers in New York and California.\u003c\/li\u003e\n\u003cli\u003eDedicated, \u003cstrong\u003eU.S.-based support\u003c\/strong\u003e from The Maker's Chest for questions before and after the sale.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SFX Laser","offers":[{"title":"Default Title","offer_id":58468095131814,"sku":"SFX-APC-300","price":10899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/SFX_APC300_Laser_Cleaning_Machine.jpg?v=1795012540"},{"product_id":"sfx-apc-500-500w-air-cooled-pulsed-laser-cleaning-machine","title":"SFX APC-500 500W Air-Cooled Pulsed Laser Cleaning Machine","description":"\u003ch2\u003e500W of Pulsed Laser Power That Cleans Wood, Rust and Paint Faster, From a Standard 110V Outlet\u003c\/h2\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003e\u003cem\u003eThe SFX APC-500 delivers \u003cstrong\u003e500W pulsed output\u003c\/strong\u003e across a scanning width of up to \u003cstrong\u003e120 mm\u003c\/strong\u003e, with 6 preset + 3 custom programs, IoT remote support and \u003cstrong\u003eair cooling\u003c\/strong\u003e in a cabinet that runs on 110–220V.\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/wtKDfUAVqKk\" title=\"SFX APC Series Laser Cleaning Machine Product Display\" style=\"display: block; width: 100%; aspect-ratio: 16 \/ 9; height: auto; min-height: 320px; border: 0; margin-bottom: 16px;\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eA 300W pulsed cleaner is precise, but on a full set of kitchen cabinets, a stripped boat hull or a run of rusty equipment frames, precision alone does not pay the bills. What separates a profitable laser cleaning job from a slow one is how much surface you clear per hour without damaging the part underneath.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eSFX APC-500\u003c\/strong\u003e is the high-output model in SFX Laser's APC series, the line SFX designed specifically for wood. It keeps the gentle, controllable slow-release pulse that lets the series clean wood without scorching, and adds \u003cstrong\u003eroughly two-thirds more power\u003c\/strong\u003e and a wider 120 mm scan. The result is a single air-cooled machine that moves from furniture restoration to metal rust removal to mold cleaning, at a pace that suits contractors and production shops.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClear More Surface per Hour With 500W and a 120 mm Scan\u003c\/h3\u003e\n\u003cp\u003eThe APC-500 pairs \u003cstrong\u003e500W of pulsed power\u003c\/strong\u003e with a double-wobble head that scans up to \u003cstrong\u003e120 mm wide\u003c\/strong\u003e, compared with 300W and 100 mm on the APC-300. More average power means more energy reaches the surface every second, so heavier finishes and rust come off in fewer passes, and the wider sweep covers more area with each stroke. For a contractor billing by the job, that combination is what turns a two-day strip into a one-day strip while keeping the pulsed, low-heat behavior that protects the substrate.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eStrip Wood Finishes Without Charring the Grain\u003c\/h3\u003e\n\u003cp\u003eLike the rest of the APC line, the APC-500 is a \u003cstrong\u003especialized laser wood cleaning machine\u003c\/strong\u003e. SFX describes its light source as soft, controllable and non-destructive, so it lifts paint, stain, water marks and graffiti from wood while leaving the grain intact. That makes it a credible alternative to sanding and chemical stripping for furniture restorers, heritage conservators and millwork shops, without dust clouds or solvent waste. Clear-only lacquer is the exception SFX calls out: it absorbs laser light poorly and cleans less effectively than pigmented coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/APC300_APC500_Pulse_Laser_Cleaner_Wood_Paint_Mold_Oxide_Layer_Cleaning_Q1012_b599fd0a-edf2-4be4-a614-9a8acb33524c.jpg?v=1795012603\" alt=\"Wood, paint, mold and oxide cleaning results — SFX APC-500 Pulsed Laser Cleaning Machine\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eRecall the Right Settings Every Time With 9 Program Slots\u003c\/h3\u003e\n\u003cp\u003eSix \u003cstrong\u003epreset cleaning processes\u003c\/strong\u003e cover rust, oil, paint, coating, oxide and wood, and \u003cstrong\u003ethree custom slots\u003c\/strong\u003e store your own tuned settings for recurring jobs. A seven-pattern scanning menu shapes the beam into lines and areas for welds, edges or broad panels. Operators stop re-tuning between jobs, new staff get repeatable results faster, and the machine behaves the same way on Friday as it did on Monday.\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eRun It Anywhere: 110–220V Input and Air Cooling\u003c\/h3\u003e\n\u003cp\u003eThe APC-500 accepts \u003cstrong\u003eAC 110–220V ±10%\u003c\/strong\u003e and draws about \u003cstrong\u003e2 kW\u003c\/strong\u003e, so it does not force an electrical upgrade before the first job. Cooling is fully air-based, which removes the chiller, coolant and freeze risk that come with water-cooled units and keeps the cabinet to \u003cstrong\u003e630 × 425 × 630 mm\u003c\/strong\u003e. SFX reports testing the series at 40°C for 8 hours of continuous operation without power attenuation, so it holds output through long shifts in a hot shop.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/SFX_APC_300W_500W_Laser_Cleaning_Machine_Product_Details_9b009845-c902-4694-8e00-66da1c0552e7.jpg?v=1795012603\" alt=\"Cabinet and cleaning head product details — SFX APC-500 Pulsed Laser Cleaner\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eGet Faster Answers With Smartphone Control and Online Diagnosis\u003c\/h3\u003e\n\u003cp\u003eAs an IoT model, the APC-500 supports \u003cstrong\u003eone-click smartphone control\u003c\/strong\u003e with real-time parameter adjustment, and SFX's technical team can connect for \u003cstrong\u003eonline diagnosis\u003c\/strong\u003e to resolve issues remotely. When a machine is part of your revenue, remote support that does not depend on a technician visit keeps downtime short.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/APC200_20APC300_20Laser_20Cleaner_20with_20Intelligent_20Interconnection_5aacf424-2798-49b2-85ea-12e53682367d.jpg?v=1795012603\" alt=\"Smartphone remote control and online diagnosis on the APC series — SFX APC-500\" style=\"display: block; width: 100%; height: auto; margin: 16px 0;\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"color: #7f1d1d;\"\u003eClean Molds, Machinery and Vehicles as Well as Wood\u003c\/h3\u003e\n\u003cp\u003eSFX lists wooden furniture and cultural-relic restoration, \u003cstrong\u003eprecision mold cleaning\u003c\/strong\u003e, automobile repair, rubber molds, high-end machinery, rail transportation and maintenance as core applications. Pulsed delivery keeps heat out of tooling surfaces, so molds come back clean without the dimensional risk of abrasive blasting, and the same machine handles rust and coatings on vehicle parts and equipment.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSFX APC-500 (IoT) air-cooled pulsed laser cleaning cabinet\u003c\/li\u003e\n\u003cli\u003eHandheld double-wobble cleaning head with 5 m fiber cable\u003c\/li\u003e\n\u003cli\u003eSFX user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe self-propelled automatic drive device (APC-500 IoT+ configuration) is not included with this model.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e APC-500 (IoT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1070 ± 10 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 10–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation Frequency:\u003c\/strong\u003e 1–3,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanning Width:\u003c\/strong\u003e 0–120 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Programs:\u003c\/strong\u003e 6 presets + 3 custom; 7 scan patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e AC 110–220V ±10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature \/ Humidity:\u003c\/strong\u003e -5°C to 37°C \/ 40–80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Size:\u003c\/strong\u003e 630 × 425 × 630 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Size:\u003c\/strong\u003e 700 × 500 × 770 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e IoT smartphone control and remote online diagnosis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 Year on the whole machine and 2 Years on the laser source (consumables such as protective lenses and nozzles are not covered), plus lifetime online technical support from SFX Laser and U.S. after-sales service centers in New York and California.\u003c\/p\u003e\n\u003ch2\u003eThe Maker's Chest Difference\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e🚚 \u003cstrong\u003eShipping to your door is included in the price\u003c\/strong\u003e, so the number you see at checkout is the number you pay for the machine and its delivery\u003c\/li\u003e\n\u003cli\u003e🇺🇸 A \u003cstrong\u003eU.S.-based Maker's Chest team\u003c\/strong\u003e for questions before and after the sale, working alongside SFX Laser's New York and California service centers\u003c\/li\u003e\n\u003cli\u003e🎯 A straight answer on whether your work needs the APC-500's extra power or whether the APC-300 will do, based on surface area and coating thickness\u003c\/li\u003e\n\u003cli\u003e🧰 Help planning a laser cleaning service business, from typical applications to safety equipment and extraction\u003c\/li\u003e\n\u003cli\u003e💨 Fume extraction from the same retailer: The Maker's Chest stocks extraction systems sized for the smoke and particulate that laser cleaning and welding produce\u003c\/li\u003e\n\u003cli\u003e🏫 Experience supplying laser equipment to universities, fabrication shops and production businesses, so we can talk through your application, not just the spec sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSFX APC-300 vs. APC-500: Which Pulsed Laser Cleaner Fits Your Work?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eSFX APC-300\u003c\/th\u003e\n\u003cth\u003eSFX APC-500\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser Power\u003c\/td\u003e\n\u003ctd\u003e300W pulsed\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e500W pulsed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScanning Width\u003c\/td\u003e\n\u003ctd\u003e0–100 mm\u003c\/td\u003e\n\u003ctd\u003e0–120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Power\u003c\/td\u003e\n\u003ctd\u003e1.5 kW\u003c\/td\u003e\n\u003ctd\u003e2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiber Cable\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003ctd\u003e5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Size\u003c\/td\u003e\n\u003ctd\u003e575 × 390 × 510 mm\u003c\/td\u003e\n\u003ctd\u003e630 × 425 × 630 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 110–220V\u003c\/td\u003e\n\u003ctd\u003eAC 110–220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest for\u003c\/td\u003e\n\u003ctd\u003eWood restoration, molds, detailed work\u003c\/td\u003e\n\u003ctd\u003eLarger surfaces and faster coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the APC-300 if\u003c\/strong\u003e most of your work is restoration, molds or detailed parts and you want the smaller cabinet at a lower investment. \u003cstrong\u003eChoose the APC-500 if\u003c\/strong\u003e you clean larger surfaces where wider coverage and more power per pass save labor hours.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions about the SFX APC-500 500W Air-Cooled Pulsed Laser Cleaning Machine\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How much faster is the APC-500 than the APC-300?\u003c\/strong\u003e\u003cbr\u003eA: SFX does not publish a fixed speed ratio, but the APC-500 has 500W instead of 300W and a 120 mm scanning width instead of 100 mm. In practice that means fewer passes on heavy finishes and rust and more area covered per stroke. Actual speed depends on the coating, its thickness and the substrate.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the APC-500 clean wood?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The APC series is SFX's specialized laser wood cleaning line, designed to remove paint, stain and finishes without damaging the surface. Test on a hidden area first; pure clear lacquer cleans less effectively because it absorbs laser light poorly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the APC-500 run on 110V?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It accepts AC 110–220V ±10% and draws about 2 kW, so it can run from a North American outlet or a 220V circuit with no transformer.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is the APC-500 water-cooled?\u003c\/strong\u003e\u003cbr\u003eA: No. It is fully air-cooled, so there is no chiller, coolant or freeze protection to manage. SFX tested the series for 8 hours of continuous operation at 40°C without power attenuation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What fiber cable length comes with this model?\u003c\/strong\u003e\u003cbr\u003eA: This listing is the APC-500 with a 5 m fiber cable. SFX also builds a 10 m version; contact The Maker's Chest if you need the longer reach.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What's the difference between a pulsed and a continuous-wave laser cleaner?\u003c\/strong\u003e\u003cbr\u003eA: A pulsed cleaner fires short, high-peak bursts that remove contamination with minimal heat transfer, which suits wood, molds and thin parts. A continuous-wave cleaner, such as SFX's SLC series, strips heavy rust from steel quickly but puts more heat into the part and is not designed for wood.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What applications is the APC-500 best for?\u003c\/strong\u003e\u003cbr\u003eA: Furniture and cultural-relic restoration, precision mold and rubber mold cleaning, automobile repair, high-end machinery maintenance and rail transportation work, plus rust, paint, oil, coating and oxide removal on metal.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What safety equipment do I need?\u003c\/strong\u003e\u003cbr\u003eA: Laser safety eyewear rated for the 1070 nm wavelength, a controlled work area and fume extraction for the smoke and particulate produced by vaporized coatings.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What warranty comes with the APC-500?\u003c\/strong\u003e\u003cbr\u003eA: SFX Laser provides a 1-year warranty on the whole machine and a 2-year warranty on the laser source (consumables excluded), with lifetime online support and U.S. service centers in New York and California.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why buy the APC-500 from The Maker's Chest?\u003c\/strong\u003e\u003cbr\u003eA: Shipping is included in the price, you get a U.S.-based team to help size the machine to your work, and you can add fume extraction from the same retailer, from a team that supplies laser equipment to universities and businesses.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch6\u003eSFX APC-500 500W Air-Cooled Pulsed Laser Cleaning Machine Specifications:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e APC-500 (IoT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Type:\u003c\/strong\u003e Pulsed fiber laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Power:\u003c\/strong\u003e 500W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Wavelength:\u003c\/strong\u003e 1070 ± 10 nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Mode:\u003c\/strong\u003e Pulse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Width:\u003c\/strong\u003e 10–500 ns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation Frequency:\u003c\/strong\u003e 1–3,000 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber Cable Length:\u003c\/strong\u003e 5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanning Width:\u003c\/strong\u003e 0–120 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Programs:\u003c\/strong\u003e 6 presets + 3 custom; 7 scan patterns\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e AC 110–220V ±10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Power:\u003c\/strong\u003e 2 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Method:\u003c\/strong\u003e Air cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient Temperature \/ Humidity:\u003c\/strong\u003e -5°C to 37°C \/ 40–80%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Size:\u003c\/strong\u003e 630 × 425 × 630 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging Size:\u003c\/strong\u003e 700 × 500 × 770 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e IoT smartphone control and remote online diagnosis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003ch6\u003eSFX APC-500 500W Air-Cooled Pulsed Laser Cleaning Machine Warranty Details:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eThe SFX APC-500 500W Air-Cooled Pulsed Laser Cleaning Machine comes with a \u003cstrong\u003e1-year warranty\u003c\/strong\u003e on the whole machine and a \u003cstrong\u003e2-year warranty\u003c\/strong\u003e on the laser source. Consumables are not covered.\u003c\/li\u003e\n\u003cli\u003eLifetime online technical support and remote diagnosis from SFX Laser, with U.S. after-sales service centers in New York and California.\u003c\/li\u003e\n\u003cli\u003eDedicated, \u003cstrong\u003eU.S.-based support\u003c\/strong\u003e from The Maker's Chest for questions before and after the sale.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"SFX Laser","offers":[{"title":"Default Title","offer_id":58468117971110,"sku":"SFX-APC-500","price":16899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/files\/SFX_Laser_200W_300W_Air_Cooled_Portable_Laser_Cleaner_Rust_Wood_Paint_Coating_Oil_Stains_Remover_Specialized_Wood_Cleaning_Paint_Cleaning__1760004759213_20.webp?v=1795070204"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/6833\/2890\/collections\/SEAGULL5_E2_84_A2-1000W-air-cooling-pulsed-laser-cleaning-machine-HANTENCNC.webp?v=1794956526","url":"https:\/\/themakerschest.com\/collections\/portable-laser-cleaning-machines.oembed","provider":"The Maker's Chest","version":"1.0","type":"link"}